Fixed abrasive machining of non-metallic materials

Adam, 2014, SiC/SiC Ceramic Matric Composites: A Turbine Engine Perspective Akbari, 2014 Alves, 2015, Effects of Belt Speed, Pressure and Grit Size on the Sanding of Pinus Elliottii Wood, Cerne, 21, 45, 10.1590/01047760201521011216 Ronald, 2009, Studies on the Influence of Grinding Wheel Bond Material on the Grindability of Metal Matrix Composites, Materials and Design, 30, 679, 10.1016/j.matdes.2008.05.038 Andersen, 1993, PDC-Bit Performance under Simulated Borehole Conditions, SPE Drilling and Completion, 8, 184, 10.2118/20412-PA Apmann, 2004 Ashby, 2010 Azar, 2013, Pointing Towards Improved PDC Bit Performance: Innovative Conical Shaped Polycrystalline Diamond Element Achieves Higher ROP. and Total Footage Beck, 1995, The Effect of Rheology on Rate of Penetration, 333 Bertsche, 2013, Ultrasonic Slot Machining of a Silicon Carbide Matrix Composite, The International Journal of Advanced Manufacturing Technology, 66, 1119, 10.1007/s00170-012-4394-7 Bhagavat BS, Bhagavat M, Vandamme R, Komura T (2007) Double Side Wafer Grinder and Methods for Assessing Workpiece Nanotopology, US Patent 7,601,049. Bhosale, 2014, Effect of Process Parameters on MRR TWR and Surface Topography in Ultrasonic Machining of Alumina–Zirconia Ceramic Composite, Ceramics International, 40, 12831, 10.1016/j.ceramint.2014.04.137 Biermann, 2012, Abrasive Points for Drill Grinding of Carbon Fibre Reinforced Thermoset, CIRP Annals, 61, 299, 10.1016/j.cirp.2012.03.096 Biermann, 2016, Untersuchungen Zum Diamantkernbohren von Hochfestem Stahlbeton, Diamant Hochleistungswerkzeuge—dihw, 30 Black, 2008, Optimization of Deep Drilling Performance With Improvements in Drill Bit and Drilling Fluid Design Bockhorst, 2010 Brinksmeier, 2010, Ultra-Precision Grinding, CIRP Annals, 59, 652, 10.1016/j.cirp.2010.05.001 Brinksmeier, 2009, Dynamic Behavior of ELID-Processes, 569 Brussel, 2003, A Nanometre-Precision, UItra-Stiff Piezostepper Stage for ELID Grinding, Annals of the CIRP, 52, 317, 10.1016/S0007-8506(07)60592-7 Buehlmann, 2009, Performance of Woodfiber-Plastic Composites Subjected to Abrasive Machining, Forest Products Journal, 59, 61 Caenn, 2011 Campbell, 1924, The Protection of Steam-Turbine Disk Wheels From Axial Vibration—Part II—Exposition of the Nature and Theory of Vibration in Turbine Wheels, General Electric Review, 27, 459 Carrapatoso, 2013, Simulation of Single Cutter Experiments in Evaporite Using the Discrete Element Method Chang, 2006, Empirical Relations between Rock Strength and Physical Properties in Sedimentary Rocks, Journal of Petroleum Science and Engineering, 51, 223, 10.1016/j.petrol.2006.01.003 Chowdhury, 2016, Mitigating Salt and Sub-Salt Drilling Challenges Using Hybrid Bit Technology in Deepwater, Gulf of Mexico Clark, 2003, Fixed Abrasive Diamond Wire Machining—Part I: Process Monitoring and Wire Tension Force, International Journal of Machine Tools and Manufacture, 43, 523, 10.1016/S0890-6955(02)00215-8 Clark, 2003, Fixed Abrasive Diamond Wire Machining—Part II: Experiment Design and Results, International Journal of Machine Tools and Manufacture, 43, 533, 10.1016/S0890-6955(02)00216-X Comley, 2011, Grinding Metre Scale Mirror Segments for the E-ELT Ground Based Telescope, CIRP