Experimental validation of thermo-mechanical part-scale modeling for laser powder bed fusion processes

Kruth, 1998, Progress in additive manufacturing and rapid prototyping, Cirp Ann., 47, 525, 10.1016/S0007-8506(07)63240-5 Levy, 2003, Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives, CIRP Annals-Manuf. Technol., 52, 589, 10.1016/S0007-8506(07)60206-6 Goldak, 1986, Computer modeling of heat flow in welds, Metal. Trans. B, 17, 587, 10.1007/BF02670226 Michaleris, 1995, Analysis and optimization of weakly coupled thermoelastoplastic systems with applications to weldment design, Int. J. Numer. Methods Eng., 38, 1259, 10.1002/nme.1620380803 Lindgren, 2001, Finite element modeling and simulation of welding part 1: increased complexity, J. Thermal Stress., 24, 141, 10.1080/01495730150500442 hosh S, Choi J. Three-dimensional transient finite element analysis for residual stresses in the laser aided direct metal/material deposition process. J. Laser Appl. 17.(3). Anca, 2011, Computational modelling of shaped metal deposition, Int. J. Numer. Methods Eng., 85, 84, 10.1002/nme.2959 Heigel, 2014, Thermo-Mechanical Model Development and Validation of DirectedEnergy Deposition Additive Manufacturing of Ti-6Al-4V, Addit. Manuf.. Denlinger, 2014, Residual stress and distortion modeling of electron beam direct manufacturing Ti-6Al-4V. Proceedings of the Institution of Mechanical Engineers, Part B, J. Eng. Manuf. Gouge, 2017, Fixturing effects in the thermal modeling of laser cladding, J. Manuf. Sci. Eng., 139, 011001, 10.1115/1.4034136 Denlinger, 2017, Thermomechanical model development and in situ experimental validation of the Laser Powder-Bed Fusion process, Addit. Manuf., 16, 73, 10.1016/j.addma.2017.05.001 Roberts, 2009, A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing, Int. J. Mach. Tools Manuf., 49, 916, 10.1016/j.ijmachtools.2009.07.004 Foroozmehr, 2016, Finite element simulation of selective laser melting process considering optical penetration depth of laser in powder bed, Mater. Design, 89, 255, 10.1016/j.matdes.2015.10.002 Gouge, 2018, The Finite Element Method for the Thermo-Mechanical Modeling of Additive Manufacturing Processes, 19 Kolossov, 2004, 3D FE simulation for temperature evolution in the selective laser sintering process, Int. J. Mach. Tools Manuf., 44, 117, 10.1016/j.ijmachtools.2003.10.019 Patil, 2007, Finite element analysis of temperature distribution in single metallic powder layer during metal laser sintering, Int. J. Mach. Tools Manuf., 47, 1069, 10.1016/j.ijmachtools.2006.09.025 Yin, 2012, Simulation of temperature distribution in single metallic powder layer for laser micro-sintering, Comput. Mater. Sci., 53, 333, 10.1016/j.commatsci.2011.09.012 Hussein, 2013, Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting, Mater. Design (1980–2015)., 52, 638, 10.1016/j.matdes.2013.05.070 Hodge, 2013 Ltdc:Živčák, 2016, FEA simulation of thermal processes during the direct metal laser sintering of Ti64 titanium powder, Measurement, 94, 893, 10.1016/j.measurement.2016.07.072 Denlinger, 2016, Thermal modeling of Inconel 718 processed with powder bed fusion and experimental validation using in situ measurements, Addit. Manuf., 11, 7, 10.1016/j.addma.2016.03.003 Keller, 2017, Application of finite element, phase-field, and CALPHAD-based methods to additive manufacturing of Ni-based superalloys, Acta Mater., 139, 244, 10.1016/j.actamat.2017.05.003 Van Belle, 2012, Comparisons of numerical modelling of the Selective Laser Melting, 1067 Fu, 2014, 3-Dimensional finite element modeling of selective laser melting Ti-6Al-4V alloy, 25th Annual International Solid Freeform Fabrication Symposium Price, 2014, On process temperature in powder-bed electron beam additive