Uncertainty modelling in plate buckling

Mansour, 1972, Probabilistic design concepts in ship structural safety and reliability, Trans. Soc. Nav. Archit. Mar. Eng., 80, 64 Faulkner, 1979, Toward a unified approach to ship structural safety, Trans. R. Inst. Nav. Archit., 121, 1 Guedes Soares, 1984, Probabilistic models for load effects in ship structures Guedes Soares, 1985, Uncertainty analysis and code calibration of the primary load effects in ship structures, Vol. III, 501 Ivanov, 1979, Statistical estimation of reduction coefficient of ship's hull plates with initial deflections, Nav. Archit., 158 Guedes Soares, 1981, Survey of methods of prediction of the compressive strength of stiffened plates Guedes Soares, 1983, Behaviour and design of stiffened plates under predominantly compressive loads, Int. Shipbuild. Prog., 30, 13, 10.3233/ISP-1983-3034103 Ueda, 1979, Ultimate strength of a rectangular plate under thrust with consideration of the effects of initial imperfections due to welding, Trans. J. Weld. Res. Inst. of Osaka University, 8, 97 Kmiecik, 1971, Behaviour of axially loaded simply supported long rectangular plates having initial deformations Dow, 1984, Effects of localized imperfections on compressive strength of long rectangular plates, J. Constr. Steel Res., 4, 51, 10.1016/0143-974X(84)90035-X Faulkner, 1975, A review of effective plating for use in the analysis of stiffened plating in bending and compression, J. Ship Res., 19, 1, 10.5957/jsr.1975.19.1.1 Carlsen, 1977, Simplified collapse analysis of stiffened plates, Norw. Marit. Res., 7, 20 Antoniou, 1980, On the maximum deflection of plating in newly built ships, J. Ship Res., 24, 31, 10.5957/jsr.1980.24.1.31 Wierzchowski, 1971, Statistical investigation of the sectional dimensions of ship structural members Galambos, 1978, Properties of steel for use in LRFD, J. Struct. Div. Amer. Soc. Civ. Eng., 104, 1459, 10.1061/JSDEAG.0004988 Sommerville, 1977, Measurements of residual stresses and distortions in stiffened panels, J. Strain Anal., 12, 107, 10.1243/03093247V122107 Harding, 1979, The basis of the proposed new design rules for the strength of web plates and other panels subject to complex edge loading, 355