Review of databases and predictive methods for pressure drop in adiabatic, condensing and boiling mini/micro-channel flows

Mudawar, 2001, Assessment of high-heat-flux thermal management schemes, IEEE Trans-CPMT: Compon. Packag. Technol., 24, 122 Mudawar, 2011, Two-phase micro-channel heat sinks: theory, applications and limitations, J. Electron. Packag.-Trans. ASME, 133, 041002-2, 10.1115/1.4005300 Anderson, 1989, Microelectronic cooling by enhanced pool boiling of a dielectric fluorocarbon liquid, J. Heat Transfer – Trans. ASME, 111, 752, 10.1115/1.3250747 Mudawar, 1997, An analytical model for near-saturated pool boiling CHF on vertical surfaces, Int. J. Heat Mass Transfer, 40, 2327, 10.1016/S0017-9310(96)00298-0 Mudawar, 1989, Critical heat flux in subcooled flow boiling of fluorocarbon liquid on a simulated chip in a rectangular channel, Int. J. Heat Mass Transfer, 32, 379, 10.1016/0017-9310(89)90184-1 Willingham, 1992, Forced-convection boiling and critical heat flux from a linear array of discrete heat sources, Int. J. Heat Mass Transfer, 35, 2879, 10.1016/0017-9310(92)90308-F Tran, 1996, Small circular- and rectangular-channel boiling with two refrigerants, Int. J. Multiphase Flow, 22, 485, 10.1016/0301-9322(96)00002-X Lee, 2001, Heat transfer correlation for boiling flows in small rectangular horizontal channels with low aspect ratios, Int. J. Multiphase Flow, 27, 2043, 10.1016/S0301-9322(01)00054-4 Katto, 1973, Study of the mechanism of burn-out in boiling system of high burn-out heat flux, Bull. JSME, 16, 1357, 10.1299/jsme1958.16.1357 Monde, 1991, Critical heat flux in saturated forced convective boiling on a heated disk with multiple impinging jets, J. Heat Transfer – Trans. ASME, 113, 722, 10.1115/1.2910623 Wadsworth, 1992, Enhancement of single-phase heat transfer and critical heat flux from an ultra-high-flux-source to a rectangular impinging jet of dielectric liquid, J. Heat Transfer – Trans. ASME, 114, 764, 10.1115/1.2911348 Johns, 1996, An ultra-high power two-phase jet-impingement avionic clamshell module, J. Electron. Packag.-Trans. ASME, 118, 264, 10.1115/1.2792162 Toda, 1972, A study in mist cooling (1st report: investigation of mist cooling), Trans. JSME, 38, 581, 10.1299/kikai1938.38.581 Lin, 2003, Heat transfer characteristics of spray cooling in a closed loop, Int. J. Heat Mass Transfer, 46, 3737, 10.1016/S0017-9310(03)00217-5 Visaria, 2008, Theoretical and experimental study of the effects of spray orientation on two-phase spray cooling and critical heat flux, Int. J. Heat Mass Transfer, 51, 2398, 10.1016/j.ijheatmasstransfer.2007.08.010 Marto, 1982, Pool boiling heat transfer from enhanced surfaces to dielectric fluids, J. Heat Transfer – Trans. ASME, 104, 292, 10.1115/1.3245086 W. Nakayama, T. Nakajima, S. Hirasawa, Heat sink studs having enhanced boiling surfaces for cooling of microelectronic components, ASME Paper 84-WA/HT-89, 1984. Webb, 1981, The evolution of enhanced surface geometries for nucleate boiling, Heat Transfer Eng., 2, 46, 10.1080/01457638108962760 Khanikar, 2009, Effects of carbon nanotube coating on flow boiling in a micro-channel, Int. J. Heat Mass Transfer, 52, 3805, 10.1016/j.ijheatmasstransfer.2009.02.007 Sung, 2006, Experimental and numerical investigation of single-phase heat transfer using a hybrid jet-impingement/micro-channel cooling scheme, Int. J. Heat Mass Transfer, 49, 682, 10.1016/j.ijheatmasstransfer.2005.08.021 Sung, 2006, Correlation of critical heat flux in hybrid jet impingement/micro-channel cooling