Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids

Aggarwal, 2008, Optimization of multiple quality characteristics for CNC turning under cryogenic cutting environment using desirability function, Journal of Materials Processing Technology, 205, 42, 10.1016/j.jmatprotec.2007.11.105 Astakhov, 2006 Childs, 2000, Metal Machining—Theory and Applications Abukhshim, 2006, Heat generation and temperature prediction in metal cutting: a review and implications for high speed machining, International Journal of Machine Tools and Manufacture, 46, 782, 10.1016/j.ijmachtools.2005.07.024 Sun, 2010, Machining Ti–6Al–4V alloy with cryogenic compressed air cooling, International Journal of Machine Tools and Manufacture, 50, 933, 10.1016/j.ijmachtools.2010.08.003 C. Olofson, Machining of Superalloys and Refractory Metals, in, DTIC Document, 1961. Choragudi, 2010, Investigation of the machining of titanium components in lightweight vehicles, SAE International Congress Jaffery, 2008, Assessment of the machinability of Ti–6Al–4V alloy using the wear map approach, The International Journal of Advanced Manufacturing Technology, 40, 687, 10.1007/s00170-008-1393-9 Ulutan, 2011, Machining induced surface integrity in titanium and nickel alloys: a review, International Journal of Machine Tools and Manufacture, 51, 250, 10.1016/j.ijmachtools.2010.11.003 Ohkubo, 2006, Effect of surface reaction layer on grindability of cast titanium alloys, Dental Materials, 22, 268, 10.1016/j.dental.2005.04.020 Watanabe, 2000, Cutting efficiency of air-turbine burs on cast titanium and dental casting alloys, Dental Materials, 16, 420, 10.1016/S0109-5641(00)00038-5 Pittalà, 2011, A new approach to the prediction of temperature of the workpiece of face milling operations of Ti–6Al–4V, Applied Thermal Engineering, 31, 173, 10.1016/j.applthermaleng.2010.08.027 Zhang, 2009, Tool wear and cutting forces variation in high-speed end-milling Ti–6Al–4V alloy, The International Journal of Advanced Manufacturing Technology, 46, 69, 10.1007/s00170-009-2077-9 Rahman, 2003, Machinability of titanium alloys, JSME International Journal Series C, 46, 107, 10.1299/jsmec.46.107 Komanduri, 1981, New observations on the mechanism of chip formation when machining titanium alloys, Wear, 69, 179, 10.1016/0043-1648(81)90242-8 Abele, 2008, High speed milling of titanium alloys, Advances in Production Engineering & Management, 3, 1 Paul, 2006, Environmentally conscious machining and grinding with cryogenic cooling, Machining Science and Technology, 10, 87, 10.1080/10910340500534316 Dearnley, 1986, Evaluation of principal wear mechanisms of cemented carbides and ceramics used for machining titanium alloy IMI 318, Materials Science and Technology, 2, 47, 10.1179/mst.1986.2.1.47 Ezugwu, 2003, An overview of the machinability of aeroengine alloys, Journal of Materials Processing Technology, 134, 233, 10.1016/S0924-0136(02)01042-7 Ginting, 2006, Experimental and numerical studies on the performance of alloyed carbide tool in dry milling of aerospace material, International Journal of Machine Tools and Manufacture, 46, 758, 10.1016/j.ijmachtools.2005.07.035 Ezugwu, 2005, Key improvements in the machining of difficult-to-cut aerospace superalloys, International Journal of Machine Tools and Manufacture, 45, 1353, 10.1016/j.ijmachtools.2005.02.003 Donachie, 2000 Alauddin, 1996, Optimization of surface finish in end milling Inconel 718, Journal of Materials Processing Technology, 56, 54, 10.1016/0924-0136(95)01820-4 Wang, 2003, Hybrid machining of Inconel 718, International Journal