A survey of structural and multidisciplinary continuum topology optimization: post 2000

Aage N, Lazarov BS (2013) Parallel framework for topology optimization using the method of moving asymptotes. Struct Multidiscip Optim. doi:10.1007/s00158-012-0869-2 Aage N, Poulsen TA, Gersborg-Hansen A, Sigmund O (2008) Topology optimization of large scale stokes flow problems. Struct Multidiscip Optim 35(2):175–180 Aage N, Nobel-Jorgensen M, Andreasen CS, Sigmund O (2013) Interactive topology optimization on hand-held devices. Struct Multidiscip Optim 47(1):1–6 Abdelwahed M, Hassine M (2009) Topological optimization method for a geometric control problem in stokes flow. Appl Numer Math 59(8):1823–1838 Abolbashari MH, Keshavarzmanesh S (2006) On various aspects of application of the evolutionary structural optimization method for 2D and 3D continuum structures. Finite Elem Anal Des 42(6):478–491 Allaire G, Jouve F (2005) A level-set method for vibration and multiple loads in structural optimization. Comput Methods Appl Mech Eng 194(30–33):3269–3290 Allaire G, Jouve F (2006) Coupling the level set method and the topological gradient in structural optimization. In: Bendsøe MP, Olhoff N, Sigmund O (eds) IUTAM symposium on topological design optimization of structures, machines and materials, Springer, solid mechanics and its applications, vol 137, pp 3–12 Allaire G, Jouve F (2008) Minimum stress optimal design with the level set method. Eng Anal Bound Elem 32(11):909–918 Allaire G, Pantz O (2006) Structural optimization with FreeFem++. Struct Multidiscip Optim 32(3):173–181 Allaire G, Jouve F, Toader AM (2002) A level-set method for shape optimization. C R Math 334(12):1125–1130 Allaire G, Jouve F, Toader AM (2004) Structural optimization using sensitivity analysis and a level-set method. J Comput Phys 194(1):363–393 Allaire G, de Gournay F, Jouve F, Toader AM (2005) Structural optimization using topological and shape sensitivity via a level set method. Control Cybern 34(1):59–80 Almeida SRM, Paulino GH, Silva ECN (2009) A simple and effective inverse projection scheme for void distribution control in topology optimization. Struct Multidiscip Optim 39(4):359–371 Amir O, Bendsøe MP, Sigmund O (2009) Approximate reanalysis in topology optimization. Int J Numer Methods Eng 78(12):1474–1491 Amir O, Stolpe M, Sigmund O (2010) Efficient use of iterative solvers in nested topology optimization. Struct Multidiscip Optim 42(1):55–72 Amstutz S, Andrä H (2006) A new algorithm for topology optimization using a level-set method. J Comput Phys 216(2):573–588 Andreassen E, Clausen A, Schevenels M, Lazarov BS, Sigmund O (2011) Efficient topology optimization in MATLAB using 88 lines of code. Struct Multidiscip Optim 43(1):1–16 Ansola R, Canales J, Tarrago JA (2006) An efficient sensitivity computation strategy for the evolutionary structural optimization (ESO) of continuum structures subjected to self-weight loads. Finite Elem Anal Des 42(14–15):1220–1230 Ansola R, Vegueria E, Canales J, Tarrago JA (2007) A simple evolutionary topology optimization procedure for compliant mechanism design. Finite Elem Anal Des 44(1–2):53–62 Ansola R, Vegueria E, Canales J (2010) An element addition strategy for thermally actuated compliant mechanism topology optimization. Eng Comput 27(6):694–711 Ansola R, Vegueria E, Canales J, Alonso C (2012) Evolutionary optimization of compliant mechanisms subjected to non-uniform thermal effects. Finite Elem Anal Des 57:1–14 Balabanov V, Haftka RT (1996) Topology optimization of transport wing internal structure. AIAA J Aircr 33(1):232–233 Belytschko T, Xiao SP, Parimi C (2003) Topology optimization with implicit functions and regularization. Int J Numer Methods Eng 57(8):1177–1196 Bendsøe MP (1989) Optimal shape design as a material distribution problem. Struct Optim 1(4):193–202 Bendsøe MP, Sigmund O (1999) Material interpolation schemes in topology optimization. Arch Appl Mech 69(9–10):635–654 Bendsøe MP, Sigmund O (2003) Topology optimization: theory, methods and applications, 2nd edn. Springer Blank L, Garcke H, Sarbu L, Srisupattarawanit T, Styles V, Voigt A (2010) Phase-field approaches to structural topology optimization. Int Ser Numer Math 160:245–256 Borel P, Harpøth A, Frandsen L, Kristensen M, Shi P, Jensen JS, Sigmund O (2004) Topology optimization and fabrication of photonic crystal structures. Opt Express 12(9):1996–2001 Borel P, Frandsen L, Harpøth A, Kristensen M, Jensen JS, Sigmund O (2005) Topology optimised broadband photonic crystal Y-splitter. Electron Lett 41(2):69–71 Borrvall T (2001) Topology optimization of elastic continua using restriction. Arch Comput Methods Eng 8(4):351–385 Borrvall T, Petersson J (2001a) Large-scale topology optimization in 3D using parallel computing. Comput Methods Appl Mech Eng 190(46–47):6201–6229 Borrvall T, Petersson J (2001b) Topology optimization using regularized intermediate density control. Comput Methods Appl Mech Eng 190(37–38):4911–4928 Borrvall T, Petersson J (2003) Topology optimization of fluids in Stokes flow. Int J Numer Methods Fluids 41(1):77–107 Bourdin B (2001) Filters in topology optimization. Int J Numer Methods Eng 50(9):2143–2158 Bourdin B, Chambolle A (2003) Design-dependent loads in topology optimization. ESAIM: Control Optim Calc Var 9:19–48 Bourdin B, Chambolle A (2006) The phase-field method in optimal design. In: Bendsøe MP, Olhoff N, Sigmund O (eds) IUTAM symposium on topological design optimization of structures, machines and materials, Springer, solid mechanics and its applications, vol 137, pp 207–215 Bruggi M (2008) On an alternative approach to stress constraints relaxation in topology optimization. Struct Multidiscip Optim 36(2):125–141 Bruggi M, Cinquini C (2009) An alternative truly-mixed formulation to solve pressure load pproblem in topology optimization. Comput Methods Appl Mech Eng 198(17–20):1500–1512 Bruggi M, Duysinx P (2012) Topology optimization for minimum weight with compliance and stress constraints. Struct Multidiscip Optim 46:369–384 Bruggi M, Venini P (2008) A mixed FEM approach to stress-constrained topology optimization. Int J Numer Methods Eng 73(12):1693–1714 Bruns TE (2005) A reevaluation of the SIMP method with filtering and an alternative formulation for solid-void topology optimization. Struct Multidiscip Optim 30(6):428–436 Bruns TE (2007) Topology optimization of convection-dominated, steady-state heat transfer problems. Int J Heat Mass Transf 50(15–16):2859–2873 Bruns TE, Tortorelli DA (2001) Topology optimization of non-linear elastic structures and compliant mechanisms. Comput Methods Appl Mech Eng 190(26–27):3443–3459 Bruns TE, Tortorelli DA (2003) An element removal and reintroduction strategy for the topology optimization of structures and compliant mechanisms. Int J Numer Methods Eng 57(10):1413–1430 Bruns TE, Sigmund O, Tortorelli DA (2002) Numerical methods for the topology optimization of structures that exhibit snap-through. Int J Numer Methods Eng 55(10):1215–1237 Bruyneel M, Duysinx P (2001) Topology optimization with self-weight loading: unexpected problems and solutions. In: Bendsøe MP, Olhoff N, Sigmund O (eds) Second max plank workstop on engineering design optimization. Nybork, Denmark, pp 124–127 Bruyneel M, Duysinx P (2005) Note on topology optimization of continuum structures including self-weight. Struct Multidiscip Optim 29(4):245–246 Buhl T (2002) Simultaneous topology optimization of structure and supports. Struct Multidiscip Optim 23:336–346 Buhl T, Pedersen C, Sigmund O (2000) Stiffness design of geometrically nonlinear structures using topology optimization. Struct Multidiscip Optim 19(2):93–104 Bureerat S, Limtragool J (2006) Performance enhancement of evolutionary search for structural topology optimisation. Finite Elem Anal Des 42:547–566 