Mechanistic investigation of ciprofloxacin recovery by magnetite–imprinted chitosan nanocomposite: Isotherm, kinetic, thermodynamic and reusability studies

Li, 2017, Zeolitic imidazolate framework-8 derived nanoporous carbon as an effective and recyclable adsorbent for removal of ciprofloxacin antibiotics from water, J. Hazard. Mater., 321, 711, 10.1016/j.jhazmat.2016.09.065 Geissen, 2015, Emerging pollutants in the environment: a challenge for water resource management, Int. Soil Water Conserv. Res., 3, 57, 10.1016/j.iswcr.2015.03.002 Danalıoğlu, 2017, Removal of ciprofloxacin from aqueous solution using humic acid-and levulinic acid-coated Fe3O4 nanoparticles, Chem. Eng. Res. Des., 123, 259, 10.1016/j.cherd.2017.05.018 Yu, 2016, Adsorption removal of ciprofloxacin by multi-walled carbon nanotubes with different oxygen contents from aqueous solutions, Chem. Eng. J., 285, 588, 10.1016/j.cej.2015.10.039 Tran, 2018, Occurrence and fate of emerging contaminants in municipal wastewater treatment plants from different geographical regions-a review, Water Res., 133, 182, 10.1016/j.watres.2017.12.029 Khoshnamvand, 2018, Response surface methodology (RSM) modeling to improve removal of ciprofloxacin from aqueous solutions in photocatalytic process using copper oxide nanoparticles (CuO/UV), AMB Express, 8, 48, 10.1186/s13568-018-0579-2 Cheng, 2018, Halloysite nanotubes as an effective and recyclable adsorbent for removal of low-concentration antibiotics ciprofloxacin, Minerals, 8, 387, 10.3390/min8090387 Ahmadzadeh, 2017, Removal of ciprofloxacin from hospital wastewater using electrocoagulation technique by aluminum electrode: optimization and modelling through response surface methodology, Process Saf. Environ. Prot., 109, 538, 10.1016/j.psep.2017.04.026 De Witte, 2009, Ozonation and advanced oxidation by the peroxone process of ciprofloxacin in water, J. Hazard. Mater., 161, 701, 10.1016/j.jhazmat.2008.04.021 Tahir, 2017, Biopolymers composites with peanut hull waste biomass and application for Crystal Violet adsorption, Int. J. Biol. Macromol., 94, 210, 10.1016/j.ijbiomac.2016.10.013 Qureshi, 2016, Decontamination of ofloxacin: optimization of removal process onto sawdust using response surface methodology, Desalin. Water Treat., 57, 221 Tamer, 2017, Antibacterial and antioxidative activity of O-amine functionalized chitosan, Carbohydr. Polym., 169, 441, 10.1016/j.carbpol.2017.04.027 Zhou, 2018, Enhanced adsorption of pharmaceuticals onto core-brush shaped aromatic rings-functionalized chitosan magnetic composite particles: effects of structural characteristics of both pharmaceuticals and brushes, J. Clean. Prod., 172, 1025, 10.1016/j.jclepro.2017.10.207 Konwar, 2015, Magnetic alginate–Fe 3 O 4 hydrogel fiber capable of ciprofloxacin hydrochloride adsorption/separation in aqueous solution, RSC Adv., 5, 81573, 10.1039/C5RA16404D Yu, 2016, Preparation of the chitosan grafted poly (quaternary ammonium)/Fe 3 O 4 nanoparticles and its adsorption performance for food yellow 3, Carbohydr. Polym., 152, 327, 10.1016/j.carbpol.2016.06.114 Vakili, 2014, Application of chitosan and its derivatives as adsorbents for dye removal from water and wastewater: a review, Carbohydr. Polym., 113, 115, 10.1016/j.carbpol.2014.07.007 Reddy, 2013, Application of magnetic chitosan composites for the removal of toxic metal and dyes from aqueous solutions, Adv. Colloid Interf. Sci., 201, 68, 