Coatings tribology—contact mechanisms and surface design

Holmberg, K. and Matthews, A., Coatings Tribology—Properties, Techniques and Applications in Surface Engineering (Elsevier Tribology Series, Vol. 28). Elsevier Science B.V., The Netherlands, 1994, 442 pp. Bhushan, B. (Ed.), Handbook of Micro/Nanotribology. CRC Press, Boca Raton, FL, 1995. Matthews, A., Holmberg, K. and Franklin, S., A methodology for coating selection. In Thin Films in Tribology (Proceedings of 19th Leeds–Lyon Symposium on Tribology, Leeds, UK, 8–11 September 1992), ed. D. Dowson et al. (Elsevier Tribology Series, Vol. 25). Elsevier, Amsterdam, 1993, pp. 429–439. Franklin, 1995, The implementation of tribological principles in an expert-system (`PERCEPT') for the selection of metallic materials, surface treatments and coatings in engineering design, Wear, 181, 183, 1 Ramalingam, 1995, Film–substrate interface stresses and their role in the tribological performance of surface coatings, Tribology International, 28, 145, 10.1016/0301-679X(95)98963-E Gunnars, 1996, Thermal stresses in diamond coatings and their influence on coating wear and failure, Surface and Coatings Technolology, 80, 303, 10.1016/0257-8972(95)02436-0 Gålin, 1996, The effects of compressive stresses on the abrasion of diamond coatings, Wear, 196, 226, 10.1016/0043-1648(95)06907-0 Diao, 1994, The maximum tensile stress on a hard coating under sliding friction, Tribology International, 27, 267, 10.1016/0301-679X(94)90006-X Wong, 1996, Effect of hard and stiff overlay coatings on the strength of surfaces in repeated sliding, Tribology International, 29, 695, 10.1016/0301-679X(96)00015-1 Diao, 1994, Interface yield map of a hard coating under sliding contact, Thin Solid Films, 245, 115, 10.1016/0040-6090(94)90886-9 Diao, 1994, Spalling mechanism of Al2O3 ceramic coating coated WC–Co substrate under sliding contact, Thin Solid Films, 245, 104, 10.1016/0040-6090(94)90884-2 Diao, 1994, Fracture mechanics of ceramic coatings in indentation, Transactions of ASME, Journal of Tribology, 116, 860, 10.1115/1.2927346 Eberhardt, 1994, Surface cracks in layered Hertzian contact with friction, Tribology Transactions, 38, 299, 10.1080/10402009508983408 Sainsot, P., Leroy, J. M. and Villechaise, B., Effect of surface coatings in a rough normally loaded contact. In Mechanics of Coatings (Elsevier Tribology Series, Vol. 17), ed. D. Dowson et al. Elsevier, Amsterdam, 1990, pp. 151–156. Mao, 1994, Contact mechanisms of engineering surfaces: state of the art, Surface Engineering, 10, 297, 10.1179/sur.1994.10.4.297 Mao, 1995, A numerical model for the dry sliding contact of layered elastic bodies with rough surfaces, Tribology Transactions, 39, 416, 10.1080/10402009608983547 Varadi, 1995, The effect of surface roughness on contact and stress states of spur gears, Tribotest Journal, 2, 25, 10.1002/tt.3020020104 Homberg, 1992, A concept for friction mechanisms of coated surfaces, Surface and Coatings Technology, 56, 1, 10.1016/0257-8972(92)90189-H Holmberg, K., Matthews, A. and Ronkainen, H., Wear mechanisms of coated sliding surfaces. In Thin Films in Tribology (Proceedings of 19th Leeds–Lyon Symposium on Tribology, Leeds, UK, 8–11 September 1992), ed. D. Dowson et al. (Elsevier Tribology Series, Vol. 25). Elsevier, Amsterdam, 1993, pp. 399–407. Suh, N. P., Tribophysics. Prentice-Hall, Englewood Cliffs, NJ, 1986, 489 pp. Donnet, 1995, Tribology of solid lubricant coatings, Condensed Matter News, 4, 9 Bowden, F. P. and Tabor, D., Friction and Lubrication of Solids. Claredon Press, Oxford, 1950, 374 pp. Spalvins, 1994, Frictional behavior and adhesion of Ag and Au films applied to aluminium oxide by oxygen-ion assisted screen