Annals, 60, 379, 10.1016/j.cirp.2011.03.120 Cong, 2012, Rotary Ultrasonic Machining of Carbon Fiber-Reinforced Plastic Composites: Using Cutting Fluid vs. Cold Air as Coolant, Journal of Composite Materials, 46, 1745, 10.1177/0021998311424625 Cong, 2012, Rotary Ultrasonic Machining of CFRP Composites: A Study on Power Consumption, Ultrasonics, 52, 1030, 10.1016/j.ultras.2012.08.007 Cong, 2014, Rotary Ultrasonic Machining of Cfrp: A Mechanistic Predictive Model for Cutting Force, Ultrasonics, 54, 663, 10.1016/j.ultras.2013.09.005 Crow, 1974, The Mechanics of Hydraulic Rock Cutting Curodeau, 2008, Ultrasonic Abrasive μ-Machining with Thermoplastic Tooling, International Journal of Machine Tools and Manufacture, 48, 1553, 10.1016/j.ijmachtools.2008.06.007 Curry, 2003, Grinding Temperature Measurements in Magnesia-Partially-Stabilized Zirconia Using Infrared Spectrometry, Journal of the American Ceramic Society, 86, 333, 10.1111/j.1151-2916.2003.tb00019.x Curry, 2013, Full-Scale Laboratory Study of the Impact of Drilling Fluid Composition and Properties on Penetration Rates in Brazilian Pre-Salt Carbonates Curry, 2017, The Effect of Borehole Pressure on the Drilling Process in Salt, SPE Drilling & Completion, 32, 25, 10.2118/173023-PA Dai, 2005, Ultraprecision Fabrication of Large-Scale SiC Spherical Mirror Using ELID Grinding Process, Key Engineering Materials, 291, 73, 10.4028/www.scientific.net/KEM.291-292.73 Delwiche, 1992, Quatrocut Cutting Structure Denkena, 2010, Process and Tool Design for High Speed Cutting of Granite Denkena, 2011, Wire Cutting Tool Concepts for Steel Machining, Advanced Materials Research, 325, 240, 10.4028/www.scientific.net/AMR.325.238 Denkena, 2011, Deterministic Grain Distribution on Cut-Off Grinding Wheels, Proceedings of the 1st International Conference on Stone and Concrete Machining, 99 Denkena, 2011, Machining of Reinforced Concrete Using Grinding Wheels with Defined Grain Pattern, International Journal of Abrasive Technology, 4, 101, 10.1504/IJAT.2011.041606 Denkena, 2009, Thin Tools for the High Speed Cutting of Granite, International Journal of Abrasive Technology, 2, 173, 10.1504/IJAT.2009.022586 Denkena, 2014, Material Removal Simulation of Cut-Off Grinding Processes for an Adapted Tool Design, Proceedings of the 5th Global Stone Congress, 8 Denkena, 2008, Akustische Prozessanalyse Bei Der Bearbeitung von Beton, Proceedings of the 6th IFW-Steinkolloquium: Entwicklungen in der Naturstein- und Bauwerkstoffbearbeitung, 79 Denkena, 2014, Material Removal Simulation of Cut-Off Grinding Processes for an Adapted Tool Design, Proceedings of the 5th Global Stone Congress, 2 Denkena, 2013, Grundlagen Zur Simulationsgestützten Auslegung von Seilschleifwerkzeugen, Diamant Hochleistungswerkzeuge. dihw Magazin by Harnisch, 5, 20 Denkena, 2010, Trennschleifen von Beton Und Stahlbeton—Einfluss Der Gefügebestandteile Auf Die Bearbeitungseigenschaften, Diamant Hochleistungswerkzeuge—dihw, 42 Denkena, 2013, Cut-Off Grinding of Natural Stone—Increased Efficiency by Means of Electro-Contact-Discharge-Dressing Denkena, 2013, Material Removal Simulation of Wire Cutting Processes for an Adapted Tool Design Denkena, 2012, Prozessentwicklung Zur Trockenen Bearbeitung Metallischer Und Mineralischer