Fundamental studies of driven and self-propelled rotary tool cutting processes—I. Theoretical investigation

Shaw, 1984 Armarego, 1969 Trent, 1977 Oxley, 1989 Armarego, 1982, Practical implications of classical thin shear zone analyses, 167 Armarego, 1985, Computer based modeling of popular machining operations for forces and power prediction, Ann. CIRP, 34, 65, 10.1016/S0007-8506(07)61725-9 Armarego, 1990, Four plane facet point drills—basic design and cutting model predictions, Ann. CIRP, 39, 41, 10.1016/S0007-8506(07)60999-8 Armarego, 1991, Computerized end-milling force predictions with cutting models allowing for eccentricity and cutter deflections, Ann. CIRP, 40, 25, 10.1016/S0007-8506(07)61926-X Schmidt, 1949, Distribution of heat generated in drilling, Trans. ASME, 71, 245 Smith, 1988, A study of the effect of geometry machining variables on tool temperatures Smith, 1991, Development and predictions of a three dimensional thermal model for orthogonal machining, A7 Shaw, 1952, The rotary cutting tool, Trans. ASME, 74, 1065 Venuvinod, 1965, An investigation to explain and evaluate the performance of a rotary tool Hahn, 1952, The rotary cutting tool, 74, 1065 Venuvinod, 1971, Analysis of rotary cutting tools Venuvinod, 1981, Some investigations in machining with driven rotary tools, Trans. ASME J. Engng Ind., 103, 469, 10.1115/1.3184514 Venkatesh, 1972, Wear and surface finish in face-milling with rotary inserts, 183 Iyer, 1968, Experiments with self-propelled rotary cutting tools, Int. Mach. Tool Des. Res., 2, 945 Venuvirod, 1983, Principle of equivalent obliquity and its application to rotary cutting, Ann. CIRP, 32, 53, 10.1016/S0007-8506(07)63360-5 Venuvirod, 1978, New model of oblique cutting, J. Engng Ind. Trans. ASME, 100, 2 Armarego, 1991, Development of cutting model for simulated orthogonal rotary tool cutting processes, A17 Armarego, 1991, Development of cutting model for simulated oblique rotary tool cutting processes, 3 Karri, 1991, Fundamental studies of rotary tool cutting processes