manufacturing: process parameter effects, J. Manuf. Sci. Eng., 136, 061019, 10.1115/1.4028485 Hodge, 2016, Experimental comparison of residual stresses for a thermomechanical model for the simulation of selective laser melting, Addit. Manuf., 12, 159, 10.1016/j.addma.2016.05.011 Michaleris, 2006, Evaluation of 2D, 3D and applied plastic strain methods for predicting buckling welding distortion and residual stress, Sci. Technol. Weld. Joining, 11, 707, 10.1179/174329306X147724 Huang, 2016, Prediction of laser welding induced deformation in thin sheets by efficient numerical modeling, J. Mater. Process. Technol., 227, 117, 10.1016/j.jmatprotec.2015.08.002 Keller, 2014, New method for fast predictions of residual stress and distortion of AM parts., Solid Freeform Fabrication Symposium (SFF), Austin, TX, Aug;, 4 ÇELEBİ A, APPAVURAVTHER EZ. Analyzing the Effect of Voxel-Based Surface Mesh Application on Residual Stress with Simufact Additive Software. Harley A, Quinn J, Mc Fadden S. A REVIEW OF THERMAL MODELLING FOR METAL ADDITIVE MANUFACTURING PROCESSES: BASIC ANALYTICAL MODELS TO STATE-OF-THE-ART SOFTWARE PACKAGES.. Bugatti, 2018, Limitations of the Inherent Strain Method in Simulating Powder Bed Fusion Processes, Addit. Manuf., 10.1016/j.addma.2018.05.041 Liang, 2018, A modified method for estimating inherent strains from detailed process simulation for fast residual distortion prediction of single-walled structures fabricated by directed energy deposition, Addit. Manuf., 23, 471, 10.1016/j.addma.2018.08.029 Zaeh, 2010, Investigations on residual stresses and deformations in selective laser melting, Product. Eng., 4, 35, 10.1007/s11740-009-0192-y Papadakis, 2012, Numerical modeling of heat effects during thermal manufacturing of aero engine components, Proceedings of the World Congress on Engineering. vol. 3 Li, 2017, Efficient predictive model of part distortion and residual stress in selective laser melting, Addit. Manuf., 17, 157, 10.1016/j.addma.2017.08.014 Pal, 2014, An integrated approach to additive manufacturing simulations using physics based, coupled multiscale process modeling, J. Manuf. Sci. Eng., 136, 061022, 10.1115/1.4028580 Francois, 2017, Modeling of additive manufacturing processes for metals: Challenges and opportunities, Curr. Opin. Solid State Mater. Sci., 21, 10.1016/j.cossms.2016.12.001 Li, 2016, A multiscale modeling approach for fast prediction of part distortion in selective laser melting, J. Mater. Process. Technol., 229, 703, 10.1016/j.jmatprotec.2015.10.022 Arısoy, 2017, Influence of scan strategy and process parameters on microstructure and its optimization in additively manufactured nickel alloy 625 via laser powder bed fusion, Int. J. Adv. Manuf. Technol., 90, 1393, 10.1007/s00170-016-9429-z Goldak, 2006 Li, 2019, Estimation of part-to-powder heat losses as surface convection in laser powder bed fusion, Addit. Manuf., 26, 258, 10.1016/j.addma.2019.02.006 Neiva, 2018, A scalable parallel finite element framework for growing geometries, Application to metal additive manufacturing. Preprint., 1 Denlinger, 2014, Thermomechanical modeling of additive manufacturing large parts, J. Manuf. Sci. Eng., 136, 061007, 10.1115/1.4028669 Cook, 2007 Powell, 1966, 8 Mills, 2002 Sih, 2004, The prediction of the emissivity and thermal conductivity of powder beds, Particulate Sci. Technol., 22, 427, 10.1080/02726350490501682 Goldak, 1984, A new finite element model for welding heat sources, Metal. Trans. B, 15, 299, 10.1007/BF02667333 Dunbar, 2016, Development of experimental method for in situ distortion and temperature measurements during the laser powder bed fusion additive manufacturing process, Addit. Manuf., 12, 25, 10.1016/j.addma.2016.04.007 Michaleris, 2011