Strukturen Im Rückbau Kerntechnischer Anlagen, Diamant Hochleistungswerkzeuge—dihw, 25 Denkena, 2013, Seilschleifen Im Rückbau Kerntechnischer Anlagen Denkena, 2010, Process Analysis in Cut-Off Grinding of Stone Compound Material Denkena B, Konopatzki B, Seiffert FKR (2009) Einsatz Hochharter Schneidstoffe Beim Schleifen −Trennschleifen von Natur- Und Kunststein. Diamant Hochkleistungswerkzeuge −dihw, 32–39. DiGiovanni, 2014, Innovative Non-Planar Face PDC. Cutters Demonstrate 21% Drilling Efficiency Improvement in Interbedded Shales and Sand Doi, 2015 Eckel, 1958, Effects of Pressure on Rock Drillability, Petroleum Transactions AIME, 213, 1, 10.2118/877-G Eckel, 1954, Effect of Mud Properties on Drilling Rate, Drilling and Production Practice, 119 Fang, 2016, A Thermal Model for the Calculation of Energy Partitions in Sawing with a Segmented Blade, High Temperatures—High Pressures, 45, 35 Fear, 1994, An Expert System for Drill Bit Selection Feenstra, 1984, The Effect of Bit Hydraulics on Bit Performance in Relation to the Rock Destruction Mechanism at Depth Feng, 2012, Rotary Ultrasonic Machining of Carbon Fiber-Reinforced Polymer: Feasibility Study, Machining Science and Technology, 16, 380, 10.1080/10910344.2012.698962 Franca, 2010, Cutting Action of Impregnated Diamond Segments: Modelling and Experimental Validation Furutomo, 2014, Grinding Performance of SiC-Based Ceramics Composites by Mounted Wheel, Journal of the Japan Society for Abrasive Technology, 58, 380 Galletta, 1993, Impregnated Bit Technology Improves Drilling Efficiency in North Sea Conglomerates Garcia-Gavito, 1994, Proper Nozzle Location, Bit Profile, and Cutter Arrangement Affect PDC. Bit Performance Significantly, SPE Drilling & Completion, 9, 167, 10.2118/20415-PA Garcia, 2013, Hybrid Bit Technology Expands Application Range in Harsh Rock Environments Glatzel, 2004, 65 Glowka, 1986, Effects of Thermal and Mechanical Loading on PDC Bit Life, SPE Drilling Engineering, 201, 10.2118/13257-PA Hahmann, 2012, 23 Han, 2009, ELID Grinding of Sapphire—Experimental Approach Handin, 1986, Experimental Deformation of Rock Salt, 117 Handin, 1957, Experimental Deformation of Sedimentary Rocks under Confining Pressure: Tests at Room Temperature on Dry Samples, Bulletin of the American Association of Petroleum Geologists, 41, 1 Hardin, 2004, Fixed Abrasive Diamond Wire Saw Slicing of Single-Crystal Silicon Carbide Wafers, Materials and Manufacturing Processes, 19, 355, 10.1081/AMP-120029960 Hbaieb, 2013, Innovative Hybrid Bit Mitigates Geological Uncertainties, Improves Drilling Performance in Brazilian Pre-Salt Formations Heinzel, 2009, Engineered Wheels for Grinding of Optical Glass, CIRP Annals, 58, 317, 10.1016/j.cirp.2009.03.096 Heywood, 2005, Recent Material and Geometrical Changes in Impreg Technology on Turbine Drive Lead to Reduced Drilling Costs in Hard Rock Application Hocheng, 1995, Preliminary Study of Ultrasonic Drilling of Fiber-Reinforced Plastics, Journal of Materials Processing Technology, 48, 255, 10.1016/0924-0136(94)01657-M Hocheng, 2000, Assessment of Ultrasonic Drilling of C/SiC Composite Material, Composites Part A: Applied Science and Manufacturing, 31, 133, 10.1016/S1359-835X(99)00065-2 Holster, 1984, Effect of Bit Hydraulic