of Machine Tools and Manufacture, 43, 1391, 10.1016/S0890-6955(03)00134-2 Truesdale, 2009, Microstructural analysis and machinability improvement of Udimet 720 via cryogenic milling, Machining Science and Technology, 13, 1, 10.1080/10910340902776010 Khidhir, 2011 Alauddin, 1998, Cutting forces in the end milling of Inconel 718, Journal of Materials Processing Technology, 77, 153, 10.1016/S0924-0136(97)00412-3 Miller, 1996, Advanced materials mean advanced engines, Interdisciplinary Science Reviews, 21, 117, 10.1179/isr.1996.21.2.117 Liao, 2008, Behaviors of end milling Inconel 718 superalloy by cemented carbide tools, Journal of Materials Processing Technology, 201, 460, 10.1016/j.jmatprotec.2007.11.176 Kaya, 2011, Force–torque based on-line tool wear estimation system for CNC milling of Inconel 718 using neural networks, Advances in Engineering Software, 42, 76, 10.1016/j.advengsoft.2010.12.002 Devillez, 2007, Cutting forces and wear in dry machining of Inconel 718 with coated carbide tools, Wear, 262, 931, 10.1016/j.wear.2006.10.009 Krain, 2007, Optimisation of tool life and productivity when end milling Inconel 718TM, Journal of Materials Processing Technology, 189, 153, 10.1016/j.jmatprotec.2007.01.017 Sharman, 2001, Tool life when high speed ball nose end milling Inconel 718 (TM), Journal of Materials Processing Technology, 118, 29, 10.1016/S0924-0136(01)00855-X Dudzinski, 2004, A review of developments towards dry and high speed machining of Inconel 718 alloy, International Journal of Machine Tools and Manufacture, 44, 439, 10.1016/S0890-6955(03)00159-7 Leshock, 2001, Plasma enhanced machining of Inconel 718: modeling of workpiece temperature with plasma heating and experimental results, International Journal of Machine Tools and Manufacture, 41, 877, 10.1016/S0890-6955(00)00106-1 Machado, 1998, Tool performance and chip control when machining Ti–6A1–4V and Inconel 901 using high pressure coolant supply, Machining Science and Technology, 2, 1, 10.1080/10940349808945655 Hong, 1999, Improving low carbon steel chip breakability by cryogenic chip cooling, International Journal of Machine Tools and Manufacture, 39, 1065, 10.1016/S0890-6955(98)00074-1 Nalbant, 2011, Effect of cryogenic cooling in milling process of AISI 304 stainless steel, Transactions of Nonferrous Metals Society of China, 21, 72, 10.1016/S1003-6326(11)60680-8 Endrino, 2006, Hard AlTiN, AlCrN PVD coatings for machining of austenitic stainless steel, Surface and Coatings Technology, 200, 6840, 10.1016/j.surfcoat.2005.10.030 Korkut, 2004, Determination of optimum cutting parameters during machining of AISI 304 austenitic stainless steel, Materials & Design, 25, 303, 10.1016/j.matdes.2003.10.011 Fernández-Abia, 2011, Effect of very high cutting speeds on shearing, cutting forces and roughness in dry turning of austenitic stainless steels, The International Journal of Advanced Manufacturing Technology, 1 Paro, 2001, Tool wear and machinability of HIPed P/M and conventional cast duplex stainless steels, Wear, 249, 279, 10.1016/S0043-1648(01)00570-1 Dolinšek, 2003, Work-hardening in the drilling of austenitic stainless steels, Journal of Materials Processing Technology, 133, 63, 10.1016/S0924-0136(02)00245-5 Thiele, 1999, Effect of cutting edge geometry and workpiece hardness on surface generation in the finish hard turning of AISI 52100 steel, Journal of Materials Processing Technology, 94, 216, 10.1016/S0924-0136(99)00111-9 Rech, 2003, Surface integrity in finish hard turning of case-hardened steels, International Journal of Machine Tools and