Cost-effectiveness of Rubber and Polymer Modified Asphalt Mixtures as Related to Sustainable Fatigue Performance

Souliman, 2011, Assessment of the Extended Fatigue Life for Rubber and Polymer Modified Asphalt Mixtures Using Flexural Bending Beam Fatigue Test. Jordan Journal of Civil Engineering, 5, 210 Roberts, 2004, Comparative Performance of Rubber Modified Hot Mix Asphalt Under ALF Loading. Loiusiana Transporation Research Center, Techincal Summary Report, 374 Von Quintus, 2007, Quantification of the Effect of Polymer Modified Asphalt on Flexible Pavement Performance. Transportation Research Record: Journal of the Transportation Research Board, No. 2001, Transportation Research Board of the National Academies, Washington D.C., 141, 10.3141/2001-16 Buncher, M., Quantifying the Benefits of Polymer Modified Asphalt-Reducing Pavement Distress. Asphalt Institute: IS-215. 2009. Timm, D.H., M.M. Robbins, and R. Kluttz. Full-Scale Structural Characterization of a Highly-Polymer-Modified Asphalt Pavement. Preprint CD, prepared for the 90th Annual Meeting of the Transportation Research Board, Washington, D.C., Jan. 23-27, 2011. Mashaan NS. The effect of crumb rubber modifier to the properties and rheological behaviour of asphalt binder. M.S. thesis. Kuala Lumpur, Malaysia: University of Malaya; 2012. Hamed FKM. Evaluation of fatigue resistance for modified asphalt concrete mixture based on dissipate energy concept. Ph.D. thesis. Darmstadt, Germany: Technische Universität Darmstadt; 2010. Raad, 1998, Fatigue behavior of rubber-modified pavements Transportation Research Record: Journal of the Transportation Research Board 1639, Transportation Research Board of the National Academies Washington D.C., 73, 10.3141/1639-08 Mashaan, 2013, Investigating the rheological properties of crumb rubber modified bitumen and its correlation with temperature susceptibility, Materials Research, 16, 116, 10.1590/S1516-14392012005000166 Aflaki, 2011, Using two-way ANOVA and hypothesis test in evaluating crumb rubber modification (CRM) agitation effects on rheological properties of bitumen. Construction and Building Materials, 25, 2094 Siddharthan, 1998, Pavement Strain from Moving Dynamic 3-D Load Distribution, Journal of Transportation Eng., ASCE, 124, 557 Kaloush, K., Biligiri, K., Nordgen, T., Zeiada, W., Rodezno, M., Souliman, M., Reed, J., and Stempihar, J. Laboratory Evaluation of Asphalt-Rubber Gap Graded Mixtures Constructed on Stockholm Highway in Sweden. Asphalt Rubber Conference, Munich, Germany 2012. Steiner, A. AASHTO Crumb Rubber Modified (CRM) 1993 Cost Survey, September 1993, AASHTO. Texas Department of Transportation Estimates. 2015. Lamptey, G., S. Labi, M. Ahmad, and K. Sinha., Life Cycle Cost Analysis for INDOT Pavement Design Procedures. Report FHWA/IN/JTRP-2004/28. Joint Transportation Research Program, Indiana Department of Transportation and Purdue University, West Lafayette, IN, 2005. Peshkin, D., Smith, K., Wolters, A., Krstulovich, J., Moulthrop, J., Alvarado, C., Preservation Approaches for High-Traffic-Volume Roadways. SHRP 2 Renewal Research: Report S2-R26-Rr-1. Washington, D.C. 2011.