Horsepower on the Drilling Rate of a Polycrystalline Diamond Compact Bit, Journal of Petroleum Technology, 2210 Huang, 2013, Sawing Performance Comparison of Brazed and Sintered Diamond Wires, Chinese Journal of Mechanical Engineering, 26, 393, 10.3901/CJME.2013.02.393 Huang, 1999, Discrete Element Modeling of Rock Cutting, Rock Mechanics for Industry, 1, 123 Huang, 2013, An Experimental Study of Machining Characteristics and Tool Wear in the Diamond Wire Sawing of Granite, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227, 943, 10.1177/0954405413478262 Huang, 2017, An Experimental Research on the Force and Energy During the Sapphire Sawing Using Reciprocating Electroplated Diamond Wire Saw, Journal of Manufacturing Science and Engineering, 139, 121011, 10.1115/1.4038109 Huang, 2011, The Cooling Effects of Coolant Supply Mode for Granite Sawing with Diamond Wire, 39 Ikeda J, Sasakura T, Yoshimura Y, Ueda K (1999) Double Side Grinding Apparatus for Plate Disklike Work, US Patent 5,989,108. Ikeda S, Okun S, Kato T (2003) Double-Sided Simultaneous Grinding Method, Double-Sided Simultaneous Grinding Machine, Double-Sided Simultaneous Lapping Method, and Double-Sided Simultaneous Lapping Machine, US. Patent 6,652,358. Di Ilio, 2000, Comparison between Conventional Abrasives and Superabrasives in Grinding of SiC-Aluminium Composites, International Journal of Machine Tools and Manufacture, 40, 173, 10.1016/S0890-6955(99)00061-9 Izbinski, 2015, Innovative Dual-Chamfer Edge Technology Leads to Performance Gains in Dual-Chamfer Cutter Design Jahanmir, 1999 Jianxin, 2002, Ultrasonic Machining of Alumina-Based Ceramic Composites, Journal of the European Ceramic Society, 22, 1235, 10.1016/S0955-2219(01)00437-X Jirapattarasilp, 2007, The Experiment of High-Speed Grinding of a Gemstone: Cubic Zirconia, The International Journal of Advanced Manufacturing Technology, 33, 1136, 10.1007/s00170-006-0545-z Kansteiner, 2015, Single Segment Tests for the Analysis of the Core Drilling Process of Concrete Materials, Proceedings of the 3rd International Conference on Stone and Concrete Machining, 109 Kansteiner, 2015, Process Forces and Groove Development in Single Grain Scratch Tests of Concrete and Reinforced Concrete, Applied Mechanics, 794, 207 Kasuga, 2013, Mirror Surface Grinding of Sapphire by Coarse Grain Size Diamond Wheels, International Journal of Nanomanufacturing, 10, 309, 10.1504/IJNM.2014.060801 Katahira, 2002, ELID Grinding and Tribological Characteristics of TiAlN Film, International Journal of Machine Tools and Manufacture, 42, 1307, 10.1016/S0890-6955(02)00076-7 Katahira, 2010, Modification of Surface Properties on a Nitride Based Coating Films through Mirror-Quality Finish Grinding, CIRP Annals, 59, 593, 10.1016/j.cirp.2010.03.132 Katahira, 2005, ELID Grinding Characteristics and Surface Modifying Effects of Aluminum Nitride (AlN) Ceramics, International Journal of Machine Tools and Manufacture, 45, 891, 10.1016/j.ijmachtools.2004.10.017 Katahira, 2003, 317 Kato T, Okuni S, Ikeda S, Okabe K, Oshima H (2002) Semiconductor Wafer and Production Method Thereof, US. Patent 6,491,836. Kipp, 2015, Scratch Tests with Single Diamond Tools on Reinforced Concrete and Its Components for the Analysis of the Material Separation, Proceedings