Burger M, Osher SJ (2005) A survey on level set methods for inverse problems and optimal design. Eur J Appl Math 16(2):263–301 Burger M, Stainko R (2006) Phase-field relaxation of topology optimization with local stress constraints. SIAM J Control Optim 45(4):1447–1466 Burger M, Hackl B, Ring W (2004) Incorporating topological derivatives into level set methods. J Comput Phys 194(1):344–362 Challis VJ (2010) A discrete level-set topology optimization code written in Matlab. Struct Multidiscip Optim 41(3):453–464 Challis VJ, Guest JK (2009) Level-set topology optimization of fluids in stokes flow. Int J Numer Methods Eng 79(10):1284–1308 Challis VJ, Roberts AP, Wilkins AH (2008a) Design of three dimensional isotropic microstructures for maximized stiffness and conductivity. Int J Solids Struct 45:4130–4146 Challis VJ, Roberts AP, Wilkins AH (2008b) Fracture resistance via topology optimization. Struct Multidiscip Optim 36:263–271 Challis VJ, Roberts AP, Grotowski JF, Zhang LC, Sercombe TB (2010) Prototypes for bone implant scaffold design via topology optimization and manufactured by solid freeform fabrication. Adv Eng Mater 12:1106–1110 Challis VJ, Guest JK, Grotowski JF, Roberts AP (2012) Computationally generated cross-property bounds for stiffness and fluid permeability using topology optimization. Int J Solids Struct 29:3397–3408 Chen BC, Kikuchi N (2001) Topology optimization with design-dependent loads. Finite Elem Anal Des 37(1):57–70 Chen LQ (2002) Phase-field models for microstructure evolution. Annu Rev Mater Res 32(32):113–140 Chen S, Chen W (2011) A new level-set based appraoch to shape and topology optimization under geometric uncertainty. Struct Multidiscip Optim 44(1):1–18 Chen S, Chen W, Lee S (2010a) Level set based robust shape and topology optimization under random field uncertainties. Struct Multidiscip Optim 41(4):507–524 Chen Y, Zhou S, Li Q (2009) Computational design for multifunctional microstructural composites. Int J Mod Phys B 23:1345–1351 Chen Y, Zhou S, Li Q (2010b) Multiobjective topology optimization for finite periodic structures. Comput Struct 88:806–811 Chen Y, Cadman J, Zhou S, Li Q (2011a) Computer-aided design and fabrication of bio-mimetic materials and scaffold micro-structures. Adv Mater Res 213:628–632 Chen Y, Schellekens M, Zhou S, Cadman J, Li W, Appleyard R, Li Q (2011b) Design optimization of scaffold microstructures using wall shear stress criterion towards regulated flow-induced erosion. J Biomech Eng 133:081008–1 Chen Y, Zhou S, Li Q (2011c) Microstructure design of biodegradable scaffold and its effect on tissue regeneration. Biomaterials 32:5003–5014 Cho KH, Park JY, Ryu SP, Park JY, Han SY (2011) Reliability- based topology optimization based on bidirectional Evolutionary Structural optimization using multi-objective sensitivity numbers. Int J Automot Technol 12:849–856 Cho S, Choi JY (2005) Efficient topology optimization of thermo-elasticity problems using coupled field adjoint sensitivity analysis method. Finite Elem Anal Des 41(15):1481–1495 Cho S, Jung HS (2003) Design sensitivity analysis and topology optimization of displacement-loaded non-linear structures. Comput Methods Appl Mech Eng 192(22–24):2539–2553 Choi JS, Zhao L, Park GJ, Agrawal S, Kolonay RM (2011) Enhancement of a flapping wing using path and dynamic topology optimization. AIAA J 49(12):2616–2626 Choi SK, Grandhi RV, Canfield RA (2007) Reliability-based structural design. Springer, London Das R, Jones R (2011) Topology optimisation of a bulkhead component used in aircrafts using an evolutionary algorithm. Proc Eng 10:2867–2872 Deaton JD, Grandhi RV (2013a) Stiffening of restrained thermal structures via topology optimization. Struct Multidiscip Optim. doi:10.1007/s00158-013-0934-5 Deaton JD, Grandhi RV (2013b) Topology optimization of thermal structures with stress constraints. In: 54th AIAA/ASME/ASCE/AHS/ ASC structures, structural dynamics and materials conference, Boston van Dijk NP, Maute K, Langelaar, van Keulen F (2013) Level-set methods for structural topology optimization: a review. Struct Multidiscip Optim. doi:10.1007/s00158-013-0912-y Du J, Olhoff N (2004a) Topological optimization of continuum structures with design-dependent surface loading—Part I: new computational approach for 2D problems. Struct Multidiscip Optim 27(3):151–165 Du J, Olhoff N (2004b) Topological optimization of continuum structures with design-dependent surface loading—Part II: algorithm and examples for 3D problems. Struct Multidiscip Optim 27(3):166–177 Du J, Olhoff N (2007a) Minimization of sound radiation from vibrating bi-material structures using topology optimization. Struct Multidiscip Optim 33(4–5):305–321 Du J, Olhoff N (2007b) Topological design of freely vibrating continuum structures for maximum values of simple and multiple eigenfrequencies and frequency gaps. Struct Multidiscip Optim 34(2):91–110 Du J, Olhoff N (2010) Topological design of vibrating structures with respect to optimum sound pressure characteristics in a surrounding acoustic medium. Struct Multidiscip Optim 42(1):43–54 Duan XB, Ma YC, Zhang R (2008a) Optimal shape control of fluid flow using variational level set method. Phys Lett A 372(9):1374–1379 Duan XB, Ma YC, Zhang R (2008b) Shape-topology optimization for Navier-Stokes problem using variational level set method. J Comput Appl Math 222(2):487–499 Duan XB, Ma YC, Zhang R (2008c) Shape-topology optimization of Stokes flow via variational level set method. Appl Math Comput 202(1):200–209 Duhring MB, Jensen JS, Sigmund O (2008) Acoustic design by topology optimization. J Sound Vib 317:557–575 Dunning PD, Kim HA (2013) A new hole insertion method for level set based structural topology optimization. Int J Numer Methods Eng 93:118–134 Dunning PD, Kim HA, Mullineux G (2011) Introducing loading uncertainty into topology optimization. AIAA J 49(4):760–768 Duysinx P, Van Miegroet L, Lemaire E, Bruls O, Bruyneel M (2008) Topology and generalized shape optimisation: why stress constraints are so important?Int J Simul Multidiscip Des Optim 4:253–258 Edwards CS, Kim HA, Budd CJ (2007) An evaluative study on ESO and SIMP for optimising a cantilever tie-beam. Struct Multidiscip Optim 34(5):403–414 Eom YS, Yoo KS, Park JY, Han Y-S (2011) Reliability-based topology optimization using a standard response surface method for three-dimensional structures. Struct Multidiscip Optim 43(2):287–295 Eschenauer HA, Olhoff N (2001) Topology optimization of continuum structures: a review. Appl Mech Rev 54(4):331–390 Evgrafov A (2005) The limits of porous materials in the topology optimization of stokes flows. Appl Math Optim 52(3):263–277 Evgrafov A (2006) Topology optimization of slightly compressed fluids. ZAMM - J Appl Math Mech 86(1):46–62 Evgrafov A, RC J, Maute K, Dunn ML (2008) Large-scale topology optimization using a dual-primal substructing solver. Struct Multidiscip Optim 36(4):329–345 Frei WR, Tortorelli DA, Johnson HT (2005) Topology optimization of a photonic crystal waveguide termination to maximize directional emission. Appl Phys Lett 86(11):111–114 Fuchs M, Shemesh N (2004) Density-based topological design of structures subjected to water pressure using a parametric loading surface. Struct Multidiscip Optim 28(1):11–19 Fuchs MB, Jiny S, Peleg N (2005) The SRV constraint for 0/1 topological design. Struct Multidiscip Optim 30(4):320–328 Gain AL, Paulino GH (2012) Phase-field topology optimization with polygonal elements: a finite volume approach for the evolution equation. Struct Multidiscip Optim 46(3):327–342 Gao T, Zhang W (2009) Topology optimization of multiphase material structures under design dependent pressure loads. Int J Simul Multidiscip Des Optim 3(1):297–306 Gao T, Zhang W (2010) Topology optimization involving thermo-elastic stress