Lubrication performance of MoS2 and SiO2 nanoparticles as lubricant additives in magnesium alloy-steel contacts

Jiang, 2014, Strain-hardening and warm deformation behaviors of extruded Mg–Sn–Yb alloy sheet, J Magnes Alloy, 2, 116, 10.1016/j.jma.2014.05.004 Zhang, 2014, Deep drawability and drawing behaviour of AZ31 alloy sheets with different initial texture, J Alloy Compd, 615, 302, 10.1016/j.jallcom.2014.06.199 Selda Ucuncuoglu, 2014, Effect of asymmetric rolling process on the microstructure, mechanical properties and texture of AZ31 magnesium alloys sheets produced by twin roll casting technique, J Magnes Alloy, 2, 92, 10.1016/j.jma.2014.02.001 Podgornik, 2015, Tribological behaviour and lubrication performance of hexagonal boron nitride (h-BN) as a replacement for graphite in aluminium forming, Tribol Int, 81, 267, 10.1016/j.triboint.2014.09.011 Huang, 2006, Tribological characteristics of magnesium alloy using N-containing compounds as lubricating additives during sliding, Wear, 260, 140, 10.1016/j.wear.2004.12.039 Huang, 2005, Effect of chemical structure of borates on the tribological characteristics of magnesium alloy during sliding, Tribol Int, 38, 775, 10.1016/j.triboint.2004.11.007 Xia, 2010 Tang, 2014, A review of recent developments of friction modifiers for liquid lubricants (2007–present), Curr Opin Solid State Mater Sci, 18, 119, 10.1016/j.cossms.2014.02.002 Sayuti, 2014, Investigation on the morphology of the machined surface in end milling of aerospace AL6061-T6 for novel uses of SiO2 nanolubrication system, J Clean Prod, 66, 655, 10.1016/j.jclepro.2013.11.058 Flores-Castañeda, 2015, Bismuth nanoparticles synthesized by laser ablation in lubricant oils for tribological tests, J Alloy Compd, 643, S67, 10.1016/j.jallcom.2014.12.054 Sayuti, 2013, An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy, Int J Adv Manuf Tech, 67, 833, 10.1007/s00170-012-4527-z Praveena, 2012, Friction between a steel ball and a steel flat lubricated by MoS2 particles suspended in hexadecane at 150°C, Ind Eng Chem Res, 51, 12321 Dallavalle, 2012, Stability, dynamics, and lubrication of MoS2 platelets and nanotubes, Langmuir, 28, 7393, 10.1021/la300871q Wan, 2014, Rheological and tribological behaviour of lubricating oils containing platelet MoS2 nanoparticles, J Nanoparticle Res, 16, 2386, 10.1007/s11051-014-2386-2 Lahouij, 2012, IF-MoS2 based lubricants: influence of size, shape and crystal structure, Wear, 296, 558, 10.1016/j.wear.2012.07.016 Rabaso, 2014, Boundary lubrication: influence of the size and structure of inorganic fullerene-like MoS2 nanoparticles on friction and wear reduction, Wear, 320, 161, 10.1016/j.wear.2014.09.001 Hu, 2009, Tribological properties of molybdenum disulfide nanosheets by monolayer restacking process as additive in liquid paraffin, Tribol Int, 42, 33, 10.1016/j.triboint.2008.05.016 Kogovšek, 2013, Influence of surface roughness and running-in on the lubrication of steel surfaces with oil containing MoS2 nanotubes in all lubrication regimes, Tribol Int, 61, 40, 10.1016/j.triboint.2012.12.003 Mosleh, 2009, Modification of sheet metal forming fluids with dispersed nanoparticles for improved lubrication, Wear, 267, 1220, 10.1016/j.wear.2008.12.074 Kalin, 2014, The formation of tribofilms of MoS2 nanotubes on steel and DLC-coated surfaces, Tribol Lett, 55, 381, 10.1007/s11249-014-0366-4 Kogovšek, 2013, Lubrication of DLC-coated surfaces with MoS2 nanotubes in all lubrication regimes: surface roughness and running-in effects, Wear, 303, 361, 10.1016/j.wear.2013.03.033 Tannous, 2010, Understanding the tribochemical mechanisms of IF-MoS2 nanoparticles under boundary lubrication, Tribol Lett, 41, 55, 10.1007/s11249-010-9678-1 Pujante, 2013, Investigations into wear and galling mechanism of aluminium alloy-tool steel tribopair at different temperatures, Wear, 308, 193, 10.1016/j.wear.2013.06.015 Sayuti, 2012, An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy, Int J Adv Manuf Tech, 67, 833, 10.1007/s00170-012-4527-z Xu, 2015, Formation and tribological properties of hollow sphere-like nano-MoS2 precipitated in TiO2 particles, Tribol Int, 81, 139, 10.1016/j.triboint.2014.08.012 Rahmati, 2014, Morphology of surface generated by end milling AL6061-T6 using molybdenum disulfide (MoS2) nanolubrication in end milling machining, J Clean Prod, 66, 685, 10.1016/j.jclepro.2013.10.048 Sia, 2014, Development of SiO2 nanolubrication system to be used in sliding bearings, Int J Adv Manuf Tech, 71, 1277, 10.1007/s00170-013-5566-9 Hu, 2011, Synergistic effect of nano-MoS2 and anatase nano-TiO2 on the lubrication properties of MoS2/TiO2 nano-clusters, Tribol Lett, 43, 77, 10.1007/s11249-011-9789-3 Nan, 2014, Effect of natural attapulgite powders as lubrication additive on the friction and wear performance of a steel tribo-pair, Appl Surf Sci, 307, 86, 10.1016/j.apsusc.2014.03.170 Hu, 2010, The Effect of morphology on the tribological properties of MoS2 in liquid paraffin, Tribol Lett, 40, 155, 10.1007/s11249-010-9651-z Peng, 2010, Size effects of SiO2 nanoparticles as oil additives on tribology of lubricant, Ind Lubr Tribol, 62, 111, 10.1108/00368791011025656 Kato, 2007, Tribofilm formation and mild wear by tribo-sintering of nanometer-sized oxide particles on rubbing steel surfaces, Wear, 262, 36, 10.1016/j.wear.2006.03.046 Sayuti, 2012, An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy, Int J Adv Manuf Technol, 67, 833, 10.1007/s00170-012-4527-z Sayuti, 2014, Novel uses of SiO2 nano-lubrication system in hard turning process of hardened steel AISI4140 for less tool wear, surface roughness and oil consumption, J Clean Prod, 67, 265, 10.1016/j.jclepro.2013.12.052 Rapoport, 2003, Tribological properties of WS2 nanoparticles under mixed lubrication, Wear, 255, 785, 10.1016/S0043-1648(03)00044-9 Tannous, 2011, Understanding the tribochemical mechanisms of IF-MoS2 nanoparticles under boundary lubrication, 41, 55 Koroteev, 2011, Formation of MoS2 nanoparticles on the surface of reduced graphite oxide, Phys Status Solidi B, 248, 2740, 10.1002/pssb.201100123 Fang, 2011, Friction and wear performances of magnesium alloy against steel under lubrication of rapeseed oil with S-containing additive, Trans Nonferr Met Soc China, 21, 2649, 10.1016/S1003-6326(11)61105-9