A short review on hydraulic classification and its development in mineral industry

Subba Rao, 2011 Heiskanen, 1993 Richards, 1940 Taggart, 1945 Allen, 1990, The motion of a sphere in a viscous fluid, Philos. Mag., 50, 519, 10.1080/14786440009463941 Wieselberger, 1923, Ergebnisse der Aerodynamischen Versuchsanstalt zu Göttingen Majumder, 2007, Settling velocities of particulate systems—a critical review of some useful models, Miner. Metall. Process., 24, 237 Gupta, 2006 Gui, 2010, Study on basic theory of the grain settlement in fluidised bed, 757 Bardwell, 1913, Application of hindered settling to hydraulic classifiers, Trans. AIME, 266 Li, 1992, 32 Yao, 1992, 52 Luo, 2002, Separation theory of fluidization, 5 Wei, 2002, Dynamics in mineral separating processes, 79 Pryor, 1965 Kelly, 1982 Gaudin, 1939 Bakshi, 1996, Effect of viscosity on the cut size of hydrocyclone classifiers, Min. Eng., 9, 881, 10.1016/0892-6875(96)00079-9 Bakshi, 1996, The effect of slurry viscosity on hydrocyclone classification, Int. J. Miner. Process., 48, 39, 10.1016/S0301-7516(96)00012-9 Kawatra, 1988, Effect of temperature on hydrocyclone efficiency, Int. J. Min. Eng., 23, 205 Lynch, 1977, Mineral crushing and grinding circuits: their simulation, optimization, design and control Eisele, 2006, Causes and significance of inflections in hydrocyclone efficiency curves, 131 Lynch, 1968, Studies on the operational characteristics of hydrocyclone classifiers, Indian J. Technol., 6 Lynch, 1974, Influence of hydrocyclone diameter on reduced efficiency curves, Int. J. Min. Eng., 1, 173 Weiss, 1985, vol. 1 Ghiani, 1996, A simple, low cost wet classifier, 77 Hukki, 1982, Two stage hydraulic classification—a report on an industrial application Crespo, 2009, Kinetic model for the multi-spigot hydrosizer, Miner. Eng., 10.1016/j.mineng.2009.08.007 Himsworth, 1974, Hindered settling classifiers: the bypass particle size controller, Powder Technol., 10, 181, 10.1016/0032-5910(74)85041-2 Drummond, 2002, Teetered bed separator — the Australian experience, J. South. Afr. Inst. Min. Metall., 385 Mukherjee, 2009, Liquid/solid fluidization its role and limitation in fine beneficiation — a review, Miner. Process. Extr. Metall. Rev. Int. J., 30, 280, 10.1080/08827500902743916 Epstein, 1999, Liquid fluidization of binary particle mixtures: 3, Stratification by size and related topics, Chem. Eng. Sci., 54, 401, 10.1016/S0009-2509(98)00250-4 Bear, 1988 Galvin, 1999, Dense medium separation using a teetered bed separator, Min. Eng., 12, 1059, 10.1016/S0892-6875(99)00092-8 Garside, 1977, Velocity voidage relationships for flidisation and sedimentation in solid–liquid systems, Ind. Eng. Chem. Process. Des. Dev., 16, 206, 10.1021/i260062a008 Zigrang, 1981, An explicit equation for particle settling velocities in solid liquid systems, AIChE J., 27, 1043, 10.1002/aic.690270629 Kohmuench, 2006, Application of the cross flow teeter bed separator in the U.S coal industry, Miner. Metall. Process., 23, 187 Luttrell, 2006, Development of high efficiency hydraulic separators, Miner. Metall. Process., 23, 33 Kim, 2004, Simulation of hindered-settling column separations when processing fine anthracite refuse, Int. J. Coal Prep. Util., 24, 261, 10.1080/07349340490885006 Kim, 2004, Development and application of a dynamic model for hindered-settling column separations, Miner. Eng., 17, 403, 10.1016/j.mineng.2003.11.013 Kwon, 2008, Simulation of hindered settling column separation process using the DEM, Int. Min. Process. Congr (2008), Beijing, China, 24–28th Sept., 747 Ratlou, 2006, Teetered bed separator and its effect on navigation plant fines qualities, DMS and gravity concentration operations and technology in South Africa South. Afr. Inst. Min. Metall., 1st Jan, 1 Li, 2013, Changes of size, ash and density of coal particles on the column axis of a liquid–solid fluidized bed, Powder Technol., 245, 251, 10.1016/j.powtec.2013.04.039 Nicol, 1998, A case study in the implementation of novel technology: teetered bed separators, 31 Maharaj, 2007, The effect of distributor configuration on the hydrodynamicsof the teetered bed separator, Miner. Eng., 20, 1089, 10.1016/j.mineng.2007.04.015 Pan, 2008, Recovery of iron ore particles from the slimes of Dalli mines through fluidised bed classifier system, International Seminar on Mineral Processing Technology (MPT-2008), April 22–24, 2008, CSIR, Trivandrum, India, 22–24th Apr., 240 Littler, 1986, Automatic hindered-settling classifier for hydraulic sizing