loads. Struct Multidiscip Optim 42(5):725–738 Gao T, Zhang WH, Zhu JH, Xu YJ, Bassir DH (2008) Topology optimization of heat conduction problem involving design-dependent load effect. Finite Elem Anal Des 44(14):805–813 Gea HC, Luo J (2001) Topology optimization of structures with geometrical nonlinearity. Comput Struct 79(20–21):1977–1985 Gersborg-Hansen A, Sigmund O, Haber RB (2005) Topology optimization of channel flow problems. Struct Multidiscip Optim 30(3):181–192 Gersborg-Hansen A, Bendsøe MP, Sigmund O (2006) Topology optimization of heat conduction problems using the finite volume method. Struct Multidiscip Optim 31(4):251–259 Gomes A, Suleman A (2008) Topology optimization of a reinforced wing box for enchanced roll maneuvers. AIAA J 46(3):548–556 de Gournay F, Allaire G, Jouve F (2008) Shape and topology optimization of the robust compliance via the level set method. ESAIM: Control Optim Calc Var 14(1):43–70 Guan H, Chen YJ, Loo YC, Xie YM, Steven GP (2003) Bridge topology optimisation with stress, displacement and frequency constraints. Comput Struct 81(3):131–145 Guest JK (2009a) Imposing maximum length scale in topology optimization. Struct Multidiscip Optim 37(5):463–473 Guest JK (2009b) Topology optimization with multiple phase projection. Comput Methods Appl Mech Eng 199(1–4):123–135 Guest JK, Genut LCS (2010) Reducing dimensionality in topology optimization using adaptive design variable fields. Int J Numer Methods Eng 81(8):1019–1045 Guest JK, Igusa T (2008) Structural optimization under uncertain loads and nodal locations. Comput Methods Appl Mech Eng 198:116–124 Guest JK, Prévost JH (2006a) Optimizing multifunctional materials: design of microstructures for maximized stiffness and fluid permeability. Int J Solids Struct 43(22–23):7028–7047 Guest JK, Prévost JH (2006b) Topology optimization of creeping fluid flows using a Darcy-Stokes finite element. Int J Numer Methods Eng 66(3):461–484 Guest JK, Prévost JH (2007) Design of maximum permeability material structures. Comput Methods Appl Mech Eng 196(4–6):1006–1017 Guest JK, Prévost JH, Belytschko T (2004) Achieving minimum length scale in topology optimization using nodal design variables and projection functions. Int J Numer Methods Eng 61(2):238–254 Guest JK, Asadpoure A, Ha SH (2011) Eliminating beta-continuation from Heaviside projection and density filter algorithms. Struct Multidiscip Optim 44(4):443–453 Guilherme CEM, Fonseca JSO (2007) Topology optimization of continuum structures with epsilon-relaxed stress constraints. In: Alves M, da Costa Mattos H (eds) International symposium on solid mechanics, mechanics of solids in Brazil, vol 1. Brazilian Society of Mechanical Sciences in Engineering, pp 239–250 Guo X, Zhang WS, Wang MY, Wei P (2011) Stress-related topology optimization via level set approach. Comput Methods Appl Mech Eng 200(47–48):3439–3452 Ha SH, Cho S (2005) Topological shape optimization of heat conduction problems using level set approach. Numer Heat Transf B Fundam Int J Comput Methodol 48(1):67–88 Ha SH, Cho S (2008) Level set based topological shape optimization of geometrically nonlinear structures using unstructured mesh. Comput Struct 86(13–14):1447–1455 Haber E (2004) A multilevel, level-set method for optimizing eigenvalues in shape optimization. J Comput Phys 198(2):518–534 Halkjaer S, Sigmund O, Jensen JS (2006) Maximizing band gaps in plate structures. Struct Multidiscip Optim 32(4):263–275 Hammer VB, Olhoff N (2000) Topology optimization of continuum structures subjected to pressure loading. Struct Multidiscip Optim 19(2):85–92 Harzheim L, Graf G (2002) Topshape: an attempt to create design proposals including manufacturing constraints. Int J Veh Des 28(4):389–409 Harzheim L, Graf G (2006) A review of optimization of cast parts using topology optimization: II - Topology optimization with manufacturing constraints. Struct Multidiscip Optim 31:388–399 He L, Kao CY, Osher SJ (2007) Incorporating topological derivatives into shape derivatives based level set methods. J Comput Phys 225(1):891–909 Hollister SJ (2005) Porous scaffold design for tissue engineering. Nat Mater 4:518–524 Holmberg E, Torstenfelt B, Klarbring A (2013) Stress constrained topology optimization. Struct Multidiscip Optim. doi:10.1007/s00158-012-0880-7 Huang X, Xie YM (2007a) Bidirectional evolutionary topology optimization for structures with geometrical and material nonlinearities. AIAA J 45(1):308–313 Huang X, Xie YM (2007b) Convergent and mesh-independent solutions for the bi-directional evolutionary structural optimization method. Finite Elem Anal Des 43(14):1039–1049 Huang X, Xie YM (2008a) A new look at ESO and BESO optimization methods. Struct Multidiscip Optim 35(1):89–92 Huang X, Xie YM (2008b) Topology optimization of nonlinear structures under displacement loading. Eng Struct 30(7):2057–2068 Huang X, Xie YM (2009) Bi-directional evolutionary topology optimization of continuum structures with one or multiple materials. Comput Mech 43(3):393–401 Huang X, Xie YM (2010a) A further review of ESO type methods for topology optimization. Struct Multidiscip Optim 41(5):671–683 Huang X, Xie YM (2010b) Evolutionary topology optimization of continuum structures: methods & applications. Wiley, New York Huang X, Xie YM (2010c) Evolutionary topology optimization of continuum structures with an additional displacement constraint. Struct Multidiscip Optim 40(1–6):409–416 Huang X, Xie YM (2011) Evolutionary topology optimization of continuum structures including design-dependent self-weight loads. Finite Elem Anal Des 47(8):942–948 Huang X, Xie YM, Burry MC (2006) A new algorithm for bi-directional evolutionary structural optimization. JSME Int J Ser C 4(4):1091–1099 Huang X, Xie YM, Lu G (2007) Topology optimization of energy-absorbing structures. Int J Crashworthiness 12(6):663–675 Huang X, Zuo ZH, Xie YM (2010) Evolutionary topological optimization of vibrating continuum structures for natural frequencies. Comput Struct 88(5–6):357–364 Huang X, Xie YM, Jia B, Li Q, Zhou SW (2012) Evolutionary topology optimization of periodic composites for extremal magnetic permeability and electrical permittivity. Struct Multidiscip Optim 46(3):385–398 Huang X, Zhou S, Xie YM, Li Q (2013) Topology optimization of microstructures of cellular materials and composites for macrostructures. Comput Mater Sci 67:397–407 James KA, Martins JR (2012) An isoparametric approach to level set topology optimization using a body-fitted finite-element model. Comput Struct 90–91:97–106 Jang GW, Jeong JH, Kim YY, Sheen D, Park C, Kim MN (2003) Checkerboard-free topology optimization using non-conforming finite elements. Int J Numer Methods Eng 57(12):1717–1735 Jang HH, Lee HA, Lee JY, Park GJ (2012) Dynamic response topology optimization in the time domain using equivalent static loads. AIAA J 50(1):226–234 Jensen JS, Pedersen NL (2006) On maximal eigenfrequency separation in two-material structures: the 1D and 2D scalar cases. J Sound Vib 289(4–5):667–686 Jensen JS, Sigmund O (2004) Systematic design of photonic crystal structures using topology optimization: low-loss waveguide bends. Appl Phys Lett 84(12):2022–2024 Jensen JS, Sigmund O (2005) Topology optimization of photonic crystal structures: a high-bandwidth low-loss T-junction waveguide. J Opt Soc Am B 22(6):1191–1198 Jensen JS, Sigmund O (2011) Topology optimization of nano-photonics. Laser Photonics Rev 5(2):308–312 Jog CS (2002) Topology design of structures subjected to periodic loading. J Sound Vib 253(3):687–709 Jung D, Gea HC (2004) Topology optimization of nonlinear structures. Finite Elem Anal Des 40(11):1417–1427 Jung HS, Cho S (2004) Reliability-based topology optimization of geometrically nonlinear structures with loading and material uncertainties. Finite Elem Anal Des 