Thermal-electrochemical coupled simulations for cell-to-cell imbalances in lithium-iron-phosphate based battery packs

Applied Thermal Engineering - Tập 123 - Trang 584-591 - 2017
Hsuan-Han Huang1, Hsun-Yi Chen1, Kuo-Chi Liao1, Hong-Tsu Young2, Ching-Fei Lee3, Jhen-Yang Tien3
1Department of Bio-Industrial Mechatronics Engineering, National Taiwan University, Taiwan, ROC
2Department of Mechanical Engineering, National Taiwan University, Taiwan, ROC
3Phoenix Silicon International Corporation, Taiwan, ROC

Tài liệu tham khảo

MATLAB (R2010a), MATLAB User Manual, Release 7.10.0, USA, 2010. COMSOL Multiphysics 5.0, Burlington, MA, USA, 2014. Scrosati, 2010, Lithium batteries: status, prospects and future, J. Power Sources, 195, 2419, 10.1016/j.jpowsour.2009.11.048 Huang, 2001, Approaching theoretical capacity of LiFePO4 at room temperature at high rates, Electrochem. Solid-State Lett., 4, 10.1149/1.1396695 Kumaresan, 2008, Thermal model for a li-ion cell, J. Electrochem. Soc., 155, 164, 10.1149/1.2817888 Xu, 2014, Review on the heat dissipation performance of battery pack with different structures and operation conditions, Renew. Sustain. Energy Rev., 29, 301, 10.1016/j.rser.2013.08.057 Wang, 2015, Development of efficient air-cooling strategies for lithium-ion battery module based on empirical heat source model, Appl. Therm. Eng., 90, 521, 10.1016/j.applthermaleng.2015.07.033 Chen, 2016, Comparison of different cooling methods for lithium ion battery cells, Appl. Therm. Eng., 94, 846, 10.1016/j.applthermaleng.2015.10.015 Yang, 2015, Assessment of the forced air-cooling performance for cylindrical lithium-ion battery packs: a comparative analysis between aligned and staggered cell arrangements, Appl. Therm. Eng., 80, 55, 10.1016/j.applthermaleng.2015.01.049 Lan, 2016, Thermal management for high power lithium-ion battery by minichannel aluminum tubes, Appl. Therm. Eng., 101, 284, 10.1016/j.applthermaleng.2016.02.070 Xu, 2017, Prevent thermal runaway of lithium-ion batteries with minichannel cooling, Appl. Therm. Eng., 110, 883, 10.1016/j.applthermaleng.2016.08.151 Bandhauer, 2011, A critical review of thermal issues in lithium-ion batteries, J. Electrochem. Soc., 158, 1, 10.1149/1.3515880 Guo, 2011, Thermal model for lithium ion battery pack with mixed parallel and series configuration, J. Power Sources, 158, 1166 Yang, 2016, Unbalanced discharging and aging due to temperature differences among the cells in a lithium-ion battery pack with parallel combination, J. Power Sources, 306, 733, 10.1016/j.jpowsour.2015.12.079 Newman, 2004 Doyle, 1993, Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell, J. Electrochem. Soc., 140, 8, 10.1149/1.2221597 Gu, 2000, Thermal-electrochemical modeling of battery systems, J. Electrochem. Soc., 147, 2910, 10.1149/1.1393625 H.H. Huang, W.L. Chung, K.C. Liao, C.F. Lee, J.Y. Tien, H.T. Young, H.Y. Chen, The state of charge of electrodes and its effects on lithium-iron-phosphate battery simulation, in: Conference of the 229th Electrochemical Society (ECS), May 29-June 2, 2016, San Diego. Kumaresan, 2006, Cycle life performance of lithium-ion pouch cells, J. Power Sources, 158, 679, 10.1016/j.jpowsour.2005.08.058 Srinivasan, 2010