Precision surface characterization for finish cylindrical milling with dynamic tool displacements model

Baek, 1997, A dynamic surface roughness model for face milling, Precis. Eng., 20, 171, 10.1016/S0141-6359(97)00043-3 Baek, 2001, Optimization of feedrate in a face milling operation using a surface roughness model, Int. J. Mach. Tools Manuf., 41, 451, 10.1016/S0890-6955(00)00039-0 Buj- Corral, 2011, Influence of feed, eccentricity and helix angle on topography obtained in side, milling processes, Int. J. Mach. Tools Manuf., 51, 889, 10.1016/j.ijmachtools.2011.08.001 Franco, 2008, A study of back cutting surface finish from tool errors and machine tool deviations during face milling, Int. J. Mach. Tools Manuf., 48, 112, 10.1016/j.ijmachtools.2007.07.001 Jayaram, 2001, Estimation of the specific cutting pressures for mechanistic cutting force models, Int. J. Mach. Tools Manuf., 41, 265, 10.1016/S0890-6955(00)00076-6 Jozwik, 2015, Diagnostics of workpiece surface condition based on cutting tool vibrations during machining, Adv. Sci. Technol. Res. J., 9, 57, 10.12913/22998624/2365 Kumar, 2016, Wear characteristics and defects analysis of friction stir welded joint of aluminium alloy 6061-T6, Eksploatacja i Niezawodnosc—Maint. Reliab., 18, 128, 10.17531/ein.2016.1.17 Li, 2002, Study on an end milling generation surface model and simulation taking into account of the main axle’s tolerance, J. Mater. Process. Technol., 129, 86, 10.1016/S0924-0136(02)00581-2 Liu, 2005, Modelling the machining dynamics of peripheral milling, Int. J. Mach. Tools Manuf., 45, 1301, 10.1016/j.ijmachtools.2005.01.019 Miyaguchi, 2001, Effect of tool stiffness upon tool wear in high spindle speed milling using small ball end mill, Precis. Eng., 25, 145, 10.1016/S0141-6359(01)00067-8 Peigne, 2004, Impact of the cutting dynamics of small radial immersion milling operations on machined surface roughness, Int. J. Mach. Tools Manuf., 44, 1133, 10.1016/j.ijmachtools.2004.04.012 Ruggiero, 2015, Experimental analysis of tribological behavior of UHMWPE against AISI420C and against TiAl6V4 alloy under dry and lubricated conditions, Tribol. Int., 92, 154, 10.1016/j.triboint.2015.06.005 Ruggiero, 2016, Experimental comparison on tribological pairs UHMWPE/TIAL6V4 alloy, UHMWPE/AISI316L austenitic stainless and UHMWPE/AL2O3 ceramic, under dry and lubricated conditions, Tribol. Int., 96, 349, 10.1016/j.triboint.2015.12.041 Rusinek, 2015, Orthogonal cutting process modelling considering tool-workpiece frictional effect, Procedia CIRP, 31, 429, 10.1016/j.procir.2015.03.033 Schmitz, 2007, Runout effects in milling: surface finish, surface location error, and stability, Int. J. Mach. Tools Manuf., 47, 841, 10.1016/j.ijmachtools.2006.06.014 Tatar, 2008, Measurement of milling tool vibrations during cutting using laser vibrometry, Int. J. Mach. Tools Manuf., 48, 380, 10.1016/j.ijmachtools.2007.09.009 Twardowski, 2011, Surface roughness analysis of hardened steel after high-speed milling, Scanning, 33, 386, 10.1002/sca.20274 Ulutan, 2013, Determination of tool friction in presence of flank wear and stress distribution based validation using finite element simulations in machining of titanium and nickel based alloys, J. Mater. Process. Technol., 213, 2217, 10.1016/j.jmatprotec.2013.05.019 Urbanski, 2000, High speed machining of moulds and dies for net shape manufacture, Mater. Des., 21, 395, 10.1016/S0261-3069(99)00092-8 Wojciechowski, 2015, Modeling of cutter displacements during ball end milling of inclined surfaces, Arch. Civil Mech. Eng., 15, 798, 10.1016/j.acme.2015.06.008 Wojciechowski, 2011, Machined surface roughness including cutter displacements in milling of hardened steel, Metrol. Meas. Syst., XVIII, 429 Wojciechowski, 2015, The estimation of cutting forces and specific force coefficients during finishing ball end milling of inclined surfaces, Int. J. Mach. Tools Manuf., 89, 110, 10.1016/j.ijmachtools.2014.10.006 Zhenyu, 2015, Influence of dynamic effects on surface roughness for face milling proces, Int. J. Adv. Manuf. Technol., 80, 1823, 10.1007/s00170-015-7127-x