10.1016/j.cis.2013.10.002 Massoudinejad, 2018, Ethylenediamine-functionalized cubic ZIF-8 for arsenic adsorption from aqueous solution: modeling, isotherms, kinetics and thermodynamics, J. Mol. Liq., 255, 263, 10.1016/j.molliq.2018.01.163 Zulfikar, 2016, Preparation of Fe 3 O 4-chitosan hybrid nano-particles used for humic acid adsorption, Environ. Nanotechnol. Monit. Manag., 6, 64 Peng, 2016, Preparation of a graphitic ordered mesoporous carbon and its application in sorption of ciprofloxacin: kinetics, isotherm, adsorption mechanisms studies, Microporous Mesoporous Mater., 228, 196, 10.1016/j.micromeso.2016.03.047 Alimohammadi, 2017, Adsorptive removal of arsenic and mercury from aqueous solutions by eucalyptus leaves, Water Air Soil Pollut., 228, 429, 10.1007/s11270-017-3607-y Van Thuan, 2017, Response surface methodology approach for optimization of Cu 2+, Ni 2+ and Pb 2+ adsorption using KOH-activated carbon from banana peel, Surf. Interfaces, 6, 209, 10.1016/j.surfin.2016.10.007 Van Tran, 2017, Application of response surface methodology to optimize the fabrication of ZnCl2-activated carbon from sugarcane bagasse for the removal of Cu2+, Water Sci. Technol., 75, 2047, 10.2166/wst.2017.066 Ayazi, 2017, Modeling and optimization of adsorption removal of reactive Orange 13 on the alginate–montmorillonite–polyaniline nanocomposite via response surface methodology, J. Chin. Chem. Soc., 64, 627, 10.1002/jccs.201600876 Massoudinejad, 2016, Adsorption of fluoride over a metal organic framework Uio-66 functionalized with amine groups and optimization with response surface methodology, J. Mol. Liq., 221, 279, 10.1016/j.molliq.2016.05.087 Gupta, 2017, Application of response surface methodology to optimize the adsorption performance of a magnetic graphene oxide nanocomposite adsorbent for removal of methadone from the environment, J. Colloid Interface Sci., 497, 193, 10.1016/j.jcis.2017.03.006 Bandpei, 2017, Optimization of arsenite removal by adsorption onto organically modified montmorillonite clay: experimental & theoretical approaches, Korean J. Chem. Eng., 34, 376, 10.1007/s11814-016-0287-z Geng, 2009, Preparation of chitosan-stabilized Fe0 nanoparticles for removal of hexavalent chromium in water, Sci. Total Environ., 407, 4994, 10.1016/j.scitotenv.2009.05.051 Zulfikar, 2016, Preparation of Fe3O4-chitosan hybrid nano-particles used for humic acid adsorption, Environ. Nanotechnol. Monit. Manage., 6, 64 Ahmadi, 2017, Development of maghemite nanoparticles supported on cross-linked chitosan (γ-Fe2O3@ CS) as a recoverable mesoporous magnetic composite for effective heavy metals removal, J. Mol. Liq., 248, 184, 10.1016/j.molliq.2017.10.014 He, 2010, Magnetic Fe3O4@ chitosan nanoparticle: synthesis, characterization and application as catalyst carrier, J. Nanosci. Nanotechnol., 10, 6348, 10.1166/jnn.2010.2549 Chang, 2005, Preparation and adsorption properties of monodisperse chitosan-bound Fe3O4 magnetic nanoparticles for removal of Cu (II) ions, J. Colloid Interface Sci., 283, 446, 10.1016/j.jcis.2004.09.010 Murugesan, 2014, Modelling of lead (II) ion adsorption onto poly (thiourea imine) functionalized chelating resin using response surface methodology (RSM), J. Water Process Eng., 3, 132, 10.1016/j.jwpe.2014.06.004 Podstawczyk, 2015, Biosorption of copper (II) ions by flax meal: empirical modeling and process optimization by response surface methodology (RSM) and artificial