and mineral beneficiation, Trans. Inst. Min. Metall., 95, 133 Epstein, 2005, Teetering, Powder Technol., 151, 2, 10.1016/j.powtec.2004.11.026 Honaker, 1999, Dynamic modeling of fine coal separations in a hindered-bed classifier, Coal Prep., 21, 211, 10.1080/07349340008945619 Elder, 1999, Application of floatex density separator for the heavy mineral sands industry, Heavy Minerals (1999), Johannesburg, South. Afr. Inst. Min & Met. Mankosa, 1995, Combining hydraulic classification and spiral concentration for improved efficiency in fine coal recovery circuits, 99 Reed, 1995, In-plant testing of the Floatex density separator for fine coal cleaning, 163 Bhaskar, 2005, Application of Floatex density separator for processing of low-grade iron ore fines, 155 Hearn, 2002, The use of hindered settling to improve iron ore gravity concentration circuits, vol.1, 929 Bazin, 2011, Analysis and modelling of the operation of a hydraulic classifier for iron ore concentrate Bazin, 2012, The use of simulation for process diagnosis: application to a gravity separator, Int. J. Miner. Process., 104–105, 11, 10.1016/j.minpro.2011.11.009 Sarkar, 2008, In depth analysis of alumina removal from iron ore fines using teetered bed gravity separator, vol. 117 (1), 1 Kumar, 2009, Characterisation and pre-concentration of chromite values from plant tailings using Floatex Density Separator, J. Miner. Mater. Charact. Eng., 8, 367 Murthy, 2012, Assessing the performance of a floatex density separator for the recovery of iron from low-grade Australian iron ore fines — a case study Das, 2009, Prediction of separation performance of Floatex Density Separator for processing of fine coal particles, Int. J. Miner. Process., 91, 41, 10.1016/j.minpro.2008.11.004 Sarkar, 2008, Study of separation features in floatex density separator for cleaning fine coal, Int. J. Miner. Process., 86, 40, 10.1016/j.minpro.2007.10.002 Kumar, 2011, Prediction of process input interactions of Floatex Density Separator performance for separating medium density particles, Int. J. Min. Eng., 100, 136 C.R. Kumar, S.K. Tripathy, S. Mohanan, T. Venugopalan, N. Suresh, Evaluation of floatex density separator performance using silica sand, Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Editors: R. Singh, A. Das, P.K. Banerjee, K.K. Bhattacharyya and N.G. Goswami, © NML Jamshedpur, 15–17th Dec. 2010, pp. 701–706. C.R. Kumar, R.R. Singh, O.K. Venugopalan, V.S. Murty, S.S. Kumar, Effect of teetering pulp density in floatex density separator — a case study, Proceedings of the International Seminar on Mineral Processing Technology — 2006, Chennai, India, 8–10th Mar. 2006, pp. 564–567. Kumar, 2012, Prospects of hydraulic bed separation and its application for chromite processing, 5265 Tripathy, 2013, Characterisation and separation studies of Indian chromite beneficiation plant tailing, Int. J. Miner. Process., 122, 47, 10.1016/j.minpro.2013.04.008 Raghukumar, 2012, Beneficiation of Indian high alumina iron ore fines — a case study, Int. J. Min. Eng. Miner. Process., 1, 94, 10.5923/j.mining.20120102.11 Dunn, 2000, A hydraulic classifier evaluation: upgrading heavy mineral concentrates Sarkar, 2010, A comparative study of slip velocity models for the prediction of performance of floatex density separator, Int. J. Miner. Process., 94, 20, 10.1016/j.minpro.2009.11.001 G. Kapure, C. Kari, S.M. Rao, N.D. Rao, The feasibility of a slip velocity model for predicting the enrichment of chromite in a Floatex density separator, Int. J. Miner. Process., 82 (2007), pp. 86–95. Tripathy, 2013, Preliminary studies on teeter bed separator for separation of manganese fines, Powder Technol., 239, 284, 10.1016/j.powtec.2013.02.015 Kari, 2006, Predicting the chromite mineral upgradation in Floatex Density Separator using hindered settling models, ISIJ Int., 46, 966, 10.2355/isijinternational.46.966 Remes, 2011, Simulation and pilot experiments on pyrite concentrate separation in a Floatex density separator, Miner. Metall. Process., 28, 62 Dey, 2012, Processing of electronic waste in a counter current teeter-bed separator, J. Environ. Manag., 107, 45, 10.1016/j.jenvman.2012.04.018 Kumar, 2013, Classification performance evaluation of floatex density separator for coal fines, Fuel, 108, 303, 10.1016/j.fuel.2013.02.033 Kumar, 2012, Prediction of classification performance of floatex density separator using coal, Tata Search, 1, 15 Roy, 2014, Segregation and process features in a teeter bed separator as revealed by high-speed