43(3):311–331 Kang H, Lin CY, Hollister SJ (2010) Topology optimization of three dimensional tissue engineering scaffold architectures for prescribed bulk modulus and diffusivity. Struct Multidiscip Optim 42:633–644 Kang JN, Kim CI, Wang SM (2004) Reliability-based topology optimization for electromagnetic systems. COMPEL—Int J Comput Math Electr Electron Eng 23(3):715–723 Kang Z, Luo Y (2009) Non-probabilistic reliability-based topology optimization of geometrically nonlinear structures using convex models. Comput Methods Appl Mech Eng 198(41–44):3228–3238 Kawamoto A (2009) Stabilization of geometrically nonlinear topology optimization by the Levenberg-Marquardt method. Struct Multidiscip Optim 37(4):429–433 Kawamoto A, Matsumori T, Yamasaki S, Nomura T, Kondoh T, Nishiwaki S (2011) Heaviside projection based topology optimization by a PDE-filtered scalar function. Struct Multidiscip Optim 44(1):19–24 Kemmler R, Lipka A, Ramm E (2005) Large deformations and stability in topology optimization. Struct Multidiscip Optim 30(6):459–476 Kharmanda G, Olhoff N, Mohamed A, Lemaire M (2004) Reliability-based topology optimization. Struct Multidiscip Optim 26(5):295–307 Kim C, Wang S, Hwang I, Lee J (2007a) Application of reliability-based topology optimization for microelectromechanical systems. AIAA J 45(12):2926–2934 Kim H, Garcia MJ, Querin OM, Steven GP, Xie YM (2000a) Introduction of fixed grid in evolutionary structural optimisation. Eng Comput 17(4):427–439 Kim H, Querin OM, Steven GP, Xie YM (2000b) A method for varying the number of cavities in an optimized topology using evolutionary structural optimization. Struct Multidiscip Optim 19(2):140–147 Kim H, Querin OM, Steven GP, Xie YM (2002a) Determination of an optimal topology with a predefined number of cavities. AIAA J 40(4):739–744 Kim H, Querin OM, Steven GP, Xie YM (2002b) Improving efficiency of evolutionary structural optimization by implementing fixed grid mesh. Struct Multidiscip Optim 24(6):441–448 Kim IY, Kwak BM (2002) Design space optimization using a numerical design continuation method. Int J Numer Methods Eng 53(8):1979–2002 Kim JE, Jang GW, Kim YY (2003) Adaptive multiscale wavelet-Galerkin analysis for plane elasticity problems and its applications to multiscale topology design optimization. Int J Numer Methods Eng 40(23):6473–6496 Kim MG, Ha SH, Cho S (2009) Level set-based topological shape optimization of nonlinear heat conduction problems using topological derivatives. Mech Based Des Struct Mach 37(4):550–582 Kim SR, Park JY, Lee WG, Yu JS, HS Y (2007b) Reliability-based topology optimization based on evolutionary structural optimization. Int J Mech Syst Sci Eng 1(3):135–139 Kim TS, Kim JE, Kim YY (2004) Parallelized structural topology optimization for eigenvalue problems. Int J Solids Struct 41(9–10):2623–2641 Kim WY, Grandhi RV, Haney MA (2006) Multiobjective evolutionary structural optimization using combined static/dynamic control parameters. AIAA J 44(4):794–802 Kim YY, Yoon GH (2000) Multi-resolution multi-scale topology optimization—a new paradigm. Int J Solids Struct 37(3):5529–5559 Klarbring A, Strömberg N (2012) A note on the min-max formulation of stiffness optimization including non-zero prescribed displacements. Struct Multidiscip Optim 45(1):147–149 Klarbring A, Strömberg N (2013) Topology optimization of hyperelastic bodies including non-zero prescribed displacements. Struct Multidiscip Optim 47(1):37–48 Kobayashi MH (2010) On a biologically inspired topology optimization method. Commun Nonlinear Sci Numer Simul 15(3):787–802 Kobayashi MH, Pedro HTC, Coimbra CFM, da Silva AK (2009a) Formal evolutionary development of low-entropy dendritic thermal systems. J Thermophys Heat Transf 23(4):822–827 Kobayashi MH, Pedro HTC, Kolonay RM, Reich GW (2009b) On a cellular division method for aircraft structural design. Aeronaut J 113(1150):821–831 Kolonay RM, Kobayashi MH (2010) Topology, shape, and sizing optimization of aircraft lifting surfaces using a cellular division approach. In: 13th AIAA/ISSMO multidisciplinary analysis and optimization conference. AIAA/ISSMO, Fort Worth Kreissl S, Pingen G, Evgrafov A, Maute K (2010) Topology optimization of flexible micro-fluidic devices. Struct Multidiscip Optim 42(4):495–516 Kreissl S, Pingen G, Maute K (2011) Topology optimization for unsteady flow. Int J Numer Methods Eng 87:1229–1253 Krog L, Tucker A, Kemp M (2004) Topology optimization of aircraft wing box ribs. In: 10th AIAA/ISSMO multidisciplinary analysis and optimization conference. AIAA/ISSMO, Albany de Kruijf N, Zhou S, Li Q, Mai YW (2007) Topological design of structures and composite materials with multiobjectives. Int J Solids Struct 44:7092–7109 Kwak J, Cho S (2005) Topological shape optimization of geometrically nonlinear structures using level set method. Comput Struct 83(27):2257–2268 Larsen AA, Laksafoss B, Jensen JS, Sigmund O (2009) Topological material layout in plate for vibration suppression and wave propagation control. Struct Multidiscip Optim 37(6):585–594 Lazarov BS, Sigmund O (2011) Filters in topology optimization based on Helmholtz-type differential equations. Int J Numer Methods Eng 86(6):765–781 Lazarov BS, Schevenels M, Sigmund O (2012) Topology optimization considering material and geometric uncertainties using stochastic collocation methods. Struct Multidiscip Optim 46:597–612 Le C, Norato J, Bruns TE, Ha C, Tortorelli DA (2010) Stress-based topology optimization for continua. Struct Multidiscip Optim 41(4):605–620 Lee E, Martins JRRA (2012) Structural topology optimization with design-dependent pressure loads. Comput Methods Appl Mech Eng 233–236:40–48 Lee E, James KA, Martins JRRA (2012) Stress-constrained topology optimization with design-dependent loading. Struct Multidiscip Optim 46(5):647–661 Lee HA, Park GJ (2012) Topology optimization for structures with nonlinear behavior using the equivalent static loads method. J Mech Des 134: 031004 Leiva JP, Watson B, Iku K (2004) An analytical directional growth topology parameterization to enforce manufacturing requirements. In: 45th AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics & materials conference. AIAA/ASME/ASCE/AHS/ASC, Palm Springs Leon DM, Souza CE, Fonseca JSO, Silva RGA (2012) Aeroelastic tailoring using fiber orientation and topology optimization. Struct Multidiscip Optim 46(5):663–677. doi:10.1007/s00158-012-0790-8 Lewinski T, Rozvany GIN (1994) Extended exact solutions for least-weight truss layouts. Part II: unsymmetric cantilevers. Int J Mech Sci 36:375–398 Lewinski T, Rozvany GIN (2007) Exact analytical solutions for some popular benchmark problems in topology optimization II: three-sided polygonal supports. Struct Multidiscip Optim 33:337–349 Lewinski T, Rozvany GIN (2008a) Analytical benchmarks for topological optimization IV: square-shaped line support. Struct Multidiscip Optim 36:143–158 Lewinski T, Rozvany GIN (2008b) Exact analytical solutions for some popular benchmark problems in topology optimization III: L-shaped domains. Struct Multidiscip Optim 35:165–174 Li Q, Steven GP, Querin OM, Xie YM (2000) Structural topology design with multiple thermal criteria. Eng Comput 17(6):715–734 Li Q, Steven GP, Xie YM (2001a) A simple checkerboard suppression algorithm for evolutionary structural optimization. Struct Multidiscip Optim 22(3):230–239 Li Q, Steven GP, Xie YM (2001b) Evolutionary structural optimization for connection topology design of multi-component systems. Eng Comput 18(3):460–479 Li Q, Steven GP, Xie YM (2001c) Thermoelastic topology optimization for problems with varying temperature fields. J Therm Stress 24(4):347–366 Li Q, Steven GP, Xie YM, Querin OM (2004) Evolutionary topology optimization for temperature reduction of heat conducting fields. Int J Heat Mass Transf 47(23):5071–5083 