neural network (ANN) simulation, Ecol. Eng., 83, 364, 10.1016/j.ecoleng.2015.07.004 Subramaniam, 2015, Novel adsorbent from agricultural waste (cashew NUT shell) for methylene blue dye removal: optimization by response surface methodology, Water Res. Ind., 11, 64, 10.1016/j.wri.2015.07.002 Sohbatzadeh, 2016, U (VI) biosorption by bi-functionalized Pseudomonas putida@ chitosan bead: modeling and optimization using RSM, Int. J. Biol. Macromol., 89, 647, 10.1016/j.ijbiomac.2016.05.017 Chang, 2012, Application of graphene as a sorbent for preconcentration and determination of trace amounts of chromium (III) in water samples by flame atomic absorption spectrometry, Anal. Methods, 4, 1110, 10.1039/c2ay05650j Yadav, 2018, Removal of fluoroquinolone from aqueous solution using graphene oxide: experimental and computational elucidation, Environ. Sci. Pollut. Res., 25, 2942, 10.1007/s11356-017-0596-8 Peng, 2016, Study of the adsorption mechanisms of ciprofloxacin antibiotics onto graphitic ordered mesoporous carbons, J. Taiwan Inst. Chem. Eng., 65, 472, 10.1016/j.jtice.2016.05.016 Anirudhan, 2017, Nano-zinc oxide incorporated graphene oxide/nanocellulose composite for the adsorption and photo catalytic degradation of ciprofloxacin hydrochloride from aqueous solutions, J. Colloid Interface Sci., 490, 343, 10.1016/j.jcis.2016.11.042 Mao, 2016, Modification of a magnetic carbon composite for ciprofloxacin adsorption, J. Environ. Sci., 49, 179, 10.1016/j.jes.2016.05.048 El-Shafey, 2012, Ciprofloxacin adsorption from aqueous solution onto chemically prepared carbon from date palm leaflets, J. Environ. Sci., 24, 1579, 10.1016/S1001-0742(11)60949-2 Carabineiro, 2012, Comparison between activated carbon, carbon xerogel and carbon nanotubes for the adsorption of the antibiotic ciprofloxacin, Catal. Today, 186, 29, 10.1016/j.cattod.2011.08.020 Shi, 2013, Facile low temperature hydrothermal synthesis of magnetic mesoporous carbon nanocomposite for adsorption removal of ciprofloxacin antibiotics, Ind. Eng. Chem. Res., 52, 2604, 10.1021/ie303036e Li, 2016, Dynamic adsorption of ciprofloxacin on carbon nanofibers: quantitative measurement by in situ fluorescence, J. Water Process Eng., 9, e14, 10.1016/j.jwpe.2014.12.006 Ahmad, 2016, Optimization of the adsorption of Pb (II) from aqueous solution onto PAB nanocomposite using response surface methodology, Environ. Nanotechnol. Monit. Manage., 6, 116 Li, 2017, Cu (II)-influenced adsorption of ciprofloxacin from aqueous solutions by magnetic graphene oxide/nitrilotriacetic acid nanocomposite: competition and enhancement mechanisms, Chem. Eng. J., 319, 219, 10.1016/j.cej.2017.03.016 Asfaram, 2016, Experimental design and modeling of ultrasound assisted simultaneous adsorption of cationic dyes onto ZnS: Mn-NPs-AC from binary mixture, Ultrason. Sonochem., 33, 77, 10.1016/j.ultsonch.2016.04.016 Elwakeel, 2017, Magnetic alginate beads with high basic dye removal potential and excellent regeneration ability, Can. J. Chem., 95, 807, 10.1139/cjc-2016-0641 Tang, 2013, Synthesis of reduced graphene oxide/magnetite composites and investigation of their adsorption performance of fluoroquinolone antibiotics, Colloids Surf. A Physicochem. Eng. Asp., 424, 74, 10.1016/j.colsurfa.2013.02.030 Zhang, 2016, Adsorption of pharmaceuticals on chitosan-based magnetic composite particles with core-brush topology, Chem. Eng. J., 304, 325, 10.1016/j.cej.2016.06.087