Optimization of roof solar reflectance under different climate conditions, occupancy, building configuration and energy systems

European Commission, Energy Efficiency in Buildings, (2016). https://ec.europa.eu/energy/en/topics/energy-efficiency/buildings (Accessed 28 November, 2016). Santamouris, 2016, Innovating to zero the building sector in Europe: minimising the energy consumption, eradication of the energy poverty and mitigating the local climate change, Sol. Energy, 128, 61, 10.1016/j.solener.2016.01.021 Pain, 2016, The rise of the urbanite, Nature, 531, S50, 10.1038/531S50a Akbari, 2016, Three decades of urban heat islands and mitigation technologies research, Energy Build., 133, 834, 10.1016/j.enbuild.2016.09.067 Santamouris, 2014, Cooling the cities − a review of reflective and green roof mitigation technologies to fight heat island and improve comfort in urban environments, Sol. Energy, 103, 10.1016/j.solener.2012.07.003 Rossi, 2016, A carbon footprint and energy consumption assessment methodology for UHI-affected lighting systems in built areas, Energy Build., 114 Ascione, 2016, Optimization of building envelope design for nZEBs in Mediterranean climate: performance analysis of residential case study, Appl. Energy, 183, 938, 10.1016/j.apenergy.2016.09.027 Marino, 2015, The influence of surface finishes on the energy demand of HVAC systems for existing buildings, Energy Build., 95, 70, 10.1016/j.enbuild.2015.02.036 Fan, 2016, Natural convection flows along a 16-storey high-rise building, Build. Environ., 107, 215, 10.1016/j.buildenv.2016.08.003 Pisello, 2016, Investigation on the effect of innovative cool tiles on local indoor thermal conditions: finite element modeling and continuous monitoring, Build. Environ., 97, 55, 10.1016/j.buildenv.2015.11.038 Pisello, 2015, Influence of human behavior on cool roof effect for summer cooling, Build. Environ., 88, 10.1016/j.buildenv.2014.09.025 Kazmi, 2016, Generalizable occupant-driven optimization model for domestic hot water production in NZEB, Appl. Energy, 175, 10.1016/j.apenergy.2016.04.108 Cole, 2015, Shifting from net-zero to net-positive energy buildings, Build. Res. Inf., 43, 10.1080/09613218.2014.950452 European Parliament, 2010, Directive 2010/31/EU of the European Parliament and of Council of 19 May 2010 on the energy performance of buildings (recast), Off. J. Eur. Union Daouas, 2016, Impact of external longwave radiation on optimum insulation thickness in Tunisian building roofs based on a dynamic analytical model, Appl. Energy, 177, 10.1016/j.apenergy.2016.05.079 Di Giuseppe, 2015, Assessment of the effectiveness of cool and green roofs for the mitigation of the Heat Island effect and for the improvement of thermal comfort in Nearly Zero Energy Building, Archit. Sci. Rev., 58, 134, 10.1080/00038628.2014.966050 Hernández-Pérez, 2014, Thermal performance of reflective materials applied to exterior building components — a review, Energy Build., 80, 81, 10.1016/j.enbuild.2014.05.008 Castaldo, 2015, Thermal-energy analysis of natural cool stone aggregates as passive cooling and global warming mitigation technique, Urban Clim., 14, 301, 10.1016/j.uclim.2015.05.006 Pisello, 2017, State of the art on the development of cool coatings for buildings and cities, Sol. Energy, 144, 10.1016/j.solener.2017.01.068 Akbari, 2012, Global cooling updates: reflective roofs and pavements, Energy Build., 55, 10.1016/j.enbuild.2012.02.055 Zinzi, 2016, Exploring the potentialities of cool facades to improve the thermal response of Mediterranean residential buildings, Sol. Energy, 135, 386, 10.1016/j.solener.2016.06.021 Antonaia, 