A machine learning-based formulation for predicting shear capacity of squat flanged RC walls

Gulec, 2008, Shear strength of squat rectangular reinforced concrete walls, ACI Struct J, 105, 488 Barda, 1977, Shear strength of low-rise walls with boundary elements, Special Publ, 53, 149 Wood, 1990, Shear strength of low-rise reinforced concrete walls, Struct J, 87, 99 Sánchez-Alejandre, 2010, Shear strength of squat reinforced concrete walls subjected to earthquake loading—trends and models, Eng Struct, 32, 2466, 10.1016/j.engstruct.2010.04.022 Gulec, 2011, Empirical equations for peak shear strength of low aspect ratio reinforced concrete walls, ACI Struct J, 108 Kassem, 2015, Shear strength of squat walls: a strut-and-tie model and closed-form design formula, Eng Struct, 84, 430, 10.1016/j.engstruct.2014.11.027 Adorno-Bonilla CM. Shear strength and displacement capacity of squat reinforced concrete shear walls: UNIVERSITY OF PUERTO RICO MAYAGÜEZ CAMPUS; 2016. ACI-318-14. Building code requirements for structural concrete (ACI 318-14) and commentary. American Concrete Institute; 2014. ASCE/SEI-43‐05. Seismic design criteria for structures, Systems, and Components in Nuclear Facilities. American Society of Civil Engineers, Reston, Virginia2005. EC8. Eurocode 8: Design of Structures for Earthquake Resistance - Part 1: General Rules. Seismic Actions and Rules for Buildings. 2004. J. Ma B. Li Experimental and Analytical Studies on H-Shaped Reinforced Concrete Squat Walls 115 2 2018 10.14359/51701144. Ma, 2019, Seismic behavior of L-shaped RC squat walls under various lateral loading directions, J Earthq Eng, 23, 422, 10.1080/13632469.2017.1326424 Gulec, 2009, Peak shear strength of squat reinforced concrete walls with boundary barbells or flanges, ACI Struct J, 106, 368 Del Carpio, 2012, Predictive equations for the peak shear strength of low-aspect ratio reinforced concrete walls, J Earthq Eng, 16, 159, 10.1080/13632469.2011.613529 Ma, 2020, Peak shear strength of flanged reinforced concrete squat walls, J Struct Eng, 146, 04020037, 10.1061/(ASCE)ST.1943-541X.0002575 Gao, 2019, Development of a novel soft-computing framework for the simulation aims: a case study, Eng Comput, 35, 315, 10.1007/s00366-018-0601-y Ghaboussi, 1991, Knowledge-based modeling of material behavior with neural networks, J Eng Mech, 117, 132, 10.1061/(ASCE)0733-9399(1991)117:1(132) Vanluchene, 1990, Neural networks in structural engineering, Comp-Aided Civil Infrastruct Eng, 5, 207, 10.1111/j.1467-8667.1990.tb00377.x Flood, 1998, Artificial Neural Networks for Civil Engineers: advanced features and applications, ASCE Publications Cao, 1998, Application of artificial neural networks to load identification, Comput Struct, 69, 63, 10.1016/S0045-7949(98)00085-6 Naderpour, 2010, Prediction of FRP-confined compressive strength of concrete using artificial neural networks, Compos Struct, 92, 2817, 10.1016/j.compstruct.2010.04.008 Pham, 2014, Predicting stress and strain of FRP-confined square/rectangular columns using artificial neural networks, J Compos Constr, 18, 04014019, 10.1061/(ASCE)CC.1943-5614.0000477 Chojaczyk, 2015, Review and application of artificial neural networks models in reliability analysis of steel structures, Struct Safety, 52, 78, 10.1016/j.strusafe.2014.09.002 Salehi, 2018, Emerging artificial intelligence methods in structural engineering, Eng Struct, 171, 170, 10.1016/j.engstruct.2018.05.084 Tran, 2019, Application of ANN in predicting ACC of SCFST column, Compos Struct, 228, 111332, 10.1016/j.compstruct.2019.111332 Tran, 2019, A new empirical formula for prediction of the axial compression capacity of CCFT columns, Steel Compos Struct, 33, 181 Tran, 2020, A practical ANN model for predicting the PSS of two-way reinforced concrete slabs, Eng Comp, 1 Tran, 2020, Efficiency of three advanced data-driven models for predicting axial compression capacity of CFDST columns, Thin-Walled Struct, 152, 106744, 10.1016/j.tws.2020.106744 Nguyen, 2020, Predicting the axial compressive capacity of circular concrete filled steel tube columns using an artificial neural network, Steel Compos Struct, 35, 415 Chen, 2018, Prediction of shear strength for squat RC walls using a hybrid ANN–PSO model, Eng Comp, 34, 367, 10.1007/s00366-017-0547-5 Moradi MJ, Hariri-Ardebili MA. Developing a library of shear walls database and the neural network based predictive meta-model. Applied Sci. 2019;9:2562. Mangalathu, 2020, Data-driven machine-learning-based seismic failure mode identification of reinforced concrete shear walls, Eng Struct, 208, 10.1016/j.engstruct.2020.110331 Kabeyasawa, 1998, Tests and analyses of high-strength reinforced concrete shear walls in Japan, Special Publ, 176, 281 Sanada Y, Kabeyasawa T. Local force characteristics of reinforced concrete shear wall. 8th US National Conference on Earthquake Engineering2006. Matsui T, Kabeyasawa T, Koto A, Kuramoto H, Nagashima I. Shaking table test and analysis of reinforced concrete walls. Proc, 13th World Conference on Earthquake Engineering2004. 