Development and performance of sand fog seal with cooling and air purification effects

Z. Liu, Asphalt Pavement preventive maintenance technology overview. 3rd International Conference on Civil. Architectural and Hydraulic Engineering (ICCAHE), Hangzhou, CHINA, Appl. Mech. Mater., 638–640 (2014) 1135–1138. Gong, 2016, Effectiveness analyses of flexible pavement preventive maintenance treatments with LTPP SPS-3 experiment data, J. Transp. Eng., 142, 10.1061/(ASCE)TE.1943-5436.0000818 Guntor, 2014, Thermal performance of developed coating material as cool pavement material for tropical regions, J. Mater. Civil Eng., 26, 755, 10.1061/(ASCE)MT.1943-5533.0000859 Mallick, 2009, Harvesting energy from asphalt pavements and reducing the heat island effect, Int. J. Sustainable Eng., 2, 214, 10.1080/19397030903121950 Santos, 2017, Environmental and economic assessment of pavement construction and management practices for enhancing pavement sustainability, Resour. Conserv. Recycl., 116, 15, 10.1016/j.resconrec.2016.08.025 Liu, 2015, Photocatalytic degradation of vehicle exhausts on asphalt pavement by TiO2 /rubber composite structure, Constr. Build. Mater., 81, 224, 10.1016/j.conbuildmat.2015.02.034 Peng, 2015, Evaluation system for CO2 emission of hot asphalt mixture, J. Traffic Transport. Eng.: Engl. Edition, 2, 116 Wang, 2016, Photocatalytic pavements with epoxy-bonded TiO2 -containing spreading material, Constr. Build. Mater., 107, 44, 10.1016/j.conbuildmat.2015.12.164 California Department of Transportation (CADOT). Fog Seal Guidelines, 2003. Im, 2015, Performance evaluation of fog seals on chip seals and verification of fog seal field tests, Can. J. Civ. Eng., 42, 872, 10.1139/cjce-2014-0340 Pratico, 2015, Macrotexture modeling and experimental validation for pavement surface treatments, Constr. Build. Mater., 95, 658, 10.1016/j.conbuildmat.2015.07.061 Im, 2013, Methods for fog seal field test with polymer-modified emulsions development and performance evaluation, Transp. Res. Rec. J. Transp. Res. Board, 2361, 88, 10.3141/2361-11 Cheng, 2015, Performance evaluation of fog and rejuvenating seals on gap and open graded surfaces by Caltrans, Int. J. Pavement Res. Technol., 8, 159 Qureshi, 2013, Effects of rejuvenator seal and fog seal on performance of open-graded friction course pavement, Maejo Int. J. Sci. Technol., 7, 189 Prapaitrakul, 2007, Assessing the ability of fog seals to seal pavements, to rejuvenate in situ binder, and to retard binder oxidation, Asphalt Pavements Prapaitrakul, 2010, Fog seal treatment effectiveness analysis of pavement binders using the t-test statistical approach, Pet. Sci. Technol., 28, 1895, 10.1080/10916460903330007 Heritage, 2013, Rare double fog seal among techniques for Oklahoma road, Pavement Preserv. J., 6, 23 G. Larry, D. Wang, X. Chen, C. Lei. Quantitative evaluation of fog seals on pavement skid resistance with indoor accelerated loading tests. Transportation Research Board 90th Annual Meeting, 2011. N.H. Tran, D. Watson, N.A. Qureshi. Effect of using fog seals without sanding on surface friction and durability of open-graded friction course. Transportation Research Board 91st Annual Meeting, 2012. J. Zhang, P. Luo, L. Xu, X. Ma, Laboratory study on the permeability and skid resistance of asphalt pavement fog seal layer. 15th COTA International Conference of Transportation Professionals, 2015, 949–956. Zhang, 2014, Application of fog seal technology in modern highway maintenance, Transp. Standardization, 42, 194 Prapaitrakul, 2010, Comparative study on recovered binder properties using three asphalt emulsion recovery methods, J. Test. Eval., 38, 653 Richardson, 2013, Inverted hybrid solar cells based on pyrite FeS2 nanocrystals in P3HT: PCBM with enhanced photocurrent and air-stability, Sol. Energy Mater. Sol. Cells, 116, 252, 10.1016/j.solmat.2013.05.014 ASTM, 2009 2011 2012 Zhang, 2010, Preparation and characterization of FeS2/polyaniline composite electrode in lithium-ion battery, J. Aust. Ceram. Soc., 48, 189 Žic, 2007, 57Fe mössbauer, FT-IR and FE SEM investigation of the formation of hematite and goethite at high ph values, J. Mol. Struct., 834–836, 141, 10.1016/j.molstruc.2006.10.030 Szczech, 2011, Enhancement of the thermoelectric properties in nanoscale and nanostructured materials, J. Mater. Chem., 21, 4037, 10.1039/C0JM02755C Biswas, 2011, Strained endotaxial nanostructures with high thermoelectric figure of merit, Nat. Chem., 3, 160, 10.1038/nchem.955 Lineykin, 2007, Modeling and analysis of thermoelectric modules, IEEE Trans. Ind. Appl., 43, 505, 10.1109/TIA.2006.889813 Tritt, 2011, Thermoelectric phenomena, materials, and applications, Annu. Rev. Mater. Res., 41, 433, 10.1146/annurev-matsci-062910-100453 Zhao, 2014, A review of thermoelectric cooling: materials, modeling and applications, Appl. Therm. Eng., 66, 15, 10.1016/j.applthermaleng.2014.01.074 Lee, 2011, Polarity control of carrier injection at ferroelectric/metal interfaces for electrically switchable diode and photovoltaic effects, Phys. Rev. B, 84, 10.1103/PhysRevB.84.125305 Akihiro, 1996, Pyroelectric effect and possible ferroelectric transition of helimagnetic, J. Phys.: Condens. Matter, 8, 2673