2016, Cool materials for reducing summer energy consumptions in Mediterranean climate: in-lab experiments and numerical analysis of a new coating based on acrylic paint, Appl. Therm. Eng., 102, 91, 10.1016/j.applthermaleng.2016.03.111 Samani, 2016, Comparison of passive cooling techniques in improving thermal comfort of occupants of a pre-fabricated building, Energy Build., 120, 30, 10.1016/j.enbuild.2016.03.055 Werle, 2016, The performance of a self-cleaning cool cementitious surface, Energy Build., 114, 200, 10.1016/j.enbuild.2015.06.025 Peron, 2015, An analysis of the urban heat island of Venice mainland, Sustain. Cities Soc., 19, 300, 10.1016/j.scs.2015.05.008 Noro, 2015, Urban heat island in Padua, Italy: simulation analysis and mitigation strategies, Urban Clim., 14, 187, 10.1016/j.uclim.2015.04.004 Park, 2016, Effects of building–roof cooling on the flow and dispersion of reactive pollutants in an idealized urban street canyon, Build. Environ., 109, 175, 10.1016/j.buildenv.2016.09.011 Costanzo, 2016, Energy savings in buildings or UHI mitigation? Comparison between green roofs and cool roofs, Energy Build., 114, 247, 10.1016/j.enbuild.2015.04.053 Zinzi, 2012, Cool and green roofs. An energy and comfort comparison between passive cooling and mitigation urban heat island techniques for residential buildings in the Mediterranean region, Energy Build., 55, 66, 10.1016/j.enbuild.2011.09.024 Stavrakakis, 2016, Experimental and numerical assessment of cool-roof impact on thermal and energy performance of a school building in Greece, Energy Build., 130, 64, 10.1016/j.enbuild.2016.08.047 Li, 2016, Evaluation of cool roof and vegetations in mitigating urban heat island in a tropical city Singapore, Urban Clim., 16, 59, 10.1016/j.uclim.2015.12.002 Zhang, 2016, Revisiting the climate impacts of cool roofs around the globe using an Earth system model, Environ. Res. Lett., 11, 84014, 10.1088/1748-9326/11/8/084014 Gagliano, 2015, A multi-criteria methodology for comparing the energy and environmental behavior of cool, green and traditional roofs, Build. Environ., 90, 71, 10.1016/j.buildenv.2015.02.043 Ferrari, 2015, Design of a cool color glaze for solar reflective tile application, Ceram. Int., 41, 11106, 10.1016/j.ceramint.2015.05.058 Ferrari, 2016, A composite cool colored tile for sloped roofs with high equivalent solar reflectance, Energy Build., 114, 221, 10.1016/j.enbuild.2015.06.062 Levinson, 2007, Cooler tile-roofed buildings with near-infrared-reflective non-white coatings, Build. Environ., 42, 10.1016/j.buildenv.2006.06.005 Levinson, 2007, Methods of creating solar-reflective nonwhite surfaces and their application to residential roofing materials, Sol. Energy Mater. Sol. Cells, 91, 10.1016/j.solmat.2006.06.062 Costanzo, 2013, Cool roofs for passive cooling: performance in different climates and for different insulation levels in Italy, Adv. Build. Energy Res., 7, 155, 10.1080/17512549.2013.865556 Zinzi, 2014, Preliminary studies of a cool roofs’ energy-rating system in Italy, Adv. Build. Energy Res., 8, 84, 10.1080/17512549.2014.890539 Repubblica Italiana - Ministero dello Sviluppo Economico, Decreto interministeriale 26giugno 2015 − Applicazione delle metodologie di calcolo delle prestazioni energetiche e definizione delle prescrizioni e dei requisiti minimi degli edifici (in Italian), 2015. http://www.sviluppoeconomico.gov.it/index.php/it/normativa/decreti-interministeriali/2032966-decreto-interministeriale-26-giugno-2015-applicazione-delle-metodologie-di-calcolo-delle-prestazioni-energetiche-e-definizione-delle-prescrizioni-e-dei-requisiti- (Accessed 1 