Erosion–corrosion of Fe- and Ni-based alloys at 550°C

E.K. Levy, J.W. Stallings, Tube erosion in bubbling fluidized beds, in: E.J. Anthony (Ed.), Proceedings of the 11th International Conference on Fluidized Bed Combustion, ASME, New York, 1991, pp. 1139–1144. Stringer, 1995, Practical experience with wastage at elevated temperatures in coal combustion systems, Wear, 186–187, 11, 10.1016/0043-1648(95)07189-X A.J. Minchener, J. Stringer, D.M. Wilkins, E. Carls, W.M. Swift, J.S. Anderson, PFBC materials related component performance evaluation, in: J.P. Mustonen (Ed.), Proceedings of the 9th International Conference on Fluidized Bed Combustion, ASME, New York, 1987, pp. 834–845. D.B. Meadowcroft, E.D. Montrone, J.E. Oakey, J. Stott, Experiences of combating tube bank wastage in the Grimethorpe PFBC, in: Proceedings of the Institute of Energy’s 5th International Fluidized Combustion Conference, Adam Hilger, Bristol, England, 1991, pp. 105–114. Minchener, 1993, Erosion and corrosion in advanced coal fired FBC systems, J. Phys. IV, C9, 679 A. Hjörnhede, R. Norling, I. Olefjord, Erosion corrosion of coatings and steels at 550 °C, in: P. Neumann, D. Allen, E. Teuckhoff (Eds.), Proceedings of the International Conference EUROMAT’99, Wiley-VCH, Weinheim, Germany, 2000, pp. 411–416. Hoop, 1999, High temperature erosion of commercial thermally sprayed metallic and cermet coatings by solid particles, Wear, 233–235, 334, 10.1016/S0043-1648(99)00241-0 Hou, 2000, Strong HCl effect on tube wastage in a simulated bubbling fluidized bed environment, Wear, 237, 137, 10.1016/S0043-1648(99)00305-1 M. Noguchi, H. Yakuwa, M. Miyasaka, H. Sakamoto, S. Kosugi, Erosion–corrosion behavior under fluidized-bed waste incinerator conditions, in: Proceedings of the Corrosion’2000, NACE Int., Houston, TX, 2000 (paper 247). Norling, 2000, Erosion–corrosion of 304 tubes in bubbling fluidised beds at 550 °C, Mater. Sci. Forum, 369–372, 515 Wang, 2000, Erosion–corrosion behaviour of HVOF NiAl–Al2O3 intermetallic–ceramic coating, Wear, 239, 83, 10.1016/S0043-1648(00)00309-4 Higuera Hidalgo, 2001, High temperature erosion wear of flame and plasma-sprayed nickel–chromium coatings under simulated coal-fired boiler atmospheres, Wear, 247, 214, 10.1016/S0043-1648(00)00540-8 S. Hogmark, A. Hammarsten, S. Söderberg, On the combined effects of corrosion and erosion, in: J.E. Field, N.S. Corney (Eds.), Proceedings of the 6th International Conference on Erosion by Liquid and Solid Impact, Cambridge, UK, 1983 (paper 37). Kang, 1987, Mechanisms in the simultaneous erosion-oxidation attack of nickel and cobalt at high temperature, Metall. Trans. A, 18, 1785, 10.1007/BF02646210 V.K. Sethi, R.G. Corey, High temperature erosion of alloys in oxidizing environments, in: J.E. Field (Ed.), Proceedings of the 7th International Conference on Erosion by Liquid and Solid Impact, Cambridge, UK, 1987 (paper 73). G. Sundararajan, The solid particle erosion of metallic materials at elevated temperatures, in: A.V. Levy (Ed.), Proceedings of the Corrosion–Erosion–Wear of Materials at Elevated Temperatures, NACE Int., Houston, TX, 1990, pp. 11.1–11.33. Rishel, 1991, Some principal mechanisms in the simultaneous erosion and corrosion attack of metals at high temperatures, Mater. Sci. Eng. A, 143, 197, 10.1016/0921-5093(91)90739-A Stack, 1993, Review of mechanisms of erosion–corrosion of alloys at elevated temperatures, Wear, 162–164, 706, 10.1016/0043-1648(93)90070-3 Stephenson, 1993, Modelling erosive wear, Corros. Sci., 35, 1015, 10.1016/0010-938X(93)90320-G C.E. Witherell, Metallurgical characterization of wasted surfaces of in-bed carbon steel evaporator tubes, in: A.M. Manaker (Ed.), Proceedings of the 10th International Conference on Fluidized Bed Combustion, ASME, New York, 1989, pp. 937–944. A. Nafari, A. Nylund, Erosion corrosion of steel tubes in the loop seal of a biofuel fired CFB plant, in: Proceedings of the 7th Lı̀ege Conference Materials for Advanced Power Engineering, Lı̀ege, Belgium, 2002. Levy, 1986, Elevated temperature combined erosion–corrosion of steels, Wear, 110, 117, 10.1016/0043-1648(86)90142-0 Rishel, 1988, Erosion and corrosion of nickel in sulfurous atmospheres, High Temp. Sci., 27, 393 Olefjord, 1975, Application of ESCA to oxide films formed on stainless steels at intermediate and high temperatures, Met. Sci., 9, 263, 10.1179/030634575790445198 Edington, 1978, Study of particle erosion damage in Haynes Stellite 6B. Part 1. Scanning electron microscopy of eroded surfaces, Wear, 48, 131, 10.1016/0043-1648(78)90143-6 T.H. Kosel, R.O. Scattergood, A.P. Turner, An electron microscope study of erosive wear, in: K.C. Ludema, W.A. Glaeser, S.K. Rhee (Eds.), Proceedings of the International Conference on Wear of Materials, ASME, New York, 1979, pp. 192–204. Y. Hidaka, T. Anraku, N. Otsuka, Deformation of iron oxide scales upon tensile tests at 700–1280°, in: Abstract Booklet of 5th International Symposium on High-Temperature Corrosion and Protection of Materials, Les Embiez, France, 2000 (paper 4-A115). Sheldon, 1966, On the ductile behavior of nominally brittle materials during erosive cutting, J. Eng. Ind., 88B, 387, 10.1115/1.3672666 Sheldon, 1966, The mechanism of material removal in the erosive cutting of brittle materials, J. Eng. Ind., 88B, 393, 10.1115/1.3672667 Ninham, 1990, Erosion/oxidation of austenitic and ferritic alloys, Corrosion, 46, 296, 10.5006/1.3585105