cage ion plating, Surface and Coatings Technology, 68, 69, 482, 10.1016/0257-8972(94)90205-4 Voevodin, 1995, Mechanical and tribological properties of diamond-like carbon coatings prepared by pulsed laser deposition, Surface and Coatings Technology, 76, 77, 534, 10.1016/0257-8972(95)02521-9 Voevodin, 1996, Multilayer composite ceramic–metal–DLC coatings for sliding wear applications, Tribology International, 29, 559, 10.1016/0301-679X(95)00121-J Erdemir, 1996, Tribological characterization of smooth diamond films grown in Ar–C60 and Ar–CH4 plasmas, Diamond Films and Technology, 6, 31 Bull, 1994, Mechanical and tribological performance of ion-beam deposited diamond-like carbon on polymers, Surface and Coatings Technology, 64, 87, 10.1016/S0257-8972(09)90008-1 Holleck, 1995, Multilayer PVD coatings for wear protection, Surface and Coatings Technology, 76, 77, 328, 10.1016/0257-8972(95)02555-3 Voevodin, 1995, Comparative tribology studies of hard ceramic and composite metal–DLC coatings in sliding friction conditions, Tribology Transactions, 38, 829, 10.1080/10402009508983476 Voevodin, 1996, Preparation of amorphous diamond-like carbon by pulsed laser deposition: a critical review, Surface and Coatings Technology, 82, 199, 10.1016/0257-8972(95)02734-3 Sherbiney, 1977, Friction and wear of ion-plated soft metallic films, Wear, 45, 211, 10.1016/0043-1648(77)90075-8 Aubert, 1990, Preparation and properties of MoS2 films grown by d.c. magnetron sputtering, Surface and Coatings Technology, 41, 127, 10.1016/0257-8972(90)90136-Z Finkin, E. F., A theory for the effect of film thickness and normal load in the friction of thin films. Journal of Lubrication Technology, 1969, July, 551–556. Dayson, 1971, The friction of very thin solid film lubricants on surfaces of finite roughness, ASLE Transactions, 14, 105, 10.1080/05698197108983232 Burnett, 1987, The mechanical properties of wear-resistant coatings I: Modelling of hardness behaviour, Thin Solid Films, 148, 41, 10.1016/0040-6090(87)90119-2 Jahanmir, 1989, Tribological characteristics of synthesized diamond films on silicon carbide, Wear, 133, 73, 10.1016/0043-1648(89)90114-2 Hayward, 1992, Effect of roughness on the friction of diamond on CVD diamond coatings, Wear, 157, 215, 10.1016/0043-1648(92)90063-E Sue, 1990, Friction and wear properties of titanium nitride coating in sliding contact with AISI 01 steel, Surface and Coatings Technology, 43–44, 709, 10.1016/0257-8972(90)90014-4 Guu, 1996, The tribological charasteristics of titanium nitride coatings. Part I Coating thickness effects, Wear, 194, 12, 10.1016/0043-1648(95)06630-6 Guu, 1996, The tribological charasteristics of titanium nitride coatings. Part II Comparison of two deposition processes, Wear, 194, 22, 10.1016/0043-1648(95)06631-4 Miyoshi, 1993, Friction and wear of plasma-deposited diamond films, Journal of Applied Physics, 74, 4446, 10.1063/1.354386 Argon, A. S., Mechanical properties of near-surface material in friction and wear. In Fundamentals of Tribology, ed. N. P. Suh and N. Saka. MIT Press, London, 1980, pp. 103–125. Berthier, 1989, Velocity accommodation in friction, Tribology Transactions, 32, 490, 10.1080/10402008908981917 Oliveira, 1996, An analysis of fracture and delamination in thin coatings subject to contact loading, Wear, 198, 15, 10.1016/0043-1648(95)06885-6 Gee, 1995, High resolution characterization of tribochemical films on alumina, Wear, 193, 133, 10.1016/0043-1648(95)06612-8 Mäkelä, 1985, Tribological properties of PVD TiN and TiC coatings, Finnish Journal of Tribology, 4, 74 Zuiker, 1995, Physical and tribological properties of diamond films grown in argon–carbon plasmas, Thin Solid Films, 270, 154, 