December 2016). Pisello, 2015, Thermal-physics and energy performance of an innovative green roof system: The Cool-Green Roof, Sol. Energy, 116, 337, 10.1016/j.solener.2015.03.049 ASHRAE, 2016 ASHRAE, 2001 U.S. Department of Energy (DOE), 2016, 1444 Pisello, 2016, Experimental in-lab and in-field analysis of waterproof membranes for cool roof application and urban heat island mitigation, Energy Build., 114, 180, 10.1016/j.enbuild.2015.05.026 Crawley, 2000, Energy plus: energy simulation program, ASHRAE J., 42, 49 Crawley, 2001, EnergyPlus. Creating a new-generation building energy simulation program, Energy Build., 33, 319, 10.1016/S0378-7788(00)00114-6 Guide for Module Developers Everything You Need to Know about Developing Modules and Modifying EnergyPlus, October. (2010). Crawley, 2008, Contrasting the capabilities of building energy performance simulation programs, Build. Environ., 43, 661, 10.1016/j.buildenv.2006.10.027 New, 2016, Comparison of software models for energy savings from cool roofs, Energy Build., 114, 130, 10.1016/j.enbuild.2015.06.020 Hosseini, 2017, Energy performance of cool roofs under the impact of actual weather data, Energy Build., 145, 284, 10.1016/j.enbuild.2017.04.006 Perez, 1990, Modeling daylight availability and irradiance components from direct and global irradiance, Sol. Energy, 44, 10.1016/0038-092X(90)90055-H Perez, 1992, Dynamic global-to-direct irradiance conversion models Wetter, 2000, Design optimization with GenOpt, Build. Energy Simul. User News, 21, 19 Evins, 2013, A review of computational optimisation methods applied to sustainable building design, Renew. Sustain. Energy Rev., 22, 230, 10.1016/j.rser.2013.02.004 Pisello, 2012, A method for assessing buildings’ energy efficiency by dynamic simulation and experimental activity, Appl. Energy, 97, 419, 10.1016/j.apenergy.2011.12.094 Decree DPR 412/93 − Regolamento recante norme per la progettazione, l’installazione, l’esercizio e la manutenzione degli impianti termici degli edifici ai fini del contenimento dei consumi di energia, in attuazione dell’art. 4, comma 4, della L. 9 gennaio, 1993. http://efficienzaenergetica.acs.enea.it/doc/dpr412-93.pdf (Accessed 2 December 2016). Kottek, 2006, World map of the Köppen-Geiger climate classification updated, Meteorol. Zeitschrift., 15, 259, 10.1127/0941-2948/2006/0130 U.S. Department of Energy’s (DOE) Building Technologies Office (BTO), EnergyPlus − Weather Data, (2016). https://energyplus.net/weather (Accessed 12 December 2016). Luce-Gas, The Italian climate zones (in Italian), (n.d.). http://luce-gas.it/informazioni-pratiche/termini-tecnici/zone-climatiche-italia (Accessed 29 November 2016). Energy.gov, Office of Energy Efficiency & Renewable Energy, Commercial Reference Buildings, (2013). https://energy.gov/eere/buildings/commercial-reference-buildings (Accessed 13 January 2017). Arnold, 1999 EPISCOPE, EE Project TABULA: Typology Approach for Building Stock Energy Assessment, 2009–2012, (2012). http://episcope.eu/iee-project/tabula/ (Accessed 17 November 2016). Pisello, 2014, The thermal effect of an innovative cool roof on residential buildings in Italy: results from two years of continuous monitoring, Energy Build., 69, 154, 10.1016/j.enbuild.2013.10.031 Barozzi, 2016, Assessment of the impact of cool roofs in temperate climates through a comparative experimental campaign in outdoor test cells, Buildings, 6, 10.3390/buildings6040052 Romeo, 2013, Impact of a cool roof application on the energy and comfort performance in an existing non-residential building. A Sicilian case study, Energy Build., 67, 647, 10.1016/j.enbuild.2011.07.023