The influences of cement type and curing condition on properties of pervious concrete made with electric arc furnace slag as aggregates

A.J. Schokker, The Sustainable Concrete Guide – Strategies and Examples, U.S. Green Concrete Council, 2010. Golden, 2006, Mesoscale and microscale evaluation of surface impacts on the urban heat island effects, Int. J. Pavement Eng., 7, 37, 10.1080/10298430500505325 Marolf, 2004, Influence of aggregate size and gradation on acoustic absorption of enhanced porosity concrete, ACI Mater. J., 101, 82 Park, 2005, Studies on the sound absorption characteristics of porous concrete based on the content of recycled aggregate and target void ratio, Cem. Concr. Res., 35, 1846, 10.1016/j.cemconres.2004.12.009 Park, 2004, An experimental study on the water–purification properties of porous concrete, Cem. Con. Res., 34, 177, 10.1016/S0008-8846(03)00223-0 ACI 522.1-13, Specification for Pervious Concrete Pavement, ACI, 2013. BS 7533-13: 2009, Pavements Constructed with Clay, Natural Stone or Concrete Pavers. Guide for the Design of Permeable Pavements Constructed with Concrete Paving Blocks and Flags, Natural Stone Slabs and Setts and Clay Pavers, British Standard Institution, 2009. ABNT NBR 16416, Pervious Concrete Pavement – Requirements and Procedures, ABNT – Associação Brasileira de Normas Técnicas, 2015. Fu, 2014, The influence of aggregate size and binder material on the properties of pervious concrete, Adv. Mater. Sci. Eng., 10.1155/2014/963971 Fu, 2015, Study of the pervious concrete properties using the experimental design method, Adv. Mater. Res., 1089, 253, 10.4028/www.scientific.net/AMR.1089.253 Crouch, 2007, Aggregate effects on pervious Portland cement concrete static modulus of elasticity, J. Mater. Civ. Eng., 19, 561, 10.1061/(ASCE)0899-1561(2007)19:7(561) Gesoğlu, 2014, Investigating properties of pervious concrete containing waste tire rubbers, Constr. Build. Mater., 63, 206, 10.1016/j.conbuildmat.2014.04.046 Gesoğlu, 2014, Abrasion and freezing-thawing resistance of pervious concrete containing waste rubber, Constr. Build. Mater., 73, 19, 10.1016/j.conbuildmat.2014.09.047 Kuo, 2013, Use of washed municipal solid waste incinerator bottom ash in pervious concrete, Cem. Concr. Compos., 37, 328, 10.1016/j.cemconcomp.2013.01.001 Cheng, 2011, Experimental study on properties of pervious concrete made with recycled aggregate, Int. J. Pavement Res. Technol., 4, 104 Dong, 2013, Investigation into laboratory abrasion test methods for pervious concrete, ASCE J. Mater. Civ. Eng., 25, 886, 10.1061/(ASCE)MT.1943-5533.0000683 Shu, 2011, Performance comparison of laboratory and field produced pervious concrete mixtures, Constr. Build. Mater., 25, 3187, 10.1016/j.conbuildmat.2011.03.002 Wu, 2011, Laboratory evaluation of abrasion resistance of portland cement pervious concrete, ASCE J. Mater. Civ. Eng., 23, 697, 10.1061/(ASCE)MT.1943-5533.0000210 H. Fujiwara, R. Tomita, T. Okamoto, A. Dozono, A. Obatake, Properties of high-strength porous concrete, ACI SP-179 (1998) 173–188. Huang, 2010, Laboratory evaluation of permeability and strength of polymer-modified pervious concrete, Constr. Build. Mater., 24, 818, 10.1016/j.conbuildmat.2009.10.025 Chindaprasirt, 2008, Cement paste characteristics and porous concrete properties, Constr. Build. Mater., 22, 894, 10.1016/j.conbuildmat.2006.12.007 Chindaprasirt, 2009, Effects of cement paste strength and aggregate size on the compressive strength and void ratio of porous concrete, Int. J. Min. Met. Mater., 16, 714 Yang, 2003, Experimental study on properties of pervious concrete pavement materials, Cem. Concr. Res., 33, 381, 10.1016/S0008-8846(02)00966-3 Tho-in, 2012, Pervious high-calcium fly ash geopolymer concrete, Constr. Build. Mater., 30, 366, 10.1016/j.conbuildmat.2011.12.028 Yeih, 2015, Properties of pervious concrete made with air-cooling electric arc furnace slag as aggregates, Constr. Build. Mater., 93, 737, 10.1016/j.conbuildmat.2015.05.104 Chang, 2016, Properties of pervious concrete made with electric arc furnace slag and alkali-activated slag cement, Constr. Build. Mater., 109, 34, 10.1016/j.conbuildmat.2016.01.049 He, 2014, Hydration mechanism of sulphoaluminate cement, J. Wuhan Univ. Technol. Mater. Sci. Ed., 29, 70, 10.1007/s11595-014-0869-8 García-Maté, 2012, Rheological and hydration characterization of calcium sulfoaluminate cement pastes, Cem. Concr. Comp., 34, 684, 10.1016/j.cemconcomp.2012.01.008 Pelletier-Chaignat, 2011, Influence of the calcium sulphate source on the hydration mechanism of portland cement–calcium sulphoaluminate clinker–calcium sulphate binders, Cem. Concr. Comp., 33, 551, 10.1016/j.cemconcomp.2011.03.005 Hidalgo, 2009, Microstructure development in mixes of calcium aluminate cement with silica fume or fly ash, Therm. Anal. Cal., 96, 335, 10.1007/s10973-007-8439-3 Gitzen, 1957, Properties of some calcium aluminate cement compositions, J. Am. Ceram. Soc., 40, 158, 10.1111/j.1151-2916.1957.tb12595.x Ann, 2014, Corrosion resistance of calcium aluminate cement concrete exposed to chloride environment, Materials, 7, 887, 10.3390/ma7020887 ASTM C138/C138M-14, Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete, ASTM International, PA, USA, 2014. Japan Concrete Association, Test methods for properties of porous concrete, draft, 1998 (in Japanese). Japan Road Association, Pavement Testing Manual, Supplement volume, 1996, 317 pp (in Japanese). ASTM C39/C39M-14, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, PA, USA, 2014. ASTM C293/C293M-10, Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading), ASTM International, PA, USA, 2010. S. Mindes, J.F. Young, D. Darwin, Concrete, second ed., Pearson Ed. Inc., NJ, USA, 2003.