10.1016/0040-6090(95)06882-1 Habig, 1995, Fundamentals of tribological behaviour of diamond, diamond-like carbon and cubic boron nitride coatings, Surface and Coatings Technology, 76, 77, 540, 10.1016/02578-9729(50)25480- Schouterden, 1995, Fretting of titanium nitride and diamond-like carbon coatings at high frequencies and low amplitude, Wear, 181, 183, 86, 10.1016/0043-1648(95)90012-8 Fouvry, 1994, Fretting behaviour of hard coatings under high normal load, Surface and Coatings Technology, 68, 69, 494, 10.1016/0257-8972(94)90207-0 Mohrbacher, 1995, The influence of humidity of fretting behavour of PVD TiN coatings, Wear, 180, 43, 10.1016/0043-1648(94)06538-1 Vancoille, 1993, Tribological and structural characterization of a physical vapour deposited TiC/Ti(C,N)/TiN multilayer, Tribology International, 26, 115, 10.1016/0301-679X(93)90019-W Ronkainen, H., Likonen, J., Koskinen, J. and Varjus, S., Effect of tribofilm formation on the tribological performance of hydrogenated carbon coatings. In Proceedings of International Conference on Metallurgical Coatings and Thin Films, ICMCTF'94, San Diego, CA, 25–29 April 1994, 14 pp. Donnet, C., Martin, J.-M., Le Mogne, T. and Belin, M., How to reduce friction in the millirange by solid lubrication. In Proceedings of International Tribology Conference, Yokohama, 1995, 6 pp. Gardos, M. N. Tribology and wear behavior of diamond. In Synthetic Diamond: Emerging CVD Science and Technology, ed. K. E. Spear and J. P. Dismukes. John Wiley and Sons, 1994, pp. 419–502. Erdemir, 1995, Characterization of transfer layers on steel surfaces sliding against diamond-like hydrocarbon films in dry nitrogen, Surface and Coatings Technology, 76, 77, 559, 10.1016/02578-9729(50)25189- Erdemir, A., Bindal, C., Fenske, G. R., Zuikner, C. and Wilbur, P., Characterization of transfer layers forming on surfaces sliding against diamondlike carbon. In Proceedings of ICMCTF96 Conference, San Diego, CA, 22–26 April 1996, 11 pp. Liu, Y., Erdemir, A. and Meletis, E. I., An investigation of the relationship between graphitization and frictional behavior of DLC coatings. In Proceedings of ICMCTF96 Conference, San Diego, CA, 22–26 April 1996, 11 pp. Neernick, D., Persoone, P., Sercu, M., Goel, A., Venkatraman, C., Kester, D., Halter, C., Swab, P. and Bray, D., Diamond-like nanocomposite coatings for low-wear and low-friction applications in hunid environments. In Proceedings of 10th International Conference on Thin Films, Salamanca, Spain, 23–27 September 1996, 3 pp. Meletis, 1995, Tribological characteristics of DLC films and duplex plasma nitriding/DLC coating treatment, Surface and Coatings Technology, 73, 39, 10.1016/0257-8972(94)02375-1 Watanabe, 1995, Tribological behaviour of cubic boron nitride film sliding against diamond, Transactions of ASME, Journal of Tribology, 117, 629, 10.1115/1.2831527 Zaidi, 1995, Influence of defects and morphology of diamond-like carbon coatings on their tribological behaviour, Surface and Coatings Technology, 76, 77, 564, 10.1016/0257-8972(95)02514-6 Holmberg, 1994, Tribological characteristics of hydrogenated and hydrogen-free diamond-like carbon coatings, Diamond Films and Technology, 4, 113 Donnet, 1994, Tribochemistry of diamond-like carbon coatings in various environments, Surface and Coatings Technology, 68/69, 626, 10.1016/0257-8972(94)90228-3 Erdemir, 1996, Tribological performance of diamond and diamondlike carbon films at evaluated temperatures, Tribology Transactions, 39, 787, 10.1080/10402009608983596 Bhushan, 1994, Tribological performance of thin film amorphous carbon overcoats for magnetic recording rigid disks in various environments, Surface and Coatings Technology, 68/69, 644, 