Laboratory evaluation of rejuvenation effect of reactive rejuvenator on aged SBS modified bitumen
Tóm tắt
A reactive rejuvenator (RR) containing epoxy functional groups and a conventional rejuvenator (CR) were used to regenerate the aged SBS modified bitumen (SBSMB). Effects of two kinds of rejuvenators on physical properties, rheological properties, chemical structure and phase morphology of the aged SBSMB were investigated. Compared with CR, RR performs better in recovering the physical and rheological properties of aged SBSMB, especially for ductility, 9 wt% RR could recover the ductility of aged SBSMB to a level which is close to virgin SBSMB, and the RR shows more effective regeneration effect in the repeated aging and regeneration. FTIR and phase morphology analysis indicates that epoxy functional groups in RR could react with carboxylic groups formed in the degradation of SBS and generate carboxylic ester group, which could bond those oxygenated chain fragments of SBS, enhance the interaction among the SBS chains and partially offset the degradation of SBS chains and the swelling and dilution effects of oily compositions on SBS, resulting in good restoration of the network structure of SBS and the ductility of SBSMB.
Tài liệu tham khảo
Mouillet V, Farcas F, Besson S (2008) Ageing by UV radiation of an elastomer modified bitumen. Fuel 87:2408–2419
Feng ZG, Bian HJ, Li XJ, Yu JY (2016) FTIR analysis of UV aging on bitumen and its fractions. Mater Struct 49:1381–1389
Lu XH, Isacsson U (1997) Influence of styrene–butadiene–styrene polymer modification on bitumen viscosity. Fuel 76:1353–1359
Naskar M, Reddy KS, Chaki TK, Divya MK, Deshpande AP (2013) Effect of ageing on different modified bituminous binders: comparison between RTFOT and radiation ageing. Mater Struct 46:1227–1241
Xiao FP, Amirkhanian S, Wang HN, Hao PW (2014) Rheological property investigations for polymer and polyphosphoric acid modified asphalt binders at high temperatures. Constr Build Mater 64:316–323
Sengoz B, Isikyakar G (2008) Analysis of styrene–butadiene–styrene polymer modified bitumen using fluorescent microscopy and conventional test methods. J Hazard Mater 15:424–432
Pérez-Lepe A, Martínez-Boza FJ, Gallegos C, González O, Muñoz ME, Santamaría A (2003) Influence of the processing conditions on the rheological behaviour of polymer-modified bitumen. Fuel 82:1339–1348
Ahmedzade P (2013) The investigation and comparison effects of SBS and SBS with new reactive terpolymer on the rheological properties of bitumen. Constr Build Mater 38:285–291
Lu XH, Isacsson U (1998) Chemical and rheological evaluation of ageing properties of SBS polymer modified bitumens. Fuel 77:961–972
Ouyang CF, Wang SF, Zhang Y, Zhang YX (2006) Improving the aging resistance of styrene–butadiene–styrene tri-block copolymer modified asphalt by addition of antioxidants. Polym Degrad Stab 91:795–804
Wu SP, Pang L, Mo LT, Chen YC, Zhu GJ (2009) Influence of aging on the evolution of structure, morphology and rheology of base and SBS modified bitumen. Constr Build Mater 23:1005–1010
Sugano M, Kajita J, Ochiai M, Takagi N, Iwai S, Hirano K (2011) Mechanisms for chemical reactivity of two kinds of polymer modified asphalts during thermal degradation. Chem Eng J 176–177:231–236
Wasiuddin NM, Fogle CM, Zaman MM, O’Rear EA (2007) Characterization of thermal degradation of liquid amine anti-strip additives in asphalt binders due to RTFO and PAV-aging. J Test Eval 35:1–8
Cortizo MS, Larsen DO, Bianchetto H, Alessandrini JL (2004) Effect of the thermal degradation of SBS copolymers during the ageing of modified asphalts. Polym Degrad Stab 86:275–282
Charrié-Duhaut A, Lemoine S, Adam P, Connan J, Albrecht P (2000) Abiotic oxidation of petroleum bitumens under natural conditions. Org Geochem 31:977–1003
Lu XH, Isacsson U (2002) Effect of ageing on bitumen chemistry and rheology. Constr Build Mater 16:15–22
Mohammad LN, Cooper SB, Elseifi MA (2011) Characterization of HMA mixtures containing high reclaimed asphalt pavement content with crumb rubber additives. J Mater Civ Eng 23:1560–1568
Xiao FP, Putman B, Amirkhanian S (2015) Rheological characteristics investigation of high percentage RAP binders with WMA technology at various aging states. Constr Build Mater 98:315–324
Xiao FP, Amirkhanian SN (2010) Laboratory investigation of utilizing high percentage of rap in rubberized asphalt mixture. Mater Struct 43:223–233
Lin PS, Wu TL, Chang CW, Chou BY (2011) Effects of recycling agents on aged asphalt binders and reclaimed asphalt concrete. Mater Struct 44:911–921
Shen JN, Amirkhanian S, Miller JA (2007) Effects of rejuvenating agents on superpave mixtures containing reclaimed asphalt pavement. J Mater Civil Eng 19:376–384
Ekblad J, Lundström R (2017) Soft bitumen asphalt produced using RAP. Mater Struct. doi:10.1617/s11527-016-0871-z
García Á, Schlangen E, Ven M, Sierra-Beltrán G (2010) Preparation of capsules containing rejuvenators for their use in asphalt concrete. J Hazard Mater 184:603–611
Zhang J, Wang JL, Wu YQ, Wang YP, Wang YP (2009) Evaluation of the improved properties of SBR/weathered coal modified bitumen containing carbon black. Constr Build Mater 23:2678–2687
Mouillet V, Lamontagne J, Durrieu F, Planche JP, Lapalu L (2008) Infrared microscopy investigation of oxidation and phase evolution in bitumen modified with polymers. Fuel 87:1270–1280
Feng ZG, Xu S, Sun YB, Yu JY (2012) Performance evaluation of SBS modified asphalt with different anti-aging additives. J Test Eval 40:728–733
Feng ZG, Yu JY, Wu SP (2012) Rheological evaluation of bitumen containing different ultraviolet absorbers. Constr Build Mater 29:591–596
Airey GD (2002) Rheological evaluation of ethylene vinyl acetate polymer modified bitumens. Constr Build Mater 16:473–487
Petersen JC, Robertson RE, Branthaver JF, Harnsberger PM, Duvall JJ, Kim SS et al (1994) Binder characterization and evaluation, Test methods, vol. 4. Strategic highway research program, SHRP-A-370. National Research Council, Washington
Yu JY, Feng PC, Zhang HL, Wu SP (2009) Effect of organo-montmorillonite on aging properties of asphalt. Constr Build Mater 23:2636–2640
Lu XH, Isacsson U, Ekblad J (1999) Phase separation of SBS polymer modified bitumens. J Mater Civ Eng 11:51–57
Sengoz B, Isikyakar G (2008) Evaluation of the properties and microstructure of SBS and EVA polymer modified bitumen. Constr Build Mater 22:1897–1905
Topal A (2010) Evaluation of the properties and microstructure of plastomeric polymer modified bitumens. Fuel Process Technol 91:45–51