Vibration analysis in high speed rough and finish milling hardened steel

Y. Altintas, Modelling approaches and software for predicting the performance of milling operations at MAL—UBC, in: Proceedings of the Third CIRP International Workshop on Modelling of Machining Operations, Sydney, Australia, 2000, pp. 60–74. Altintas, 1992, In-process detection and suppression of chatter in milling, International Journal of Machine Tools and Manufacture, 32, 329, 10.1016/0890-6955(92)90006-3 Hashimoto, 1996, Experimental research on cutting force variation during primary vibration occurring in plain milling operation, International Journal of Machine Tools and Manufacture, 36, 183, 10.1016/0890-6955(95)98760-5 Dimla, 2000, Sensor signals for tool wear monitoring in metal cutting operations—a review of methods, International Journal of Machine Tools and Manufacture, 40, 1073, 10.1016/S0890-6955(99)00122-4 Y. Ning, M. Rahman, Y.S. Wong, Monitoring of chatter in high speed end milling using audio signals method, in: Proceedings of the 33rd International MATADOR Conference, Manchester, England, 2000, pp. 421–426. Dimla, 2000, On-line metal cutting tool condition monitoring. I, International Journal of Machine Tools and Manufacture, 40, 739, 10.1016/S0890-6955(99)00084-X T. Ishikawa, Y. Yamada, Fracture detection of cutting edge in multi- point tools, in: Transactions of the North American Manufacturing Research Institution of SME, North American Manufacturing Research Conference (NAMRC XVI), Urbana, IL, USA, 1988, pp. 183–188. Li, 2000, Modelling and simulation of chatter in milling using a predictive force model, International Journal of Machine Tools and Manufacture, 40, 2047, 10.1016/S0890-6955(00)00042-0 Ko, 2001, Surface integrity and machinability in intermittent hard turning, International Journal of Advanced Manufacturing Technology, 18, 168, 10.1007/s001700170072 Jang, 1996, Study of the correlation between surface roughness and cutting vibrations to develop an on-line roughness measuring technique in hard turning, International Journal of Machine Tools and Manufacture, 36, 453, 10.1016/0890-6955(95)00074-7 El-Wardany, 1996, Tool condition monitoring in drilling using vibration signature analysis, International Journal of Machine Tools and Manufacture, 36, 687, 10.1016/0890-6955(95)00058-5 Youn, 2001, A study on the relationships between static/dynamic cutting force components and tool wear, Journal of Manufacturing Science and Engineering, Transactions of the American Society of Mechanical Engineers, 123, 196, 10.1115/1.1362321 Sarhan, 2001, Interrelationships between cutting force variation and tool wear in end milling, Journal of Materials Processing Technology, 109, 229, 10.1016/S0924-0136(00)00803-7 Elbestawi, 1991, In-process monitoring of tool wear in milling using cutting force signature, International Journal of Machine Tools and Manufacture, 31, 55, 10.1016/0890-6955(91)90051-4 M.C. Lu, E.K. Saibu, Analysis of sound signal characteristics associated with adhesive wear in machining, in: Transactions of the North American Manufacturing Research Institution of SME, North American Manufacturing Research Conference (NAMRC XXVIII), Lexington, KY, USA, 2000, pp. 257–262. A.B. Sadat, Tool wear measurement and monitoring techniques for automated machining cells, in: H. Masudi (Ed.), Tribology Symposium, PD-Vol. 61, American Society of Mechanical Engineers, New York, 1994, pp. 103–115. Sadat, 1987, Detection of tool flank wear using acoustic signature analysis, Wear, 115, 265, 10.1016/0043-1648(87)90216-X Tonshoff, 2000, Using acoustic emission signals for monitoring of production processes, Ultrasonics, 37, 681, 10.1016/S0041-624X(00)00026-3 Lee, 1989, On the correlation between dynamic cutting force and tool wear, International Journal of Machine Tools and Manufacture, 29, 295, 10.1016/0890-6955(89)90001-1 Tool life testing in machining—Part 2, International Standards Organisation–ISO 8688-2, 1989. C.K. Toh, Evaluation of Cutter Path Strategies and Orientations When High Speed Milling Hardened AISI H13 Steel, Ph.D. Thesis, University of Birmingham, Birmingham, 2003. Chiou, 2000, Analysis of acoustic emission in chatter vibration with tool wear effect in turning, International Journal of Machine Tools and Manufacture, 40, 927, 10.1016/S0890-6955(99)00093-0 Ikeda, 1996, High temperature oxidation behaviour of cubic-(Ti,Al)N coatings and its application to cutting tools, Kobelco Technology Review, 19, 12 Y. Yamada, T. Aoki, S. Kitaura, Y. Tanaka, Y. Okazaki, H. Hayasaki, High speed cutting performance of (Al,Ti)N coated carbide end mills for hardened steels, in: Proceedings of the First French and German Conference on High Speed Machining, Metz, France, 1997. Tlusty, 1986, Dynamics of high speed milling, Journal of Engineering for Industry, 108, 59, 10.1115/1.3187052 Lee, 2001, Improvements of the accuracy in the machining of a deep shoulder cut by end milling, Journal of Materials Processing Technology, 111, 244, 10.1016/S0924-0136(01)00527-1 Chiou, 1995, Analysis of tool wear effect on chatter stability in turning, International Journal of Machine Tools and Manufacture, 37, 391