Liang QQ, Steven GP (2002) A performance-based optimization method for topology design of continuum structures with mean compliance. Comput Methods Appl Mech Eng 191(13–14):1471–1489 Liang QQ, Xie YM, Steven GP (2000a) Optimal topology selection of continuum structures with displacement constraints. Comput Struct 77(6):635–644 Liang QQ, Xie YM, Steven GP (2000b) Topology optimization of strut-and-tie models in reinforced concrete structures using an evolutionary procedure. ACI Struct J 97(2):322–332 Liang QQ, Xie YM, Steven GP (2001) A performance index for topology and shape optimization of plate bending problems with displacement constraints. Struct Multidiscip Optim 21(5):393–399 Lin CY, Kikuchi N, Hollister SJ (2004) A novel method for biomaterial scaffold internal architecture design to match bone elastic properties with desired porosity. J Biomech 37:623–636 Liu X, Yi WJ (2010) Michell-like 2D layouts generated by genetic ESO. Struct Multidiscip Optim 42(1):111–123 Liu X, Yi MJ, Li QS, Shen PS (2008a) Genetic evolutionary structural optimization. J Constr Steel Res 64(3):305–311 Liu Y, Jin F, Li Q, Zhou S (2008b) A fixed-grid bidirectional evolutionary structural optimization method and its applications in tunnel engineering. Int J Numer Methods Eng 73:1788–1810 Lógó J, Ghaemi M, Rad MM (2009) Optimal topologies in case of probabilistic loading: the influence of load correlation. Mech Based Des Struct Mach 37:327–348 Luo J, Luo Z, Chen L, Tong L, Wang MY (2008a) A semi-implicit level set method for structural shape and topology optimization. J Comput Phys 227(11):5561–5581 Luo J, Luo Z, Chen S, Tong L, Wang MY (2008b) A new level set method for systematic design of hinge-free compliant mechanisms. Comput Methods Appl Mech Eng 198(2):318–331 Luo Y, Kang Z (2012) Topology optimization of continuum structures with Drucker-Prager yield stress constraints. Comput Struct 90–91(90–91):65–75 Luo Y, Wang MY, Kang Z (2013) An enhanced aggregation method for topology optimization with local stress constraints. Comput Methods Appl Mech Eng 254:31–41 Luo Z, Tong L (2008) A level set method for shape and topology optimization of large-displacement compliant mechanisms. Int J Numer Methods Eng 76(6):862–892 Luo Z, Tong L, Wang MY, Wang S (2007) Shape and topology optimization of compliant mechanisms using a parameterization level set method. J Comput Phys 227(1):680–705 Luo Z, Wang MY, Wang S, Wei P (2008c) A level set-based parameterization method for structural shape and topology optimization. Int J Numer Methods Eng 76(1):1–26 Luo Z, Tong L, Kang Z (2009a) A level set method for structural shape and topology optimization using radial basis functions. Comput Struct 87(7–8):425–434 Luo Z, Tong L, Luo J, Wei P, Wang MY (2009b) Design of piezoelectric actuators using a multiphase level set method of piecewise constants. J Comput Phys 228(7):2643–2659 Luo Z, Tong L, Ma H (2009c) Shape and topology optimization for electrothermomechanical microactuators using level set methods. J Comput Phys 228(9):3173–3181 Luo Z, Zhang N, Gao W, Ma H (2012) Structural shape and topology optimization using a meshless Galerkin level set method. Int J Numer Methods Eng 90(3):369–389 Luo ZJ, Yang J, Chen L (2006) A new procedure for aerodynamic missile design using topological optimization of continuum structures. Aerosp Sci Technol 10(5):364–373 Macfadden GB (2002) Phase-field models of solidification. AMS Contemp Math 306:107–145 Maeda Y, Nishiwaki S, Izui K, Yoshimura M, Matsui K, Terada K (2006) Structural topology optimization of vibrating structures with specified eigenfrequencies and eigenmode shapes. Int J Numer Methods Eng 67(5):597–628 Mahdavi A, Balaji R, Frecker M, Mockensturm EM (2006) Topology optimization of 2D continua for minimum compliance using parallel computing. Struct Multidiscip Optim 32(2):121–132 Martinez J (2005) A note on the theoretical convergence properties of the SIMP method. Struct Multidiscip Optim 29(4):319–232 Matsui K, Terada K (2004) Continuous approximation of material distribution for topology optimization. Int J Numer Methods Eng 59:1925–1944 Maute K, Allen M (2004) Conceptual design of aeroelastic structures by topology optimization. Struct Multidiscip Optim 27(1–2):27–42 Maute K, Frangopol DM (2003) Reliability-based design of MEMS mechanisms by topology optimization. Comput Struct 81(8–11):813–824 Maute K, Reich GW (2006) Integrated multidisciplinary topology optimization approach to adaptive wing design. AIAA J Aircr 43(1):253–263 Naceur H, Guo YQ, Batoz JL (2004) Blank optimization in sheet metal forming using an evolutionary algorithm. J Mater Proc Technol 151(1–3):183–191 Nakamura A, Lindenmeyer A, Aizawa K (1986) Some systems for map generation. The Book of L, Springer Nandy AK, Jog CS (2012) Optimization of vibrating structures to reduce radiated noise. Struct Multidiscip Optim 45(5):717–728 Navarrina F, Muinos I, Colominas I, Casteleiro M (2005) Topology optimization of structures: a minimum weight approach with stress constraints. Adv Eng Softw 36(9):599–606 Nguyen TH, Paulino GH, Song J, Le CH (2010) A computational paradigm for multiresolution topology optimization (MTOP). Struct Multidiscip Optim 41(4):525–539 Nguyen TH, Song J, Paulino GH (2011) Single-loop system reliability-based topology optimization considering statistical dependence between limit states. Struct Multidiscip Optim 44(5):593–611 Nguyen TH, Paulino GH, Song J, Le CH (2012) Improving multiresolution topology optimization via multiple discretizations. Int J Numer Methods Eng 92(6):507–530 Niu F, Xu S, Cheng G (2011) A general formulation of structural topology optimization for maximizing structural stiffness. Struct Multidiscip Optim 43:561–572 Norato J, Bendsøe MP, Haber RB, Tortorelli DA (2007) A topological derivative method for topology optimization. Struct Multidiscip Optim 33(4–5):375–386 Oded A, Sigmund O (2011) On reducing computational effort in topology optimization: how far can we go?Struct Multidiscip Optim 44(1):25–29 Oleson LH, Okkels F, Bruus H (2006) A high-level programming language of topology optimization applied to steady-state Navier-Stokes flow. Int J Numer Methods Eng 7(7):975–1001 Olhoff N, Du J (2006) Topology optimization of vibrating bi-material structures using topology optimization. In: Bendsøe MP, Olhoff N, Sigmund O (eds) IUTAM symposium on topological design optimization of structures, machines and materials, Springer, Bendsøe MP, Olhoff N, Sigmund O, vol 137, pp 43–52 Osher SJ, Fedkiw R (2002) Level set methods and dynamic implicit surfaces, applied mathematical sciences, vol 153. Springer, New York Osher SJ, Santosa F (2001) Level set methods for optimization problems involving geometry and constraints I. Frequencies of a two-density inhomogenous drum. J Comput Phys 171(1):272–288 Osher SJ, Sethian JA (1988) Fronts propagating with curvature dependent speed: algorithms based on the Hamilton-Jacobi formulation. J Comput Phys 79(1):12–49 París J, Navarrina F, Colominas I, Casteleiro M (2007) Global versus local statement of stress constraints in topology optimization. In: Alves M, da Costa Mattos H (eds) Computer aided optimum design of structures. WIT Press, Southampton, pp 13–23 París J, Navarrina F, Colominas I, Casteleiro M (2009) Topology optimization of continuum structures with local and global stress constraints. Struct Multidiscip Optim 39(4):419–437 París J, Navarrina F, Colominas I, Casteleiro M (2010a) Block aggregation of stress constraints in topology optimization of structures. Adv Eng Softw 41(3):433–441 París J, Navarrina F, Colominas I, Casteleiro M (2010b) Improvements in the treatment of stress constraints in structural topology optimization problems. J Comput Appl Math 234(7):2231–2238 París J, Navarrina F, Colominas I, Casteleiro