10.1016/0257-8972(94)90231-3 Maillat, 1994, Tribological properties of amorphous diamond-like carbon coatings, Surface and Coatings Technology, 68/69, 638, 10.1016/0257-8972(94)90230-5 Pimenov, 1995, Tribological behaviour of smooth diamond films, Surface and Coatings Technology, 76, 77, 572, 10.1016/0257-8972(95)02610-X Skopp, A., Klafke, D., Buchkremer-Herrmanns, H., Ren, H. and Weiss, H., Oscillating sliding behaviour of MW PACVD diamond coatings. In Proceedings of 10th International Colloquium on Tribology—Solving Friction and Wear Problems, Technische Academie Esslingen, Ostfildern, 9–12 January 1996, pp. 1943–1959. Zhao, 1996, High friction coefficient of fullerene C70 film, Wear, 198, 165, 10.1016/0043-1648(96)06956-6 Fayeulle, S., Ehni, P.D. and Singer, I.L., Role of transfer films in wear of MoS2 coatings. In Mechanics of Coatings (Elsevier Tribology Series, Vol. 17), ed. D. Dowson et al. Elsevier, Amsterdam, 1990, pp. 129–138. Singer, 1991, A thermomechanical model for analyzing low wear rate materials, Surface and Coatings Technology, 49, 474, 10.1016/0257-8972(91)90103-4 Bhushan, B. and Gupta, B. K., Handbook of Tribology—Materials, Coatings and Surface Treatments. McGraw-Hill, New York, 1991. Martin, 1993, Superlubricity of molybdenum disulphide, The American Physical Society, Physical Review B, 48, 10583, 10.1103/PhysRevB.48.10583 Singer, 1996, Wear behavior of triode-sputtered MoS2 coatings in dry sliding contact with steel and ceramics, Wear, 195, 7, 10.1016/0043-1648(95)06661-6 Israelachvili, 1972, The measurement of van der Wahls dispersion forces in the range 1.5 to 130nm, Proceedings of the Royal Society, A331, 19, 10.1098/rspa.1972.0162 Thompson, 1989, Simulations of contact-line motion: slip and the dynamic contact angle, The American Physical Society, Physical Review Letters, 63, 766, 10.1103/PhysRevLett.63.766 McClelland, G. M. and Glosli, J. N., in NATO ASI Proceedings on Fundamentals of Friction, ed. I. L. Singer and H. M. Pollock. Kluwer, Dordrecht, 1992, pp. 405–426. Harrison, 1992, Molecular-dynamics simulations of atomic-scale friction of diamond surfaces, The American Physical Society, Physical Review B, 46, 9700, 10.1103/PhysRevB.46.9700 Harrison, 1993, Effect of atomic scale surface roughness on friction: a molecular dynamics study of diamond surfaces, Wear, 168, 127, 10.1016/0043-1648(93)90208-4 Krim, J., Friction at the atomic scale. Scientific American, 1996, October, 48–56. Beerschwinger, 1995, Wear at microscopic scales and light loads for MEMS applications, Wear, 181–183, 426, 10.1016/0043-1648(94)07023-7 Gardos, M. N., Tribological behaviour of polycristalline diamond films. In Proceedings of NATO Advanced Research Workshop Protective Coatings and Thin Films, Portimao, Portugal, 30 May–5 June 1996, 12 pp. Yamada, 1990, Friction and damage of coatings formed by sputtering polytetrafluoroethylene and polyimide, Surface and Coatings Technology, 43–44, 618, 10.1016/0257-8972(90)90006-X Ronkainen, H., Likonen, J. and Koskinen, J., Tribological properties of hard carbon films produced by the pulsed vacuum arc discharge method. In Proceedings of International Conference on Metallurgical Coatings and Thin Films, ICMCTF-1992, San Diego, CA, 6–10 April 1992, 20 pp. Huang, 1994, Friction behaviour of TiN, CrN and (TiAl)N coatings, Wear, 173, 13, 10.1016/0043-1648(94)90252-6 Bull, 1994, The effect of roughness on the friction and wear of diamond thin films, Surface and Coatings Technology, 68/69, 603, 10.1016/0257-8972(94)90224-0 Hopple, 1994, Development, testing and characterization of MoS2 thin film bearings, Surface and Coatings Technology, 68/69, 398, 10.1016/0257-8972(94)90193-7 Schintlmeister, 1983, Properties, applications