of the 3rd International Conference on Stone and Concrete Machining, 40 Kishimoto J (2002) Semiconductor Wafer and Method for Fabrication Thereof, US Patent 6,352,927. Klocke, 2015, Abrasive Machining of Advanced Aerospace Alloys and Composites, CIRP Annals, 64, 581, 10.1016/j.cirp.2015.05.004 Köhler, 2011, Tool Concepts for Wire Cutting of Reinforced Concrete, Proceedings of the 1st International Conference on Stone and Concrete Machining, 11 Koshy, 2005, Novel Kinematics for Cylindrical Grinding of Brittle Materials, CIRP Annals, 54, 289, 10.1016/S0007-8506(07)60105-X Kumar, 2006, Experimental Investigation of Ultrasonic Machining of an Alumina-Based Ceramic Composite, Journal of the American Ceramic Society, 89, 2413, 10.1111/j.1551-2916.2006.01085.x Ledgerwood, 2007, PFC Modeling of Rock Cutting under High Pressure Conditions Lee, 1997, Mechanism of the Ultrasonic Machining of Ceramic Composites, Journal of Materials Processing Technology, 71, 195, 10.1016/S0924-0136(97)00068-X Li, 2016, Analytical Force Modeling of Fixed Abrasive Diamond Wire Saw Machining With Application to SiC Monocrystal Wafer Processing, Journal of Manufacturing Science and Engineering, 139, 41003, 10.1115/1.4034792 Li, 2002, Cost-Effective Machining of Granite by Reducing Tribological Interactions, Journal of Materials Processing Technology, 129, 389, 10.1016/S0924-0136(02)00699-4 Li, 2006, Simultaneous Double Side Grinding of Silicon Wafers: A Literature Review, International Journal of Machine Tools and Manufacture, 46, 1449, 10.1016/j.ijmachtools.2005.09.011 Li, 2005, Rotary Ultrasonic Machining of Ceramic Matrix Composites: Feasibility Study and Designed Experiments, International Journal of Machine Tools and Manufacture, 45, 1402, 10.1016/j.ijmachtools.2005.01.034 Lin, 2003 Liu, 2007, ELID Grinding of Silicon Wafers: A Literature Review, International Journal of Machine Tools and Manufacture, 47, 529, 10.1016/j.ijmachtools.2006.06.001 Liu, 2007, Grinding Wheels for Manufacturing of Silicon Wafers: A Literature Review, International Journal of Machine Tools and Manufacture, 47, 1, 10.1016/j.ijmachtools.2006.02.003 Liu, 2017, Experiment and Smooth Particle Hydrodynamics Simulation of Debris Size in Grinding of Calcified Plaque in Atherectomy, CIRP Annals, 66, 325, 10.1016/j.cirp.2017.04.090 Malkin, 1996, Grinding Mechanisms for Ceramics, CIRP Annals, 45, 569, 10.1016/S0007-8506(07)60511-3 Malkin, 2008 Mandler, 1997, Ceramic Successes in Diesel Engines, 6th International Symposia on Ceramic Materials and Components for Engines Marinescu, 2006 Martinez, 2013, Simulation of Single Cutter Experiments in Evaporites through Finite Element Method Matsui, 1988, An Experimental Study on the Grinding of Silicon Wafers—the Wafer Rotation Grinding Method (1st Report), Bulletin of the Japan Society of Precision Engineering, 22, 295 Maurer, 1965, Bit-Tooth Penetration under Simulated Borehole Conditions, Journal of Petroleum Technology, 17, 1433, 10.2118/1260-PA McKeown, 1990, Ultra-Precision High Stiffness CNC. Grinding Machines for Ductile Mode Grinding of Brittle Materials, Infrared Technology and Application, 56, 301, 10.1117/12.22336 Meiners, 2007, Optimization of Deep Drilling Performance Miao T, Li L (2014) Study on Influencing Factors of Sanding Efficiency of Abrasive Belts in Wood Materials. 