M (2010c) Stress constraints sensitivity analysis in structural topology optimization. Comput Methods Appl Mech Eng 199(33–36):2110–2122 Park I, Grandhi RV (2011) Quantifying multiple types of uncertainty in physics-based simulation using Bayesian model averaging. AIAA J 49:1038–1045 Patil S, Zhou S, Li Q (2008) Design of periodic microstructural materials by using evolutionary structural optimization method. Adv Mater Res 32:279–283 Paulino GH, Le CH (2009) A modified Q4/Q4 element for topology optimization. Struct Multidiscip Optim 37(3):255–264 Pedersen CBW, Allinger P (2006) Industrial implementation and applications of topology optimization and future needs. In: Bendsøe MP, Olhoff N, Sigmund O (eds) IUTAM symposium on topological design optimization of structures, machines and materials, Springer, Bendsøe MP, Olhoff N, Sigmund O, vol 137, pp 229–238 Pedersen CBW, Buhl T, Sigmund O (2001) Topology synthesis of large-displacement compliant mechanisms. Int J Numer Methods Eng 50(12):2683–2705 Pedersen NL (2000) Maximization of eigenvalues using topology optimization. Struct Multidiscip Optim 20(1):2–11 Pedersen P, Pedersen N (2011) Design objectives with non-zero prescribed support displacements. Struct Multidiscip Optim 43(2):205–214 Pedersen P, Pedersen NL (2010) Strength optimized designs of thermoelastic structures. Struct Multidiscip Optim 42(5):681–691 Pedersen P, Pedersen NL (2012) Interpolation/penalization applied for strength design of 3D thermoelastic structures. Struct Multidiscip Optim 42(6):773–786 Pedro HTC, Kobayashi MH (2011) On a cellular division method for topology optimization. Int J Numer Methods Eng 88(11):1175–1197 Pedro HTC, Kobayashi MH, Coimbra CFM, da Silva AK (2008) Effectiveness of complex design through an evolutionary approach. J Thermophys Heat Transf 22(1):115–118 Pereira JT, Fancello EA, Barcellos CS (2004) Topology optimization of continuum structures with material failure constraints. Struct Multidiscip Optim 26(1–2):50–66 Pingen G, Evgrafov A, Maute K (2007) Topology optimization of flow domains using the lattice Boltzmann method. Struct Multidiscip Optim 34(6):507–524 Pingen G, Waidmann M, Evgrafov A, Maute K (2010) A parameteric level-set approach for topology optimization of flow domains. Struct Multidiscip Optim 41(1):117–131 Pomezanski V, Querin OM, Rozvany GIN (2005) CO-SIMP: extended SIMP algorithm with direct corner contact control. Struct Multidiscip Optim 30(2):164–168 Poulsen TA (2002) A simple scheme to prevent checkerboard patterns and one-node connected hinges in topology optimization. Struct Multidiscip Optim 24(5):396–399 Poulsen TA (2003) A new scheme for imposing a minimum length scale in topology optimization. Int J Numer Methods Eng 57(6):741–760 Proos KA, Steven GP, Querin OM, Xie YM (2001a) Multicriterion evolutionary structural optimization using the weighting and the global criterion methods. AIAA J 39(10):2006–2012 Proos KA, Steven GP, Querin OM, Xie YM (2001b) Stiffness and inertia multicriteria evolutionary structural optimisation. Eng Comput 18(7):1031–1054 Qian X, Sigmund O (2013) Topological design of electromechanical actuators with robustness toward over- and under-etching. Comput Methods Appl Mech Eng 253:237–251 Qian Z, Ananthasuresh GK (2004) Optimal embedding of rigid objects in the topology design of structures. Mech Based Des Struct Mach 32(2):165–193 Qiu GY, Li XS (2010) A note on the derivation of global stress constraints. Struct Multidiscip Optim 40:625–628 Querin OM, Steven GP, Xie YM (1998) Evolutionary structural optimisation (ESO) using a bidirectional algorithm. Eng Comput 15(8):1031–1048 Querin OM, Steven GP, Xie YM (2000a) Evolutionary structural optimisation using an additive algorithm. Finite Elem Anal Des 34(3–4):291–308 Querin OM, Young V, Steven GP, Xie YM (2000b) Computational efficiency and validation of bi-directional evolutionary structural optimisation. Comput Methods Appl Mech Eng 189(2):559–573 Rahmatalla S, Swan CC (2003) Continuum topology optimization of buckling-sensitive structures. AIAA J 41(6):1180–1189 Rahmatalla SF, Swan CC (2004) A Q4/Q4 continuum structural topology optimization implementation. Struct Multidiscip Optim 27(1–2):130–135 Ren G, Smith JV, Tang JW, Xie YM (2005) Underground excavation shape optimization using an evolutionary procedure. Comput Geotech 32(2):122–132 Rietz A (2001) Sufficiency of a finite exponent in SIMP (power law) methods. Struct Multidiscip Optim 21(2):159–163 Riley ME, Grandhi RV (2011) Quantification of model-form and predictive uncertainty for multi-physics simulations. Comput Struct 89:1206–1213 Rong JH, Xie YM, Yang XY (2001) An improved method for evolutionary structural optimisation against buckling. Comput Struct 79(3):253–263 Rozvany GIN (2001a) Aims, scope, methods, history and unified terminology of computer-aided topology optimization in structural mechanics. Struct Multidiscip Optim 21(2):90–108 Rozvany GIN (2001b) On design-dependent constraints and singular topologies. Struct Multidiscip Optim 21(2):164–172 Rozvany GIN (2001c) Stress ratio and compliance based methods in topology optimization—a critical review. Struct Multidiscip Optim 21(2):109–119 Rozvany GIN (2009a) A critical review of established methods of structural topology optimization. Struct Multidiscip Optim 37(3):217–237 Rozvany GIN (2009b) Traditional vs. extended optimality in topology optimization. Struct Multidiscip Optim 37:319–323 Rozvany GIN, Maute K (2011) Analytical and numerical solutions for a reliability-based benchmark example. Struct Multidiscip Optim 43(6):745–753 Rozvany GIN, Querin OM (2002) Combining ESO with rigorous optimality criteria. Int J Veh Des 28(4):294–299 Rozvany GIN, Sokol T (2012) Exact truss topology optimization: allowance for support costs and different permissible stresses in tension and compression—extensions of a classical solution by Michell. Struct Multidiscip Optim 45:367–376 Rozvany GIN, Zhou M, Birker T (1992) Generalized shape optimization without homogenization. Struct Optim 4(3):250–252 Rozvany GIN, Querin OM, Gaspar Z, Pomezanski V (2002) Extended optimality in topology design. Struct Multidiscip Optim 24:257–261 Rozvany GIN, Querin OM, Logo J, Pomezanski V (2006) Exact analytical theory of topology optimization with some pre- existing member or elements. Struct Multidiscip Optim 31:373–377 Ryu JC, Park FC, Kim YY (2012) Mobile robot path planning algorithm by equivalent conduction heat flow topology optimization. Struct Multidiscip Optim 45(5):703–715 Schevenels M, Lazarov BS, Sigmund O (2011) Robust topology optimization accounting for spatially varying manufacturing errors. Comput Methods Appl Mech Eng 200:3613–3627 Schramm U, Zhou M (2006) Recent developments in the commercial implementation of topology optimization. In: Bendsøe MP, Olhoff N, Sigmund O (eds) IUTAM symposium on topological design optimization of structures, machines and materials, Springer, Bendsøe, MP, Olhoff, N, Sigmund O, vol 137, pp 239–248 Schury F, Stingl M, Wein F (2012) Slope constrained material design. Struct Multidiscip Optim 46(6):813–827 Schwarz S, Maute K, Ramm E (2001) Topology and shape optimization for elastoplastic structural response. Comput Methods Appl Mech Eng 190:2135–2155 Sethian JA (1999) Level set methods and fast marching methods: evolving interfaces in computational geometry, fluid mechanics, computer vision and materials science. Cambridge monographs on applied and computer mechanics, 2nd edn, vol 3. Cambridge University Press, Cambridge Sethian JA, Wiegmann A (2000) Structural boundary design via level set and immersed interface methods. J Comput Phys 163(2):489–528 Sherif K, Witteveen W, Puchner K, Irschik H (2010) Efficient topology optimization of large dynamic finite element systems using fatigue. AIAA J 