videography and image processing, Miner. Process. Extr. Metall. Rev. Int. J., 35, 15, 10.1080/08827508.2012.700659 Kohmuench, 2000, Improving efficiencies in water based separators using mathematical analysis tools Honaker, 1996, Hindered bed classifiers for fine coal cleaning, 59 Peng, 2004, Fluid dynamic modeling of fine particle separation in hindered-settling bed separators by CFD, SME Annual Meeting Feb. 23–25, Denver, Colorado, Preprint 04-33, 1 Peng, 2004, Performance of hindered settling bed density separator in fine coal cleaning circuit, 1 Kohmuench, 2002, A process engineering evaluation of the cross flow separator, Miner. Metall. Process., 19, 43 Nguyentranlam, 2004, Applications of the Reflux Classifier in solid–liquid operations, Int. J. Miner. Process., 73, 83, 10.1016/S0301-7516(03)00065-6 Acrivos, 1979, Enhanced sedimentation in settling tanks with inclined walls, J. Fluid Mech., 3, 435, 10.1017/S0022112079000720 Davis, 1989, Particle classification for dilute suspensions using an inclined settler, Ind. Eng. Chem. Res., 28, 785, 10.1021/ie00090a021 Galvin, 2002, Influence of parallel inclined plates in a liquid fluidized bed system, Chem. Eng. Sci., 57, 1231, 10.1016/S0009-2509(02)00005-2 Galvin, 2005, Performance of the reflux classifier for gravity separation at full scale, Min. Eng., 18, 19, 10.1016/j.mineng.2004.05.023 Doroodchi, 2004, Influence of inclined plates on the expansion behavior of particulate suspensions in a liquid fluidized bed, Chem. Eng. Sci., 59, 3559, 10.1016/j.ces.2004.05.020 Galvin, 2010, Gravity separation of coarse particles using the Reflux Classifier, Min. Eng., 23, 339, 10.1016/j.mineng.2009.09.014 Thompson, 1997, An empirical description for the classification in an inclined counter-flow settler, Min. Eng., 10, 97, 10.1016/S0892-6875(96)00134-3 Nelson, 1997, Autogenous dense medium separation using an inclined counterflow settler, Min. Eng., 10, 871, 10.1016/S0892-6875(97)00064-2 Nguyentranlam, 2001, Particle classification in the reflux classifier, Min. Eng., 14, 1081, 10.1016/S0892-6875(01)00113-3 Galvin, 2002, Pilot plant trial of the reflux classifier, Min. Eng., 15, 19, 10.1016/S0892-6875(01)00193-5 Zhou, 2006, Enhanced separation of mineral sands using the Reflux Classifier, Min. Eng., 19, 1573, 10.1016/j.mineng.2006.08.009 Doroodchi, 2006, Particle size classification in a fluidised bed containing parallel inclined plates, Min. Eng., 19, 162, 10.1016/j.mineng.2005.08.001 Galvin, 2009, How to elutriate particles according to their density, Chem. Eng. Sci., 64, 2003, 10.1016/j.ces.2009.01.031 Galvin, 2010, Application of closely spaced inclined channels in gravity separation of fine particles, Min. Eng., 23, 326, 10.1016/j.mineng.2009.09.015 Galvin, 2012, Desliming of dense minerals in fluidized beds, Min. Eng., 39, 9, 10.1016/j.mineng.2012.06.013 Galvin, 2010, Gravity separation of coal in the reflux classifier — new mechanisms for suppressing the effects of particle size, Int. J. Coal Prep. Util., 30, 130, 10.1080/19392699.2010.497094 Iveson, 2014, Gravity separation and desliming of fine coal: pilot-plant study using reflux classifiers in series, Int. J. Coal Prep. Util., 34, 239, 10.1080/19392699.2013.873796 Galvin, 2012, Development of the reflux classifier, 159 Li, 2014, Recovery and concentration of buoyant cenospheres using an Inverted Reflux Classifier, Fuel Process. Technol., 123, 127, 10.1016/j.fuproc.2014.01.043 Boycott, 1920, Sedimentation of blood corpuscles, Nature, 104, 532, 10.1038/104532b0 Hunter, 2014, The role of viscosity in the density fractionation of particles in a laboratory-scale Reflux Classifier, Fuel, 129, 188, 10.1016/j.fuel.2014.03.063 Chadwick, 2008, Iron rules: new ideas in where and how to mine and recover iron examined, 30 Breuer, 1994, Allflux — a successful system for the production of high quality sand, Aufbereitungstechnik, 35, 636 Piennar, 2000, Allflux twin stage hydrosizer testwork on South African hard coals at Middelburg mine to ensure recovery of a PSS export product from the −0.5mm fine coal D. Williams, M.A. Dickson, D. Connelly, Technical Report on Hematite Mineral Resource, Ularring Hematite Project, Macarthur Minerals Limited, 2011, web source: <http://macarthurminerals.com/wp-content/uploads/2011/10/NI43-101-Technical-Report-Hematite-Mineral-Resource-June-29-2012.pdf>. Horn, 2011, Innovative beneficiation of iron ore fines with Allflux® two-stage fluidised bed classifiers and Gaustec® wet high intensity magnetic separators, 437