59(5):835–842. Mimura, 2008, Focusing Mirror for X-Ray Free-Electron Lasers, Review of Scientific Instruments, 79, 83104, 10.1063/1.2964928 Moore, 1958, Five Factors That Influence Drilling Rate, Oil and Gas Journal, 56, 142 Mori T (1987) Semiconductor Wafer Surface Grinding Apparatus, US. Patent 4,693,036. Mostofi, 2014, The Wear Mechanisms of Impregnated Diamond Bits de Moura, 2006, Effects of Abrasive Mineral, Grit Size and Feed Speed on the Quality of Sanded Surfaces of Sugar Maple Wood, Wood Science and Technology, 40, 517, 10.1007/s00226-006-0070-0 Naslain, 2004, Design, Preparation and Properties of Non-Oxide CMCs for Application in Engines and Nuclear Reactors: An Overview, Composites Science and Technology, 64, 155, 10.1016/S0266-3538(03)00230-6 Negm, 2016, The Disruptive Concept of 3D Cutters and Hybrid Bits in Polycrystalline Diamond Compact Drill-Bit Design Ning, 2016, Rotary Ultrasonic Machining of CFRP: A Comparison with Grinding, Ultrasonics, 66, 125, 10.1016/j.ultras.2015.11.002 Nishiguchi M, Gotoh N (1992) Apparatus for Grinding Semiconductor Wafer, US Patent 5,113,622. Nishiguchi NM, Sekiguchi T, Miyoshi I, Nishio K (1991) Surface Grinding Machine, US. Patent 5,035,087. Ohmori, 2001, Ultraprecision Micro-Grinding of Germanium Immersion Grating Element for Mid-Infrared Super Dispersion Spectrograph, CIRP Annals, 50, 221, 10.1016/S0007-8506(07)62109-X Ohmori, 1990, Mirror Surface Grinding of Silicon Wafers with Electrolytic In-Process Dressing, CIRP Annals, 39, 329, 10.1016/S0007-8506(07)61065-8 Ohmori, 2002, Nano-Precision Surface Machining for Ceramics by Ultraprecision ELID-Grinding, Ceramics Japan: Bulletin of the Ceramic Society of Japan, 37, 799 Ohmori, 2003, ELID-Grinding of Microtool and Applications to Fabrication of Microcomponents, International Journal of Materials and Product Technology, 18, 498, 10.1504/IJMPT.2003.002505 Ohmori, 2011 Ohmori, 1995, Analysis of Mirror Surface Generation of Hard and Brittle Materials by ELID (Electronic In-Process Dressing) Grinding with Superfine Grain Metallic Bond Wheels, CIRP Annals, 44, 287, 10.1016/S0007-8506(07)62327-0 Oliveira, 2015, Unique Hybrid Drill Bit with Novel PDC Cutters Improves Performance in Ultra-Deepwater Brazil Pre-Salt Application Panhorst, 1970, 19 Paspaliaris, 2001, Ornamental and Dimensional Stones Network (OSNET), Proceedings of the 1st Annual Workshop Pei, 2008, Grinding of Silicon Wafers: A Review from Historical Perspectives, International Journal of Machine Tools and Manufacture, 48, 1297, 10.1016/j.ijmachtools.2008.05.009 Pelshenke, 2012, Electro-Contact Discharge Dressing of Cut-Off Grinding Disks for Natural Stone Machining, Proceedings of the 4th Global Stone Congress, 90 Pelshenke PC, Denkena B, Kohler JKB (2012) Trennschleifen von Naturstein — Flexibler Durch Kontakterosives Schärfen. Diamant Hochleistungswerkzeuge — dihw, 48–54. Pessier, 1992, Quantifying Common Drilling Problems With Mechanical Specific Energy and a Bit-Specific Coefficient of Sliding Friction Pessier, 2010, Hybrid Bits Offer Distinct Advantages in Selected Roller-Cone and PDC Bit Applications Pietsch GJ, Kerstan M, Blaha W (2005) Semiconductor Wafer, Apparatus and Process for