Explosion induced dynamic responses of blast wall on FPSO topside: Blast loading application methods

API, 2006 Brill, 2012, A method for measuring the impulse on structural foundations due to a blast wave, Int. J. Impact Eng., 49, 214, 10.1016/j.ijimpeng.2012.02.009 Chille, 2008, 13 Chung Kim Yuen, 2005, Experimental and numerical studies on the response of quadrangular stiffened plates. Part 1: subjected to uniform blast load, Int. J. Impact Eng., 31, 55, 10.1016/j.ijimpeng.2003.09.048 Dan, 2014, Quantitative risk analysis of fire and explosion on the top-side LNG-liquefaction process of LNG-FPSO, Process Saf. Environ. Prot., 92, 430, 10.1016/j.psep.2014.04.011 Friebe, 2014, A parametric study on the use of passive fire protection in FPSO topside module, Int. J. Nav. Archit. Ocean Eng., 6, 826, 10.2478/IJNAOE-2013-0216 Geng, 2015, Blast wave clearing behavior for positive and negative phases, J. Loss Prev. Process Indus., 37, 143, 10.1016/j.jlp.2014.10.018 Gexcon, 2014 Guo, 2015, Effect of ignition position on vented hydrogen-air explosions, Int. J. Hydrogen Energy, 1 Hansen, 2010, Validation of FLACS against experimental data sets from the model evaluation database for LNG vapor dispersion, J. Loss Prev. Process Indus., 23, 857, 10.1016/j.jlp.2010.08.005 Hansen, 2015, Improved far-field blast predictions from fast deflagrations, DDTs and detonations of vapour clouds using FLACS CFD, J. Loss Prev. Process Indus., 35, 293, 10.1016/j.jlp.2014.11.005 Health & Safety Executive, 2006, Structural strengthening of offshore topsides structures as part of explosion risk reduction methods, Res. Rep., 489, 9 Kang, 2016, Dynamic response of structural model according to characteristics of gas explosion topside platform, Ocean Eng., 113, 174, 10.1016/j.oceaneng.2015.12.043 Kauthammer, 2000, Negative phase effects on glass panels, Int. J. Impact Eng., 24, 1, 10.1016/S0734-743X(99)00043-3 Langdon, 2006, Deformation and failure of profiled stainless steel blast wall panels. Part Ⅲ: finite element simulations and overall summary, Int. J. Impact Eng., 32, 988, 10.1016/j.ijimpeng.2004.08.002 Louca, 2008, Improving the ductile behaviour of offshore topside structures under extreme loads, Eng. Struct., 30, 506, 10.1016/j.engstruct.2007.04.020 Livermore Software Technology Corporation (LSTC), 2007 Mazurkiewicz, 2015, Blast loading influence on load carrying capacity of I-column, Eng. Struct., 104, 107, 10.1016/j.engstruct.2015.09.025 Moghimi, 2015, Performance assessment of steel plate shear walls under accidental blast loads, J. Constr. Steel Res., 106, 44, 10.1016/j.jcsr.2014.11.010 Nguyen, 2011, Response of vertical wall structures under blast loading by dynamic analysis, Procedia Eng., 14, 3308, 10.1016/j.proeng.2011.07.418 Rigby, 2014, Elastic–plastic response of plates subjected to cleared blast loads, Int. J. Impact Eng., 66, 37, 10.1016/j.ijimpeng.2013.12.006 Schleyer, 2005, Inelastic deformation and failure of progiled stainless steel blast wall panels. Part II: analytical modelling considerations, Int. J. Impact Eng., 31, 371, 10.1016/j.ijimpeng.2003.12.011 Stolz, 2014, Dynamic bearing capacity of ductile concrete plates under blast loading, Int. J. Impact Eng., 69, 25, 10.1016/j.ijimpeng.2014.02.008 UKOOA, 2003 Yanlin, 2015, Probabilistic fire risk analysis and structural safety assessment of FPSO topside module, Ocean Eng., 104, 725, 10.1016/j.oceaneng.2015.04.019 Zheng, 2015, Simulation of the load evolution of an anchoring system under a blasting impulse load using FLAC3D, Shock Vib., 2015, 8