Manufacture, 43, 543, 10.1016/S0890-6955(02)00141-4 Dogra, 2010, Tool wear, chip formation and workpiece surface issues in CBN hard turning: a review, International Journal of Precision Engineering and Manufacturing, 11, 341, 10.1007/s12541-010-0040-1 Grzesik, 2008, Wear phenomenon in the hard steel machining using ceramic tools, Tribology International, 41, 802, 10.1016/j.triboint.2008.02.003 Ghosh, 2003 Jia, 2010, Experimental investigations into near-dry milling EDM of Stellite alloys, International Journal of Machining and Machinability of Materials, 7, 96, 10.1504/IJMMM.2010.029848 Tsao, 2004, Taguchi analysis of delamination associated with various drill bits in drilling of composite material, International Journal of Machine Tools and Manufacture, 44, 1085, 10.1016/j.ijmachtools.2004.02.019 Koplev, 1983, The cutting process, chips, and cutting forces in machining CFRP, Composites, 14, 371, 10.1016/0010-4361(83)90157-X Bhattacharyya, 1998, A study of hole drilling in Kevlar composites, Composites Science and Technology, 58, 267, 10.1016/S0266-3538(97)00127-9 Lin, 2001, Machining and fluidity of 356Al/SiC (p) composites, Journal of Materials Processing Technology, 110, 152, 10.1016/S0924-0136(00)00857-8 Davim, 2002, Diamond tool performance in machining metal–matrix composites, Journal of Materials Processing Technology, 128, 100, 10.1016/S0924-0136(02)00431-4 El-Gallab, 1998, Machining of Al/SiC particulate metal–matrix composites: Part I: Tool performance, Journal of Materials Processing Technology, 83, 151, 10.1016/S0924-0136(98)00054-5 Wang, 1996, Cryogenic PCBN turning of ceramic (Si3N4), Wear, 195, 1, 10.1016/0043-1648(95)06645-4 Shih, 2004, End milling of elastomers—fixture design and tool effectiveness for material removal, Journal of Manufacturing Science and Engineering, 126, 115, 10.1115/1.1616951 Shih, 2004, Chip morphology and forces in end milling of elastomers, Journal of Manufacturing Science and Engineering, 126, 124, 10.1115/1.1633276 Mishima, 2010, Pre-deformation-assisted cryogenic micromachining for fabrication of three-dimensional unique micro channels, Journal of Advanced Mechanical Design, Systems, and Manufacturing, 4, 936, 10.1299/jamdsm.4.936 Kakinuma, 2008, Micromachining of soft polymer material applying cryogenic cooling, Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2, 560, 10.1299/jamdsm.2.560 V. Dhokia, S. Newman, P. Crabtree, M. Ansell, Adiabatic shear band formation as a result of cryogenic CNC machining of elastomers, in: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 225, 2011, pp. 1482–1492. Chen, 2000, Sliding wear map for the magnesium alloy Mg–9Al–0.9Zn (AZ91), Wear, 246, 106, 10.1016/S0043-1648(00)00495-6 Froes, 1998, The science, technology, and applications of magnesium, JOM Journal of the Minerals, Metals and Materials Society, 50, 30, 10.1007/s11837-998-0411-6 Denkena, 2005 Witte, 2005, In vivo corrosion of four magnesium alloys and the associated bone response, Biomaterials, 26, 3557, 10.1016/j.biomaterials.2004.09.049 Staiger, 2006, Magnesium and its alloys as orthopedic biomaterials: a review, Biomaterials, 27, 1728, 10.1016/j.biomaterials.2005.10.003 Gariboldi, 2003, Drilling a magnesium alloy using PVD coated twist drills, Journal of Materials Processing Technology, 134, 287, 10.1016/S0924-0136(02)01111-1 Weinert, 2004, Dry machining and minimum quantity lubrication, CIRP Annals—Manufacturing Technology, 53, 511, 10.1016/S0007-8506(07)60027-4 Polmear, 1994, Magnesium alloys and applications, Materials Science and Technology, 10, 1, 