and manufacture of wear-resistant hard material coatings for tools, Thin Solid Films, 107, 117, 10.1016/0040-6090(83)90014-7 AB Sandvik Coromant, Modern Metal Cutting: A Practical Handbook. Sandvik Coromant, Sweden, 1994. Subramanian, 1993, Review of multicomponent and multilayer coatings for tribological applications, Wear, 165, 85, 10.1016/0043-1648(93)90376-W Franklin, S. E., Wear behaviour of CVD and PVD coated tools in metal stamping and plastics injection moulding. In Surface Engineering Practice, ed. K. N. Strafford, P. K. Datta and J. S. Gray. Ellis Horwood, Chichester, 1990. Springer, 1978, Structure and mechanical properties of Al/AlxOy vacuum deposited laminates, Thin Solid Films, 54, 197, 10.1016/0040-6090(78)90199-2 Springer, 1982, Characterisation of aluminium–aluminium nitride coatings sputter-deposited using the pulsed gas process, Journal of Vacuum Science and Technology, 20, 462, 10.1116/1.571334 Koehler, J. S., Attempt to design a strong solid. Physical Review Section B2, 1970, 547–551. Bunshah, 1984, Structure–property relationships in Cr/Cu and Ti/Ni microlaminate composites, Thin Solid Films, 112, 227, 10.1016/0040-6090(84)90213-X Sans, 1983, Preparation and properties of TiC/Ni microlaminates, Thin Solid Films, 107, 345, 10.1016/0040-6090(83)90295-X Barnett, S. A., Deposition and Mechanical Properties of Superlattic Thin Films. Academic Press, 1993. Barnett, 1994, Plastic and elastic properties of compositionally modulated thin films, Annual Reviews in Materials Science, 24, 481, 10.1146/annurev.ms.24.080194.002405 Holleck, 1986, Material selection for hard coatings, Journal of Vacuum Science and Technology, A4, 2661, 10.1116/1.573700 Holleck, H., Designing advanced coatings for wear protection. In Proceedings of Conference on Surface Engineering and Heat Treatment, Past, Present and Future, ed. P. H. Morton. Inst. of Materials, London, 1990. Holleck, 1995, Multilayer PVD coatings for wear protection, Surface and Coatings Technology, 76–77, 328, 10.1016/0257-8972(95)02555-3 Holleck, 1990, Multilayer coatings—influence of fabrication parameters on constitution and properties, Surface and Coatings Technology, 41, 179, 10.1016/0257-8972(90)90166-A Matthews, 1994, Engineering applications for diamond-like carbon, Diamond and Related Materials, 3, 902, 10.1016/0925-9635(94)90297-6 Leyland, 1994, Thick Ti/TiN multilayered coatings for abrasive and erosive wear resistance, Surface and Coatings Technology, 70, 19, 10.1016/0257-8972(94)90069-8 Bull, 1996, Multilayer coatings for improved performance, Surface and Coatings Technology, 78, 173, 10.1016/0257-8972(94)02407-3 Ensinger, W., Enders, B., Emmerich, R., Martin, H., Hubler, R., Wolf, G. K., Alberts, L., Schroer, A., Schreiner, W. H., Stedile, F. C. and Baumol, I. J. R., Properties of multilayered hard coatings deposited by ion beam and plasma techniques, Le Vide, Les Couches Minces, 1992, (Suppl. No. 261), 355–357. Bantle, 1995, Investigation into the impact wear behaviour of ceramic coatings, Surface Coatings and Technology, 74–75, 857, 10.1016/0257-8972(95)08314-6 Voevodin, 1995, Dynamic impact wear of TiCxNy and Ti–DLC composite coatings, Wear, 185, 151, 10.1016/0043-1648(95)06603-9 Vetter, 1993, The architecture and performance of multilayer and compositionally gradient coatings made by cathodic arc evaporation, Surface and Coatings Technology, 61, 209, 10.1016/0257-8972(93)90227-F Leyland, 1993, TiN and CrN PVD coatings on electroless nickel coated steel substrates, Surface and Coatings Technology, 60, 474, 10.1016/0257-8972(93)90135-B Bin-Sudin, 1996, Substrate surface finish effects in duplex coatings of PAPVD TiN and CrN with electroless nickel–phosphorus