48(7):1339–1347 Sigmund O (2001a) Design of multiphysics actuators using topology optimization—Part I: one-material structures. Comput Methods Appl Mech Eng 190(49–50):6577–6604 Sigmund O (2001b) Design of multiphysics actuators using topology optimization—Part II: two-material structures. Comput Methods Appl Mech Eng 190(49–50):6605–6627 Sigmund O (2007) Morphology-based black and white filters for topology optimization. Struct Multidiscip Optim 33(4–5):401–424 Sigmund O (2009) Manufacturing tolerant topology optimization. Acta Mech Sinica 25(2):227–239 Sigmund O, Clausen PM (2007) Topology optimization using a mixed formulation: an alternative way to solve pressure load problems. Comput Methods Appl Mech Eng 196(13–16):1874–1889 Sigmund O, Jensen JS (2003) System design of phononic band-gap materials and structures by topology optimization. Philos Trans R Soc Lond A 361(1806):1001–1019 Sigmund O, Maute K (2012) Sensitivity filtering from a continuum mechanics perspective. Struct Multidiscip Optim 46(4):471–475 Sigmund O, Petersson J (1998) Numerical instabilities in topology optimization: a survey on procedures dealing with checkerboards, mesh-dependencies, and local minima. Struct Optim 16(1):68–75 Silva M, Tortorelli DA, Norato J, Ha C, Bae HR (2010) Component and system reliability-based topology optimization using a single loop method. Struct Multidiscip Optim 41(1):87–106 Sokol T, Rozvany GIN (2012) New analytical benchmark for topology optimization and their implications. Part I: bi-symmetric trusses with two point loads between supports. Struct Multidiscip Optim 46:477–486 Stainko R (2006) An adaptive multilevel approach to the minimal compliance problem in topology optimization. Commun Numer Methods Eng 22(2):109–118 Stainko R, Sigmund O (2007) Tailoring dispersion properties of photonic crystal waveguide by topology optimization. Waves Random Complex Media 17(4):477–489 Stanford B, Beran P (2011) Conceptual design of compliant mechanisms for flapping wing with topology optimization. AIAA J 49(4):855–867 Stanford B, Ifju P (2009a) Aeroelastic topology optimization of membrane structures for micro air vehicles. Struct Multidiscip Optim 38:301–316 Stanford B, Ifju P (2009b) Multi-objective topology optimization of wing skeletons for aeroelastic membrane structures. Int J Micro Air Veh 1(1):51–69 Stanford B, Beran P, Kobayashi MH (2012a) Aeroelastic optimization of flapping wing venation: a cellular division approach. AIAA J 50(4):938–951 Stanford B, Beran P, Kobayashi MH (2012b) Simultaneous topology optimization of membrane wings and their compliant flapping mechanisms. In: AIAA structures, structural dynamics, and materials conference. AIAA, Honolulu Stegmann J, Lund E (2005) Nonlinear topology optimization of layered shell structures. Struct Multidiscip Optim 29(5):349–360 Steven GP, Li Q, Xie YM (2000) Evolutionary topology and shape design for general physical field problems. Comput Mech 26(2):129–139 Stolpe M, Svanberg K (2001a) An alternative interpolation scheme for minimum compliance topology optimization. Struct Multidiscip Optim 22(2):116–124 Stolpe M, Svanberg K (2001b) On the trajectories of penalization methods for topology optimization. Struct Multidiscip Optim 21(2):128–139 Stump FV, Silva ECN, Paulino GH (2007) Optimization of material distribution in functionally graded structures with stress constraints. Commun Numer Methods Eng 23(6):535–551 Sturm S, Zhou S, Mai YW, Li Q (2010) On stiffness of scaffold for bone tissue engineering—a numerical study. J Biomech 43:1738–1744 Sutradhar A, Paulino GH, Miller MJ, Nguyen TH (2010) Topological optimization for designing patient-specific large craniofacial segmental bone replacements. Proc Natl Acad Sci U S A 107(30):13222–13227 Svanberg K (1987) The method of moving aymptotes—a new method for structural optimization. Int J Numer Methods Eng 24:359–373 Svanberg K (2002) A class of globally convergent optimization methods based on conservative convex separable approximations. SIAM J Optim 12(2):555–573 Takezawa A, Nishiwaki S, Kitamura M (2010) Shape and topology optimization based on the phase field method and sensitivity analysis. J Comput Phys 229(7):2697–2718 Talischi C, Paulino GH, Pereira A, Menezes IFM (2012) PolyTop: a Matlab implementation of general topology optimization framework using unstructured polygonal finite element meshes. Struct Multidiscip Optim 45:329–357 Tanskanen P (2002) The evolutionary structural optimization method: theoretical aspects. Comput Methods Appl Mech Eng 191(47–48):5485–5498 Tcherniak D (2002) Topology optimization of resonating structures using SIMP method. Int J Numer Methods Eng 54(11):1605–1622 Tcherniak D, Sigmund O (2001) A web-based topology optimization program. Struct Multidiscip Optim 22(3):179–187 Tootkaboni M, Asadpoure A, Guest JK (2012) Topology optimization of continuum structures under uncertainty—a polynomial chaos approach. Comput Methods Appl Mech Eng 201–204:263–275 Torquato S, Hyun S, Donev A (2003) Optimal design of manufacturable three-dimensional composites with multifunctional characteristics. J Appl Phys 94(9):5748–5755 Vemeganti K, Lawrence WE (2005) Parallel methods for optimality criteria-based topology optimization. Comput Methods Appl Mech Eng 194(34–35):3637–3667 Wadbro E, Berggren M (2006) Topology optimization of an acoustic horn. Comput Methods Appl Mech Eng 196(1–3):420–436 Wallin M, Ristinmaa M, Askfelt H (2012) Optimal topologies derived from a phase-field method. Struct Multidiscip Optim 45(2):171–183 Wang B, Yan J, Cheng G (2011a) Optimal structure design with low thermal directional expansion and high stiffness. Eng Optim 43(6):581–595 Wang F, Jensen JS, Sigmund O (2011b) Robust topology optimization of photonic crystal waveguide with tailored dispersion properties. J Opt Soc Am B 28(3):387–397 Wang F, Lazarov BS, Sigmund O (2011c) On projection methods, convergence and robust formulations in topology optimization. Struct Multidiscip Optim 43(6):767–784 Wang MY, Li L (2013) Shape equilibrium constraint: a strategy for stress-constrained structural topology optimization. Struct Multidiscip Optim 47:335–352 Wang MY, Wang X (2004a) “Color” level sets: a multi-phase method for structural topology optimization with multiple materials. Comput Methods Appl Mech Eng 193(6–8):469–496 Wang MY, Wang X (2004b) PDE-driven level sets, shape sensitivity and curvature flow for structural topology optimization. Comput Model Eng Sci 6(4):373–395 Wang MY, Wang X (2005) A level-set based variational method for design and optimization of heterogeneous objects. Comput Aided Des 37(3):321–337 Wang MY, Zhou S (2004a) Phase field: a variational method for structural topology optimization. Comput Model Eng Sci 6(6):547–566 Wang MY, Zhou S (2004b) Synthesis of shape and topology of multi-material structures with a phase-field method. J Comput Aided Mater Des 11(2–3):117–138 Wang MY, Wang X, Guo D (2003) A level set method for structural topology optimization. Comput Methods Appl Mech Eng 192(1–2):227–246 Wang MY, Chen S, Wang X, Mei Y (2005) Design of multimaterial compliant mechanisms using level-set methods. J Mech Des 127:941–956 Wang Q, Lu Z, Zhou C (2011d) New topology optimization method for wing leading-edge ribs. AIAA J Aircr 48(5):1741–1748 Wang S, Wang MY (2006a) Radial basis functions and level set method for structural topology optimization. Int J Numer Methods Eng 65(12):2060–2090 Wang S, Moon H, Kim C, Kang J, Choi KK (2006a) Reliability-based topology optimization (RBTO). In: Bendsøe MP, Olhoff N, Sigmund O (eds) IUTAM symposium on topological design optimization of structures, machines and materials, Springer, Bendsøe, MP, Olhoff, N, Sigmund O, vol 137, pp 493–504 Wang S, de Sturler E, Paulino GH (2007a) Large-scale topology optimization using