10.1179/mst.1994.10.1.1 Song, 2010, Mirror finishing of Co–Cr–Mo alloy using elliptical vibration cutting, Precision Engineering, 34, 784, 10.1016/j.precisioneng.2010.02.003 Bagci, 2006, A study of Taguchi optimization method for identifying optimum surface roughness in CNC face milling of cobalt-based alloy (Stellite 6), The International Journal of Advanced Manufacturing Technology, 29, 940, 10.1007/s00170-005-2616-y Ohmori, 2006, Investigation on grinding characteristics and surface-modifying effects of biocompatible Co–Cr alloy, CIRP Annals—Manufacturing Technology, 55, 597, 10.1016/S0007-8506(07)60491-0 Aykut, 2007, Modeling of cutting forces as function of cutting parameters for face milling of satellite 6 using an artificial neural network, Journal of Materials Processing Technology, 190, 199, 10.1016/j.jmatprotec.2007.02.045 Kalyankumar, 2008, Investigation of tool wear and cutting force in cryogenic machining using design of experiments, Journal of Materials Processing Technology, 203, 95, 10.1016/j.jmatprotec.2007.10.036 C. Evans, D.B. Marshall, Wear mechanisms in ceramics, in: Z.Y. Wang, K.P. Rajurkar, M. Murugappan, (Eds.) (1996), Cryogenic PCBN turning of ceramic (Si3N4), Wear, vol. 195, 1980, pp. 1–6. Sreejith, 2000, Dry machining: machining of the future, Journal of Materials Processing Technology, 101, 287, 10.1016/S0924-0136(00)00445-3 Hong, 2001, New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti–6Al–4V, International Journal of Machine Tools and Manufacture, 41, 2245, 10.1016/S0890-6955(01)00041-4 Kustas, 1997, Nanocoatings on cutting tools for dry machining, CIRP Annals—Manufacturing Technology, 46, 39, 10.1016/S0007-8506(07)60771-9 López de Lacalle, 2000, Using high pressure coolant in the drilling and turning of low machinability alloys, The International Journal of Advanced Manufacturing Technology, 16, 85, 10.1007/s001700050012 Sarma, 2007, A comparison of dry and air-cooled turning of grey cast iron with mixed oxide ceramic tool, Journal of Materials Processing Technology, 190, 160, 10.1016/j.jmatprotec.2007.02.049 Jayal, 2010, Sustainable manufacturing: modeling and optimization challenges at the product, process and system levels, CIRP Journal of Manufacturing Science and Technology, 2, 144, 10.1016/j.cirpj.2010.03.006 Jianxin, 2005, Self-lubricating behaviors of AlO/TiB ceramic tools in dry high-speed machining of hardened steel, Journal of the European Ceramic Society, 25, 1073, 10.1016/j.jeurceramsoc.2004.03.033 Ezugwu, 2005, The effect of argon-enriched environment in high-speed machining of Titanium alloy, Tribology Transactions, 48, 18, 10.1080/05698190590890290 Wang, 2005, High-speed milling of titanium alloys using binderless CBN tools, International Journal of Machine Tools and Manufacture, 45, 105, 10.1016/j.ijmachtools.2004.06.021 Liu, 2002, Machinability of pearlitic cast iron with cubic boron nitride (CBN) cutting tools, Journal of Manufacturing Science and Engineering, 124, 820, 10.1115/1.1511522 Abele, 2008, Using PCD for machining CGI with a CO2 coolant system, Production Engineering, 2, 165, 10.1007/s11740-008-0104-6 Evans, 1991, Cryogenic diamond turning of stainless steel, CIRP Annals—Manufacturing Technology, 40, 571, 10.1016/S0007-8506(07)62056-3 Nabhani, 2001, Machining of aerospace titanium alloys, Robotics and Computer-Integrated Manufacturing, 17, 99, 10.1016/S0736-5845(00)00042-9 Shaw, 1986 El Baradie, 1996, Cutting fluids: Part I. Characterisation, Journal of Materials Processing Technology, 56, 786, 10.1016/0924-0136(95)01892-1 Oberg, 2004 Trent, 2000 