Inverse geometric optimization for geometry of nanofluid-cooled microchannel heat sink

Applied Thermal Engineering - Tập 55 - Trang 87-94 - 2013
Xiao-Dong Wang1,2, Bin An1,2, Lin Lin3, Duu-Jong Lee4,5
1State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources, North China Electric Power University, Beijing 102206, China
2Beijing Key Laboratory of Multiphase Flow and Heat Transfer for Low Grade Energy, North China Electric Power University, Beijing 102206, China
3Department of Thermal Engineering, School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China
4Department of Chemical Engineering, College of Engineering, National Taiwan University of Science and Technology, Taipei 106, Taiwan
5Department of Chemical Engineering, National Taiwan University, Taipei 106, Taiwan

Tài liệu tham khảo

Tuckerman, 1981, High-performance heat sinking for VLSI, IEEE Electron Device Letter EDL-2, 126, 10.1109/EDL.1981.25367 Wang, 2011, Multi-parameters optimization for microchannel heat sink using inverse problem method, International Journal of Heat and Mass Transfer, 54, 2811, 10.1016/j.ijheatmasstransfer.2011.01.029 Chein, 2005, Analysis of microchannel heat sink performance using nanofluids, Applied Thermal Engineering, 25, 3104, 10.1016/j.applthermaleng.2005.03.008 Ghazvini, 2009, Investigation of a nanofluid-cooled microchannel heat sink using fin and porous media approaches, Energy Conversion and Management, 50, 2373, 10.1016/j.enconman.2009.05.021 Abbassi, 2006, Evaluation of heat transfer augmentation in a nanofluid-cooled microchannel heat sink, Journal of Fusion Energy, 25, 187, 10.1007/s10894-006-9021-x Tsai, 2007, Performance analysis of nanofluid-cooled microchannel heat sinks, International Journal of Heat and Fluid Flow, 28, 1013, 10.1016/j.ijheatfluidflow.2007.01.007 Chen, 2011, Study on the thermal behavior and cooling performance of a nanofluid-cooled microchannel heat sink, International Journal of Thermal Sciences, 50, 378, 10.1016/j.ijthermalsci.2010.04.020 Koo, 2005, Laminar nanofluid flow in microheat-sinks, International Journal of Heat and Mass Transfer, 48, 2652, 10.1016/j.ijheatmasstransfer.2005.01.029 Jang, 2006, Cooling performance of a microchannel heat sink with nanofluids, Applied Thermal Engineering, 26, 2457, 10.1016/j.applthermaleng.2006.02.036 Li, 2008, Thermal performance of nanofluid flow in microchannles, International Journal of Heat and Fluid Flow, 29, 1221, 10.1016/j.ijheatfluidflow.2008.01.005 Escher, 2011, On the cooling of electronics with nanofluids, Journal of Heat Transfer, 133, 051401, 10.1115/1.4003283 Kalteh, 2011, Eulerian–Eulerian two-phase numerical simulation of nanofluid laminar forced convection in a microchannel, International Journal of Heat and Fluid Flow, 32, 107, 10.1016/j.ijheatfluidflow.2010.08.001 Kim, 2004, Method for thermal optimization of microchannel heat sinks, Heat Transfer Engineering, 25, 37, 10.1080/01457630490248359 Ambatipudi, 2000, Analysis of conjugate heat transfer in microchannel heat sinks, Numerical Heat Transfer Part A, 37, 711, 10.1080/104077800274046 Li, 2006, Geometric optimization of a micro heat sink with liquid flow, IEEE Transactions on Components and Packaging Technologies, 29, 145, 10.1109/TCAPT.2005.853170 Li, 2007, 3-Dimensional numerical optimization of silicon-base high performance parallel microchannel heat sink with liquid flow, International Journal of Heat and Mass Transfer, 50, 2895, 10.1016/j.ijheatmasstransfer.2007.01.019 Bello-Ochende, 2007, Constructal cooling channels for microchannel heat sinks, International Journal of Heat and Mass Transfer, 50, 4141, 10.1016/j.ijheatmasstransfer.2007.02.019 Kou, 2008, Optimum thermal performance of microchannel heat sink by adjusting channel width and height, International Communications in Heat and Mass Transfer, 35, 577, 10.1016/j.icheatmasstransfer.2007.12.002 Ryu, 2002, Numerical optimization of the thermal performance of a microchannel heat sink, International Journal of Heat and Mass Transfer, 45, 2823, 10.1016/S0017-9310(02)00006-6 Chen, 2008, Optimal thermal design of microchannel heat sinks by the simulated annealing method, International Communications in Heat and Mass Transfer, 35, 980, 10.1016/j.icheatmasstransfer.2008.04.006 Nguyen, 2007, Temperature and particle-size dependent viscosity data for water-based nanofluids-Hysteresis phenomenon, International Journal of Heat and Fluid Flow, 28, 1492, 10.1016/j.ijheatfluidflow.2007.02.004 Zhao, 2011, Effect of nanofluids on thin film evaporation in microchannels, Journal of Nanoparticle Research, 13, 5033, 10.1007/s11051-011-0484-y Zhao, 2011, Effects of superheat and temperature-dependent thermophysical properties on evaporating thin liquid films in microchannels, International Journal of Heat and Mass Transfer, 54, 1259, 10.1016/j.ijheatmasstransfer.2010.10.026 Yaws, 1999 Das, 2003, Temperature dependence of thermal conductivity enhancement for nanofluids, Journal of Heat Transfer, 125, 567, 10.1115/1.1571080 Xuan, 2000, Conceptions for heat transfer correlation of nanofluids, International Journal of Heat Mass Transfer, 43, 3701, 10.1016/S0017-9310(99)00369-5 Ho, 2010, An experimental investigation of forced convection cooling performance of a microchannel heat sink with Al2O3/water nanofluid, Applied Thermal Engineering, 30, 96, 10.1016/j.applthermaleng.2009.07.003 Wang, 2010, An inverse geometry design problem for optimization of single serpentine flow field of PEM fuel cell, International Journal of Hydrogen Energy, 35, 4247, 10.1016/j.ijhydene.2010.02.059