preconditioned Krylov subspace methods with recycling. Int J Numer Methods Eng 69(12):2441–2468 Wang SY, Wang MY (2006b) Structural shape and topology optimization using an implicit free boundary parameterization. Comput Model Eng Sci 13(2):119–147 Wang SY, Tai K, Wang MY (2006b) An enhanced genetic algorithm for structural topology optimization. Int J Numer Methods Eng 65(1):18–44 Wang SY, Lim KM, Khoo BC, Wang MY (2007b) An extended level set method for shape and topology optimization. J Comput Phys 221(1):395–421 Wang X, Mei Y, Wang MY (2004a) Incorporating topological derivatives into level set methods for structural optimization. In: 10th AIAA/ISSMO multidisciplinary analysis and optimization conference. AIAA/ISSMO, Albany Wang X, Wang MY, Guo D (2004b) Structural shape and topology optimization in a level-set framework of region representation. Struct Multidiscip Optim 27(1–2):1–19 Wiker N, Klarbring A, Borrvall T (2007) Topology optimization of regions of Darcy and Stokes flow. Int J Numer Methods Eng 69(7):1374–1404 Xia L, Zhu JH, Zhang WH (2012a) A superelement formulation for the efficient layout design of complex multi-component system. Struct Multidiscip Optim 45:643–655 Xia L, Zhu JH, Zhang WH (2012b) Sensitivity analysis with the modified Heaviside function for the optimal layout design of multi-component systems. Comput Methods Appl Mech Eng 241–244:142–154 Xia Q, Wang MY (2008) Topology optimization of thermoelastic structures using level set method. Comput Mech 42(6):837–857 Xia Q, Shi T, Liu S, Wang MY (2012c) A level set solution to the stress-based structural shape and topology optimization. Comput Struct 90–91:55–64 Xia Q, Shi T, Liu S, Wang MY (2013) Shape and topology optimization for tailoring stress in a local region to enhance performance of piezoresistive sensors. Comput Struct 114–115:98–105 Xie YM, Steven GP (1993) A simple evolutionary procedure for structural optimization. Comput Struct 49(5):885–896 Xie YM, Steven GP (1997) Evolutionary structural optimization. Springer Xu S, Cai Y, Cheng G (2010) Volume preserving nonlinear density filter based on heaviside functions. Struct Multidiscip Optim 41(4):495–505 Yamada Y, Izui K, Nishiwaki S, Takezawa A (2010) A topology optimization method based on the level set method incorporating a ficticious interface energy. Comput Methods Appl Mech Eng 199(45–48):2876–2891 Yang XY, Xie Y, Steven GP, Querin OM (1999) Bidirectional evolutionary method for stiffness optimization. AIAA J 37(11):1483–1488 Yang XY, Xie YM, Liu JS, Parks GT, Clarkson PJ (2003) Perimeter control in the bi-directional evolutionary optimization method. Struct Multidiscip Optim 24(6):430–440 Yang XY, Xie YM, Steven GP (2005) Evolutionary methods for topology optimisation of continuous structures with design dependent loads. Comput Struct 83(12–13):956–963 Yang XY, Huang X, Xie YM, Li Q, Rong JH (2011) Topology optimization of composite materials with optimal stiffness and thermal conductivity. Int J Optim Civil Eng 3:397–417 Yang XY, Huang X, Rong JH, Xie YM (2013) Design of 3D orthotropic materials with prescribed ratios for effective Young’s moduli. Comput Mater Sci 67:229–237 Yoon GH (2010a) Maximizing the fundamental eigenfrequency of geometrically nonlinear structures by topology optimization based on element connectivity parameterization. Comput Struct 88(1–2):120–133 Yoon GH (2010b) Structural topology optimization for frequency response problem using model reduction schemes. Comput Methods Appl Mech Eng 199(25–28):1744–1763 Yoon GH (2010c) Topology optimization for stationary fluid-structure interaction problems using a new monolithic formulation. Int J Numer Methods Eng 82(5):591–616 Yoon GH, Kim YY (2005) Element connectivity parameterization for topology optimization of geometrically nonlinear structures. Int J Solids Struct 42(7):1983–2009 Yoon GH, Kim YY (2007) Topology optimization of material-nonlinear structures by the element connectivity parameterization. Int J Numer Methods Eng 69(10):2196–2218 Yoon GH, Jensen JS, Sigmund O (2006) Topology optimization for acoustic-structure interaction problems. In: Bendsøe MP, Olhoff N, Sigmund O (eds) IUTAM symposium on topological design optimization of structures, machines and materials, Springer, Bendsøe, MP, Olhoff, N, Sigmund O, vol 137, pp 355–364 Yoon GH, Jensen JS, Sigmund O (2007) Topology optimization of acoustic-structure interaction problems using a mixed finite element formulation. Int J Numer Methods Eng 70(9):1049–1075 Zhang H, Zhang Z, Liu S (2008) A new boundary search scheme for topology optimization of continuum structures with design-dependent loads. Struct Multidiscip Optim 37(2):121–129 Zheng B, Chaang CJ, Gea H (2009) Topology optimization with design-dependent pressure loads. Struct Multidiscip Optim 6(6):535–543 Zhou M, Rozvany GIN (2001) On the validity of ESO type methods in topology optimization. Struct Multidiscip Optim 21(1):80–83 Zhou M, Shyy YK, Thomas HL (2001) Checkerboard and minimum member size control in topology optimization. Struct Multidiscip Optim 21(2):152–158 Zhou M, Fluery R, Shyy YK, Thomas HL, Brennan JM (2002) Progress in topology optimization with manufacturing constraints. In: 9th AIAA/ISSMO symposium on multidisciplinary analysis and optimization. AIAA/ISSMO, Atlanta Zhou M, Pagaldipti N, Thomas HL, Shyy YK (2004) An integrated approach to topology, sizing, and shape optimization. Struct Multidiscip Optim 26:308–317 Zhou S, Li Q (2008a) A variational level set method for the topology optimization of steady-state Navier-Stokes flow. J Comput Phys 227(24):10178–10195 Zhou S, Li Q (2008b) Computational design of microstructural composites with tailored thermal conductivity. Numer Heat Transf A 54:686–708 Zhou S, Li Q (2008c) Computational design of multi-phase microstructural materials for extremal conductivity. Comput Mater Sci 43:549–564 Zhou S, Wang MY (2006) 3D multi-material structural topology optimization with the generalized Cahn-Hilliard equations. Comput Model Eng Sci 16(2):83–102 Zhou S, Wang MY (2007) Multimaterial structural topology optimization with a generalized Cahn-Hilliard model of multiphase transition. Struct Multidiscip Optim 33(2):89–111 Zhou S, Li W, Li Q (2010a) Level-set based topology optimization for electromagnetic dipole antenna design. J Comput Phys 229:6915–6930 Zhou S, Li W, Sun G, Li Q (2010b) A level-set procedure for the design of electromagnetic metamaterials. Opt Express 18:6693–6702 Zhu JH, Zhang WH (2010) Integrated layout design of supports and structures. Comput Methods Appl Mech Eng 199:557–569 Zhu JH, Zhang WH, Qiu KP (2007) Bi-directional evolutionary topology optimization using element replaceable method. Comput Mech 40(1):97–109 Zhu JH, Zhang WH, Beckers P, Chen Y, Guo Z (2008) Simultaneous design of component layout and support structures using coupled shape and topology optimization technique. Struct Multidiscip Optim 36:29–41 Zhu JH, Zhang WH, Beckers P (2009) Integrated layout design of multi-component systems. Int J Numer Methods Eng 78:631–651 Zhu JH, Beckers P, Zhang WH (2010) On the multi-component layout design with inertial force. J Comput Appl Math 234:2222–2230 Zhuang CG, Xiong ZH, Ding H (2007) A level set method for topology optimization of heat conduction problem under multiple load cases. Comput Methods Appl Mech Eng 196(4–6):1074–1084 Zuo ZH, Xie YM, Huang X (2009) Combining genetic algorithms with BESO for topology optimization. Struct Multidiscip Optim 38(5):511–523 Zuo ZH, Huang X, Yang X, Rong JH, Xie YM (2013) Comparing optimal material microstructures with optimal periodic structures. Comput Mater Sci 69:137–147 Zhou, M and Rozvany, GIN (1991) The COC algorithm, Part II: topological, geometrical and generalized shape optimization. Comp Meth Appl Mech Engrg 89:309-336