Grzesik, 2008 Brandao, 2008, Experimental and theoretical study of workpiece temperature when end milling hardened steels using (TiAl)N-coated and PcBN-tipped tools, Journal of Materials Processing Technology, 199, 234, 10.1016/j.jmatprotec.2007.07.049 Gisip, 2009, Effects of cryogenic treatment and refrigerated air on tool wear when machining medium density fiberboard, Journal of Materials Processing Technology, 209, 5117, 10.1016/j.jmatprotec.2009.02.010 Hong, 2006, Lubrication mechanisms of LN2 in ecological cryogenic machining, Machining Science and Technology, 10, 133, 10.1080/10910340500534324 Dhananchezian, 2011, Cryogenic turning of the Ti–6Al–4V alloy with modified cutting tool inserts, Cryogenics, 51, 34, 10.1016/j.cryogenics.2010.10.011 López de Lacalle, 2006, Experimental and numerical investigation of the effect of spray cutting fluids in high speed milling, Journal of Materials Processing Technology, 172, 11, 10.1016/j.jmatprotec.2005.08.014 S.C. Feng, M. Hattori, Cost and process information modeling for dry machining, in: Proceedings of the International Workshop on Environment and Manufacturing, National Institute of Standards and Technology, 2000. Klocke, 1997, Dry cutting, CIRP Annals—Manufacturing Technology, 46, 519, 10.1016/S0007-8506(07)60877-4 Byrne, 1993, Environmentally clean machining processes—a strategic approach, CIRP Annals—Manufacturing Technology, 42, 471, 10.1016/S0007-8506(07)62488-3 Pusavec, 2010, Transitioning to sustainable production—part II: evaluation of sustainable machining technologies, Journal of Cleaner Production, 18, 1211, 10.1016/j.jclepro.2010.01.015 Hong, 1999, Thermal aspects, material considerations and cooling strategies in cryogenic machining, Clean Technologies and Environmental Policy, 1, 107, 10.1007/s100980050016 2011, COSHH essentials for machining with metalworking fluids [online], Health and Safety Executive. Available: 〈http://www.hse.gov.uk/metalworking/ecoshh.htm〉 (Accessed 01-11 2011). Hong, 2000, Economical and ecological cryogenic machining of AISI 304 austenitic stainless steel, Clean Technologies and Environmental Policy, 2, 157 Karadzic, 2004, Purification and characterization of a protease from Pseudomonas aeruginosa grown in cutting oil, Journal of Bioscience and Bioengineering, 98, 145, 10.1016/S1389-1723(04)00258-0 Mattsby-Baltzer, 1989, Microbial growth and accumulation in industrial metal-working fluids, Applied and Environmental Microbiology, 55, 2681, 10.1128/AEM.55.10.2681-2689.1989 C. Peter, C. Steven, L. David, Evaporation of Polydisperse Multi Component Oil Droplets, In: N.R. Dhar, et al., (Eds.), Wear behaviour of uncoated carbide insertsunder dry, wet and cryogenic cooling conditions in turning C60 steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2006, vol. 28, 1996, pp. 146–152. Sutherland, 2000, An experimental investigation of air quality in wet and dry turning, CIRP Annals—Manufacturing Technology, 49, 61, 10.1016/S0007-8506(07)62896-0 Koh, 1998, Occupational dermatology, Clinics in Dermatology, 16, 113, 10.1016/S0738-081X(97)00175-2 Kopac, 2009, Achievements of sustainable manufacturing by machining, Manufacturing Engineering, 34, 180 Kim, 2001, Evaluation of machinability by cutting environments in high-speed milling of difficult-to-cut materials, Journal of Materials Processing Technology, 111, 256, 10.1016/S0924-0136(01)00529-5 Hong, 2001, Friction and cutting forces in cryogenic machining of Ti–6Al–4V, International Journal of Machine Tools and Manufacture, 41, 2271, 10.1016/S0890-6955(01)00029-3 Hong, 