1985 Synge, 1980 Palermo, 2002, Behavior of three-dimensional reinforced concrete shear walls, ACI Struct J, 99, 81 Saito H, Kikuchi R, Kanechika M, Okamoto K. Experimental Study of the Effect of Concrete Strength on Shear Wall Behavior. 1989. Sato, 1989, Behavior of Shear Wall Using Various Yield Strength of Rebar Part 1, An Experimental Study Seki M, Kobayashi J, Shibata A, Kubo T, Taira T, Akino K. Restoring force verification test on RC shear wall. 1995. Dabbagh, 2005 Endo T, Adachi H, Nakanishi M. Force-Deformation Hysteresis Curves of Reinforced Concrete Shear Walls. Proc of the 7th WCEE1980. NUPEC. NUPEC’s Seismic Ultimate Dynamic Response Test, Comparison Report. OECD/NEA/CSNI, Issy-Les-Moulineaux, France, Report No. OCDE/GD (96) 188…; 1991. Chiba O, Fukuzawa R, Hatori T, Yagishita K, Sato Y, Higashiura A et al. Experimental study on heavily reinforced concrete shear walls. 1985. Fukuzawa R, Chiba O, Hatori T, Yagishita K, Watabe M. Study on load-deflection characteristics of heavily reinforced concrete shear walls. Proceedings 1988. p. 4. Park H-G, Baek J-W, Lee J-H, Shin H-M. Cyclic Loading Tests for Shear Strength of Low-Rise Reinforced Concrete Walls with Grade 550 MPa Bars. ACI Struct. J. 2015;112. Li, 2015, Experimental evaluation of seismic performance of squat RC structural walls with limited ductility reinforcing details, J Earthq Eng, 19, 313, 10.1080/13632469.2014.962669 Fu, 2018, Experimental studies and finite element analysis on seismic shear behavior of high-strength rebars shear walls with flanges, China Civ Eng J, 51, 44 Jiang, 2013, Experimental study on damage behavior of reinforced concrete shear walls subjected to cyclic loads, J Earthq Eng, 17, 958, 10.1080/13632469.2013.791895 Gupta, 1998, High-strength concrete (HSC) structural walls, Struct J, 95, 194 Mansur, 1992, Tests on reinforced concrete low-rise shear walls under cyclic loading. Concrete Shear, Earthquake, 95 Teng S, Chandra J. Cyclic Shear Behavior of High Strength Concrete Structural Walls: Petra Christian University; 2016. Liu X, Burgueño R, Egleston E, Hines E. Inelastic Web Crushing Performance Limits of High-Strength-Concrete Structural Wall–Single wall Test Program. Report No CEE-RR-2009/03, Michigan State University, 281pp; 2009. Chiou Y, Mo Y, Hsiao F, Liou Y, Sheu M. Behavior of High Seismic Performance Walls. 13th World Conference on Earthquake Engineering, Vancouver, Canada, August, paper2004. Nakamura, 2009, Analytical study on energy consumption and damage to cylindrical and I-shaped reinforced concrete shear walls subjected to cyclic loading, Eng Struct, 31, 999, 10.1016/j.engstruct.2008.12.013 Akita T, Kuramoto H, Matsui T, and , Kabeyasawa T. Hysteresis Modeling of RC Shear Walls Based on Static Loading Test. The Eighth US National Conference on Earthquake Engineering. San Francisco, CA, USA.2006. Maier J. Shear Wall Tests. International Workshop on Concrete Shear in Earthquake. Department of Civil and Environmental Engineering, University of Houston, Houston, TX, USA.1991. Barda, 1972 Han, 2018, Experimental study on deformation index limits of I-shaped shear walls, China Civ Eng J, 51, 26 Xiang-Dong, 1999 Mo, 1996, Behavior of reinforced-concrete-framed shear walls, Nucl Eng Des, 166, 55, 10.1016/0029-5493(96)01244-7 Chaabene, 2020, Machine learning prediction of mechanical properties of concrete: Critical review, Constr Build Mater, 260 Fausett, 2006 Nikbin, 2017, A new empirical formula for prediction of fracture energy of concrete based on the artificial neural network, Eng Fract Mech, 186, 466, 10.1016/j.engfracmech.2017.11.010 Hadi, 2003, Neural networks applications in concrete structures, Comput Struct, 81, 373, 10.1016/S0045-7949(02)00451-0 Mathworks I. MATLAB and statistics toolbox release 2012b. Natick (Massachusetts, United States)2012. Asteris, 2020, Concrete compressive strength using artificial neural networks, Neural Comput Applic, 32, 11807, 10.1007/s00521-019-04663-2 Armaghani, 2019, Soft computing-based techniques for concrete beams shear strength, Procedia Struct Integrity, 17, 924, 10.1016/j.prostr.2019.08.123 J.-W. Baek H.-G. Park J.-H. Lee C.-J. Bang Cyclic loading test for walls of aspect ratio 1.0 and 0.5 with grade 550 MPa (80 ksi) shear reinforcing bars ACI Struct. J. 2017;114:969.