Producing the Semiconductor Wafer, US Patent 7,867,059 B2. Pinto, 2004, Ultrafast Drilling in the Gulf of Thailand: Putting Science into the Design Process Prasad, 2009, Improved Method for Estimating the Strength of Carbonate Rocks Qin, 2009, Simultaneous Double-Side Grinding of Silicon Wafers: A Review and Analysis of Experimental Investigations, Machining Science and Technology, 13, 285, 10.1080/10910340903237673 Rabiey, 2013, High Performance Grinding of Zirconium Oxide (ZrO 2) Using Hybrid Bond Diamond Tools, CIRP Annals, 62, 343, 10.1016/j.cirp.2013.03.073 Rahmani, 2016, New Drill Bit Technology Sets Drilling Records in Carbonates and Harsh Rock Applications Ramanath S, Saucier KA, Upadhyay R (2017) Bonded Abrasive Article and Method of Forming, US Patent 9,676,077. Robben, 2010, Airborne Sound Emission as a Process Monitoring Tool in the Cut-off Grinding of Concrete, Applied Acoustics, 71, 52, 10.1016/j.apacoust.2009.07.004 Rowinski, 1967, 393 Rozenberg, 1964 Saloni, 2005, Abrasive Machining Process Characterization on Material Removal Rate, Final Surface Texture, and Power Consumption for Wood, Forest Products Journal, 55, 35 Schmidt, 2004, Advanced Ceramic Matrix Composite Materials for Current and Future Propulsion Technology Applications, Acta Astronautica, 55, 409, 10.1016/j.actaastro.2004.05.052 Schmidt, 2004, Advanced Ceramic Matrix Composite Materials for Current and Future Propulsion Technology Applications, Acta Astronautica, 55, 409, 10.1016/j.actaastro.2004.05.052 Scott, 2006, The History and Impact of Synthetic Diamond Cutters and Diamond Enhanced Inserts on the Oil and Gas Industry, Industrial Diamond Review, 66, 48 Shih, 2003, Cost-Effective Grinding of Zirconia Using the Dense Vitreous Bond Silicon Carbide Wheel, Journal of Manufacturing Science and Engineering, 125, 297, 10.1115/1.1559167 Shih, 2012, Prediction of Bone Grinding Temperature in Skull Base Neurosurgery, CIRP Annals, 61, 307, 10.1016/j.cirp.2012.03.078 Shih AJ, Yonushonis TM (2000) High Infeed Rate Method for Grinding Ceramic Workpiece with Silicon Carbide Grinding Wheels, US Patent 6,030,277. Shih, 2016, Grinding Wheel Motion, Force, Temperature, and Material Removal in Rotational Atherectomy of Calcified Plaque, CIRP Annals, 65, 345, 10.1016/j.cirp.2016.04.012 Siegel, 1999, Dental Burs—What Bur for Which Application? A Survey of Dental Schools, Journal of Prosthodontics, 8, 258, 10.1111/j.1532-849X.1999.tb00048.x Simon, 1963, Energy Balance in Rock Drilling, SPE Journal, 3, 298 Smith, 1995, Drilling Plastic Formations Using Highly Polished PDC Cutters, SPE Annual Technical Conference & Exhibition, 10.2118/30476-MS Stahiev J (1981) Über Das Vorbereiten Und Einrichten von Kreissägeblättern. Holztechnologie:Band 22. Stapel, 1996, Innovative Steerable System, Combined With Block Set Impregnated Diamond Bit Design, Dramatically Improves Economics of Dutch Horizontal Well Sung, 1999, Brazed Diamond Grid: A Revolutionary Design for Diamond Saws, Diamond and Related Materials, 8, 1541 Suya Prem Anand, 2017, Performance of Diamond and Silicon Carbide Wheels on Grinding of Bioceramic Material Under Minimum Quantity Lubrication Condition, Journal of Manufacturing Science and Engineering, 139, 121019, 10.1115/1.4037940 Tabuchi S (1984) Grinding