2001, Economical and ecological cryogenic machining, Journal of Manufacturing Science and Engineering, 123, 331, 10.1115/1.1315297 Rivero, 2006, An experimental investigation of the effect of coatings and cutting parameters on the dry drilling performance of aluminium alloys, The International Journal of Advanced Manufacturing Technology, 28, 1, 10.1007/s00170-004-2349-3 Stewart, 2004, Cryogenic treatment of tungsten carbide reduces tool wear when machining medium density fiberboard, Forest Products Journal, 54, 53 Yong, 2006, Performance of cryogenically treated tungsten carbide tools in milling operations, The International Journal of Advanced Manufacturing Technology, 32, 638, 10.1007/s00170-005-0379-0 Koneshlou, 2011, Effect of cryogenic treatment on microstructure, mechanical and wear behaviors of AISI H13 hot work tool steel, Cryogenics, 51, 55, 10.1016/j.cryogenics.2010.11.001 Li, 2010, Hardness and toughness investigations of deep cryogenic treated cold work die steel, Cryogenics, 50, 89, 10.1016/j.cryogenics.2009.12.005 Sreeramareddy, 2009, Machinability of C45 steel with deep cryogenic treated tungsten carbide cutting tool inserts, International Journal of Refractory Metals and Hard Materials, 27, 181, 10.1016/j.ijrmhm.2008.04.007 Dasilva, 2006, Performance of cryogenically treated HSS tools, Wear, 261, 674, 10.1016/j.wear.2006.01.017 Noorul Haq, 2005, Investigation of the effects of cooling in hard turning operations, The International Journal of Advanced Manufacturing Technology, 30, 808, 10.1007/s00170-005-0128-4 Jen, 2002, Investigation of heat pipe cooling in drilling applications: part I: preliminary numerical analysis and verification, International Journal of Machine Tools and Manufacture, 42, 643, 10.1016/S0890-6955(01)00155-9 Rozzi, 2011, The Experimental and Theoretical Evaluation of an Indirect Cooling System for Machining, Journal of Heat Transfer, 133, 031006, 10.1115/1.4002446 Uehara, 1968, Chip formation, surface roughness and cutting force in cryogenic machining, Annals of CIRP, 17, 409 Uehara, 1970, Characteristics of tool wear in cryogenic machining, Annals of CIRP, 18, 273 Tsai, 1998, Investigation of the transient thermal deflection and stresses of the workpiece in surface grinding with the application of a cryogenic magnetic chuck, Journal of Materials Processing Technology, 79, 177, 10.1016/S0924-0136(98)00008-9 Dhar, 2006, The influence of minimum quantity of lubrication (MQL) on cutting temperature, chip and dimensional accuracy in turning AISI-1040 steel, Journal of Materials Processing Technology, 171, 93, 10.1016/j.jmatprotec.2005.06.047 F. Klocke, D. Lung, G. Eisenblätter, P. Müller-Hummel, H. Pröll, W. Rehbein, Minimalmengenkühlschmierung-systeme werkzeuge und medien, (1998), In: K. Weinert, I. Inasaki, J.W. Sutherland, T. Wakabayashi, (Eds.), Dry machining and minimum lubrication, Cirp Annals—Manufacturing Technology, vol. 53, 2004. Sharma, 2009, Cooling techniques for improved productivity in turning, International Journal of Machine Tools and Manufacture, 49, 435, 10.1016/j.ijmachtools.2008.12.010 Sales, 2009, Tribological behaviour when face milling AISI 4140 steel with minimum quantity fluid application, Industrial Lubrication and Tribology, 61, 84, 10.1108/00368790910940400 UNIST. 