Bending strength of hot-rolled elliptical hollow sections

McKechnie, 2006, Terminal 5, London Heathrow: The main terminal building envelope, The Arup Journal, 41, 36 Gardner, 2005, Structural steel oval hollow sections, The Structural Engineer, 83, 32 Chan TM, Gardner L. Experimental and numerical studies of elliptical hollow sections under axial compression and bending. In: Proceedings of the 11th international symposium on tubular structures. 2006. p. 163–70 Chan, 2008, Compressive resistance of hot-rolled elliptical hollow sections, Engineering Structures, 30, 522, 10.1016/j.engstruct.2007.04.019 Gardner, 2007, Cross-section classification of elliptical hollow sections, Steel and Composite Structures, 7, 185, 10.12989/scs.2007.7.3.185 EN 10210-2. Hot finished structural hollow sections of non-alloy and fine grain steels — part 2: Tolerances, dimensions and sectional properties. CEN. 2006 Corus. Celsius® 355 ovals — sizes and resistances eurocode version. Corus tubes — structural & conveyance business; 2006 Gioncu, 1997, Available rotation capacity of wide-flange beams and beam-columns, part 1. Theoretical approaches, Journal of Constructional Steel Research, 43, 161, 10.1016/S0143-974X(97)00044-8 Stranghöner N, Sedlacek G, Boeraeve Ph. Rotation requirement and rotation capacity of rectangular, square and circular hollow section beams. In: Proceedings of the 6th international symposium on tubular structures. 1994. p. 143–50 Schilling, 1965, Buckling strength of circular tubes, Journal of the Structural Division, ASCE, 91, 325, 10.1061/JSDEAG.0001335 Jirsa JO, Lee FH, Wilhoit JC, Merwin JE. Ovaling of pipelines under pure bending. In: Proceedings of the 4th annual offshore technology conference. 1972 Korol, 1972, Plastic behavior of hollow structural sections, Journal of the Structural Division, ASCE, 98, 1007, 10.1061/JSDEAG.0003221 Sherman DR, Glass AM. Ultimate bending capacity of circular tubes. In: Proceedings of the 6th annual offshore technology conference. 1974 Jiao, 2004, Section slenderness limits of very high strength circular steel tubes in bending, Thin-Walled Structures, 42, 1257, 10.1016/j.tws.2004.03.020 Hasan, 1989, Plastic bending tests of cold-formed rectangular hollow sections, Steel Construction, Journal of Australian Institute of Steel Construction, 23, 2 Zhao, 1991, Tests to determine plate slenderness limits for cold-formed rectangular hollow sections of grade C450, Steel Construction, Journal of Australian Institute of Steel Construction, 25, 2 Wilkinson, 1998, Tests to examine compact web slenderness of cold-formed RHS, Journal of Structural Engineering, ASCE, 124, 1166, 10.1061/(ASCE)0733-9445(1998)124:10(1166) Galambos TV. Deformation and energy absorption capacity of steel structures in the inelastic range. Bulletin no. 8. American Iron and Steel Institute; 1968 Lay, 1965, Inelastic steel beams under uniform moment, Journal of the Structural Division, ASCE, 91, 67, 10.1061/JSDEAG.0001370 Lay, 1967, Inelastic beams under moment gradient, Journal of the Structural Division, ASCE, 93, 381, 10.1061/JSDEAG.0001589 ABAQUS, 2006 Gerard G, Becker H. Handbook of structural stability: Part III — Buckling of curved plates and shells. Technical note 3783. NACA. 1957 EN 1993-1-1. Eurocode 3: Design of steel structures — Part 1-1: General rules and rules for buildings. CEN. 2005 Rondal J, Boeraeve Ph, Sedlacek G, Stranghöner N, Langenberg P. Rotation capacity of hollow beam sections. CIDECT. 1995 Sedlacek G, Dahl W, Stranghöner N, Kalinowski B, Rondal J, Boreaeve Ph. Investigation of the rotation behaviour of hollow section beams. EUR 17994 EN, European Commission. 1998 Sherman, 1976, Tests of circular steel tubes in bending, Journal of the Structural Division, ASCE, 102, 2181, 10.1061/JSDEAG.0004478 Sherman DR. Inelastic flexural buckling of cylinders. In: Proceedings of the steel structures: Recent research advances and their applications to design. 1986. p. 339–57 BS 5950-1, 2000 Driscoll GC. Rotation capacity requirements for beams and portal frames. Ph.D. thesis. Lehigh University; 1958 Kerfoot RP. Rotation capacity of beams. Report 297.14. Fritz Engineering Laboratory, Lehigh University; 1965 ASCE, 1971 Sedlacek G, Feldmann M. Background document 5.09 for chapter 5 of Eurocode 3 Part 1.1 — The b/t ratios controlling the applicability of analysis models in Eurocode 3 Part 1.1. Aachen. 1995 AS 4100. Steel structures. Australian standard. 1998 Yura, 1978, The bending resistance of steel beams, Journal of Structural Division, ASCE, 104, 1355, 10.1061/JSDEAG.0004982 AISC, 2005 AISC, 2005 Bild St, Roik K, Sedlacek G, Stutzki Ch, Spangemacher R. Background document for chapter 5 of Eurocode 3 — The b/t-ratios controlling the applicability of analysis models in Eurocode 3. Draft. Aachen. 1989 Eckhardt C. Classification of oval hollow sections. University of Southampton; 2004