interlayers, Surface and Coatings Technology, 81, 215, 10.1016/0257-8972(95)02529-4 Matthews, 1995, Plasma based surface engineering processes for wear and corrosion protection, Journal of Vacuum Science and Technology, A13, 1202, 10.1116/1.579862 Matthews, 1995, Hybrid techniques in surface engineering, Surface and Coatings Technology, 71, 88, 10.1016/0257-8972(94)01004-3 Matthews, A., Plasma-based vacuum deposition processes to enhance wear and corrosion performance. Presented at NATO Advanced Research Workshop on Protective Coatings and Thin Films. Eds.: Pauleau, Y. and Berna, P. B., Kluner Academia Publishers, Dordrecht, 1997, p.1–12. Knotek, 1986, On structure and properties of sputtered Ti and Al based hard compound films, Journal of Vacuum Science and Technology, A4, 2695, 10.1116/1.573708 Jehn, 1986, Morphology and properties of sputtered (Ti, Al)N layers on high speed steel substrates as a function of deposition temperature and sputtering atmosphere, Journal of Vacuum Science and Technology, A4, 2701, 10.1116/1.573709 Bienk, 1995, Wear and friction properties of hard PVD coatings, Surface and Coatings Technology, 76/77, 475, 10.1016/0257-8972(95)02498-0 Sproul, 1994, Multilayer, multicomponent and multiphase physical vapor deposition coatings for enhanced performance, Joournal of Vacuum Science and Technology, A12, 1595, 10.1116/1.579361 Vancoille, 1993, Dry sliding wear of TiN-based ternary PVD coatings, Wear, 165, 41, 10.1016/0043-1648(93)90370-2 Gissler, 1994, Structure and properties of Ti–B–N coatings, Surface and Coatings Technology, 68/69, 556, 10.1016/0257-8972(94)90217-8 Ronkainen, 1990, Comparative tribological and adhesion studies of some titanium-based ceramic coatings, Surface and Coatings Technology, 43/44, 888, 10.1016/0257-8972(90)90029-C Knotek, 1992, Multicomponent and multilayer physical vapour deposited coatings for cutting tools, Surface and Coatings Technology, 54/55, 241, 10.1016/0257-8972(92)90169-B Sproul, 1996, Physical vapour deposition tool coatings, Surface and Coatings Technology, 81, 1, 10.1016/0257-8972(95)02616-9 Jehn, H. A., Rother, B. and Hoffman, S., Preparation and homogeneity of multicomponent thin films deposited by vacuum and plasma-assisted processes. In Proceedings of 12th Italian Conference on Vacuum Science and Technology (Bolzane, Italy, March 1993), Vol. 23. Vuoto, 1994, pp. 10–17. Pauleau, 1995, Sputter deposited lubricant thin films for high temperature applications, Journal of the Society of Tribologists and Lubrication Engineers, STLE Lubrication Engineering, 52, 481 Zabinski, 1994, Synthesis and characterisation of high temperature oxide lubricant, Journal of Materials Science, 29, 5675, 10.1007/BF00366870 Ronkainen, 1994, Characterization of wear surfaces in dry sliding of steel and alumina on hydroginated and hydrogen-free carbon films, Diamond and Related Materials, 3, 1329, 10.1016/0925-9635(94)90147-3 Neuville, S. and Matthews, A., Hard carbon coatings: the way forward. To be published. Ronkainen, H. and Holmberg, K., Friction and wear properties on dry, water and oil lubricated DLC against alumina and DLC against steel contacts. To be published. Drees, 1996, The electrochemical and wear behaviour of amorphous diamondlike carbon coatings and multilayered coatings in aqueous environments, Surf. Coat. Technol., 86–87, 575, 10.1016/S0257-8972(96)03054-X Miyake, 1993, Microtribological improvement of carbon film by silicon inclusion and fluorination, Wear, 168, 155, 10.1016/0043-1648(93)90211-4 Grischke, 1995, Application-oriented modifications of deposition processes for diamond-like-carbon-based coatings, Surface and Coatings Technology, 74–75, 739, 10.1016/0257-8972(94)08201-4