2012. UNIST, Inc., Official Website (Online). Available: 〈http://www.unist.com/aboutus.htm〉 (Accessed 5 January 2012). Kamata, 2007, High speed MQL finish-turning of Inconel 718 with different coated tools, Journal of Materials Processing Technology, 192–193, 281, 10.1016/j.jmatprotec.2007.04.052 Yuan, 2011, Effects of cooling air temperature on cryogenic machining of Ti–6Al–4V alloy, Journal of Materials Processing Technology, 211, 356, 10.1016/j.jmatprotec.2010.10.009 Li, 2006, Modeling of cutting temperature in near dry machining, Journal of Manufacturing Science and Engineering, 128, 416, 10.1115/1.2162907 Li, 2007, Modeling of cutting forces in near dry machining under tool wear effect, International Journal of Machine Tools and Manufacture, 47, 1292, 10.1016/j.ijmachtools.2006.08.017 Su, 2007, Refrigerated cooling air cutting of difficult-to-cut materials, International Journal of Machine Tools and Manufacture, 47, 927, 10.1016/j.ijmachtools.2006.07.005 Timmerhaus, 2007 Yalcin, 2009, The effects of various cooling strategies on surface roughness and tool wear during soft materials milling, Materials & Design, 30, 896, 10.1016/j.matdes.2008.05.037 De Chiffre, 2007, Performance testing of cryogenic CO2 as cutting fluid in parting/grooving and threading austenitic stainless steel, CIRP Annals—Manufacturing Technology, 56, 101, 10.1016/j.cirp.2007.05.026 Zhao, 1992, Cooling strategies for cryogenic machining from a materials viewpoint, Journal of Materials Engineering and Performance, 1, 669, 10.1007/BF02649248 Hong, 2001, Cooling approaches and cutting temperatures in cryogenic machining of Ti–6Al–4V, International Journal of Machine Tools and Manufacture, 41, 1417, 10.1016/S0890-6955(01)00026-8 Bermingham, 2011, New observations on tool life, cutting forces and chip morphology in cryogenic machining Ti–6Al–4V, International Journal of Machine Tools and Manufacture, 51, 500, 10.1016/j.ijmachtools.2011.02.009 M. Bermingham, S. Palanisamy, D. Kent, M. Dargusch, A comparison of cryogenic and high pressure emulsion cooling technologies on tool life and chip morphology in Ti–6Al–4V cutting, Journal of Materials Processing Technology, (2011). Wang, 2000, Cryogenic machining of hard-to-cut materials, Wear, 239, 168, 10.1016/S0043-1648(99)00361-0 Ke, 2009, Use of nitrogen gas in high-speed milling of Ti–6Al–4V, Transactions of Nonferrous Metals Society of China, 19, 530, 10.1016/S1003-6326(08)60307-6 Venugopal, 2007, Tool wear in cryogenic turning of Ti–6Al–4V alloy, Cryogenics, 47, 12, 10.1016/j.cryogenics.2006.08.011 Pusavec, 2009, Achieving and implementation of sustainability principles in machining processes, Journal of Advances in Production Engineering and Management, 3 Ding, 2002, Experimental evaluation of friction coefficient and liquid nitrogen lubrication effect in cryogenic machining, Machining Science and Technology, 6, 235, 10.1081/MST-120005958 Unknown. 2011. New Titanium Machining Process Supports Affordability Of Lockheed Martin F-35 (Online). Available: 〈http://www.lockheedmartin.com/news/press_releases/2011/110915ae_f35_newtitanium.html〉 (Accessed 6 January 2012). Liu, 2007, On temperatures and tool wear in machining hypereutectic Al–Si alloys with vortex-tube cooling, International Journal of Machine Tools and Manufacture, 47, 635, 10.1016/j.ijmachtools.2006.04.008 Su, 2006, An experimental investigation of effects of cooling/lubrication conditions on tool wear in high-speed end milling of Ti–6Al–4V, Wear, 261, 760, 10.1016/j.wear.2006.01.013 Rahman, 2003, Effect of chilled air on machining performance in end milling, The International Journal of Advanced Manufacturing Technology, 21, 787, 10.1007/s00170-002-1394-z Hong, 2001, Micro-temperature manipulation in cryogenic machining of low carbon steel, Journal of Materials Processing Technology, 116, 22, 10.1016/S0924-0136(01)00836-6