Machine, US. Patent 4,481,738. Taylor, 1999, Quantification of Process Parameters in a Wood Sanding Operation, Forest Products Journal Products, 49, 41 Teale, 1965, The Concept of Specific Energy in Rock Drilling, International Journal of Rock Mechanics and Mining Science, 2, 57, 10.1016/0148-9062(65)90022-7 Tönshoff, 1977 Veenhuizen, 1997, Ultra-High Pressure Jet Assist of Mechanical Drilling van Venrooy, 1997, New PDC Bit Technology Proves Cost-Effective in Drilling Oman Carbonates, SPE/IADC Middle East drilling Wegener, 2011, Conditioning and Monitoring of Grinding Wheels, CIRP Annals, 60, 757, 10.1016/j.cirp.2011.05.003 Wells, 2008, Bit Balling Mitigation in PDC Bit Design West, 2004, Application of New Impregnated Diamond Bit Technology Saves Operator $ 2 Million Drilling Southern Oklahoma Well Wirtz, 2017, A Discussion on Material Removal Mechanisms in Grinding of Cemented Carbides, Journal of Manufacturing Science and Engineering, 139, 121002, 10.1115/1.4036995 Wong, 2016, New Hybrid Bit Technology Provides Improved Performance in Conventional Intervals Wu, 2016, Wire Sawing Technology: A State-of-the-Art Review, Precision Engineering, 43, 1, 10.1016/j.precisioneng.2015.08.008 Wu, 2013, Effects of Carbide and Nitride Inclusions on Diamond Scribing of Multicrystalline Silicon for Solar Cells, Precision Engineering, 37, 500, 10.1016/j.precisioneng.2012.10.008 Xu, 1997, Enamel Subsurface Damage Due to Tooth Preparation with Diamonds, Journal of Dental Research, 76, 1698, 10.1177/00220345970760101201 Xu, 1998, Indentation Damage and Mechanical Properties of Human Enamel and Dentin, Journal of Dental Research, 77, 472, 10.1177/00220345980770030601 Xu, 2002, Quantitative Analysis of the Loads Acting on the Abrasive Grits in the Diamond Sawing of Granites, Journal of Materials Processing Technology, 52 Xu, 2001, Experimental Study on Temperatures and Energy Partition at the Diamond-Granite Interface in Grinding, Tribology International, 34, 421, 10.1016/S0301-679X(01)00039-1 Xu, 2001, Forces and Energy in Circular Sawing and Grinding of Granite, Journal of Manufacturing Science and Engineering, 123, 13, 10.1115/1.1344900 Xu, 2003, Force Ratio in the Circular Sawing of Granites with a Diamond Segmented Blade, Journal of Materials Processing Technology, 139, 282 Yamono T (2007) Semiconductor Device and Method of Fabricating the Same, US Patent 7,417,311 B2. Zhang, 2000, Small-Hole Machining of Ceramic Material with Electrolytic Interval-Dressing (ELID-II) Grinding, Journal of Materials Processing Technology, 105, 284, 10.1016/S0924-0136(00)00648-8 Zhang, 2013, Mist Cooling in Neurosurgical Bone Grinding, CIRP Annals, 62, 367, 10.1016/j.cirp.2013.03.125 Zhao, 2007, Surface and Subsurface Integrity in Diamond Grinding of Optical Glasses on Tetraform “C”, International Journal of Machine Tools and Manufacture, 47, 2091, 10.1016/j.ijmachtools.2007.05.005 Zheng, 2016 Zheng, 2018, Computational Fluid Dynamics Modeling of the Burr Orbital Motion in Rotational Atherectomy with Particle Image Velocimetry Validation, Annals of Biomedical Engineering, 46, 567, 10.1007/s10439-018-1984-z Zhong, 2002, Grinding of Alumina/aluminum Composites, Journal of Materials Processing Technology, 123, 13, 10.1016/S0924-0136(02)00075-4