scheme, Int. J. Heat Mass Transfer, 49, 2663, 10.1016/j.ijheatmasstransfer.2006.01.008 Mudawar, 1985, Boiling heat transfer and critical heat flux in high-speed rotating liquid films, Int. J. Heat Mass Transfer, 28, 795, 10.1016/0017-9310(85)90230-3 Sturgis, 1999, Assessment of CHF enhancement mechanisms in a curved, rectangular channel subjected to concave heating, J. Heat Transfer – Trans. ASME, 121, 394, 10.1115/1.2825992 Ornatskii, 1965, Heat transfer crisis in a forced flow of underheated water in small-bore tubes, Teplofizika Vysokikh Temperatur, 3, 444 Hall, 1999, Ultra-high critical heat flux (CHF) for subcooled water flow boiling – II: High-CHF database and design parameters, Int. J. Heat Mass Transfer, 42, 1429, 10.1016/S0017-9310(98)00242-7 Jimenez, 1994, A multi-kilowatt immersion-cooled standard electronic clamshell module for future aircraft avionics, J. Electron. Packag. – Trans. ASME, 116, 220, 10.1115/1.2905689 LaClair, 2000, Thermal transients in a capillary evaporator prior to the initiation of boiling, Int. J. Heat Mass Transfer, 43, 3937, 10.1016/S0017-9310(00)00042-9 Mudawar, 2009, Two-phase spray cooling of hybrid vehicle electronics, IEEE Trans. – Compon. Packag. Manuf. Technol., 32, 501, 10.1109/TCAPT.2008.2006907 I. Mudawar, Micro-channel heat exchangers for metal hydride hydrogen storage systems, US Provisional Patent Application No. 61/184,595, 2009. Bowers, 1994, High flux boiling in low flow rate, low pressure drop mini-channel and micro-channel heat sinks, Int. J. Heat Mass Transfer, 37, 321, 10.1016/0017-9310(94)90103-1 Qu, 2003, Measurement and prediction of pressure drop in two-phase micro-channel heat sinks, Int. J. Heat Mass Transfer, 46, 2737, 10.1016/S0017-9310(03)00044-9 Gan, 2008, Are the available boiling heat transfer coefficients suitable for silicon microchannel heat sinks?, Microfluids Nanofluids, 4, 575, 10.1007/s10404-007-0215-y Wu, 2004, Boiling instability in parallel silicon microchannels at different heat flux, Int. J. Heat Mass Transfer, 47, 3631, 10.1016/j.ijheatmasstransfer.2004.04.012 Wang, 2008, Effects of inlet/outlet configurations on flow boiling instability in parallel microchannels, Int. J. Heat Mass Transfer, 51, 2267, 10.1016/j.ijheatmasstransfer.2007.08.027 Jiang, 1999, Phase change in microchannel heat sinks with integrated temperature sensors, J. Microelectromech. Syst., 8, 358, 10.1109/84.809049 Kim, 2012, Flow condensation in parallel micro-channels – Part 1: Experimental results and assessment of pressure drop correlations, Int. J. Heat Mass Transfer, 55, 971, 10.1016/j.ijheatmasstransfer.2011.10.013 Kim, 2012, Flow condensation in parallel micro-channels – Part 2: Heat transfer results and correlation technique, Int. J. Heat Mass Transfer, 55, 984, 10.1016/j.ijheatmasstransfer.2011.10.012 D.K. Hinde, M.K. Dobson, J.C. Chato, M.E. Mainland, N. Rhines, Condensation of refrigerants 12 and 134a in horizontal tubes with and without oil, Report No. ACRC TR-26, Air Conditioning and Refrigeration Center, University of Illinois at Urbana-Champaign, 1992. Wambsganss, 1992, Frictional pressure gradients in two-phase flow in a small horizontal rectangular channel, Exp. Therm. Fluid Sci., 5, 40, 10.1016/0894-1777(92)90055-A Fujita, 1995, Gas-liquid flows in flat channels with small channel clearance, Adv. Multiphase Flow, 441 H. Hirofumi, R.L. Webb, Condensation in extruded aluminum tubes, Penn State Research Report, Showa Aluminum Corporation, 1995. Yang, 1996, Friction pressure drop of R-12 in small hydraulic diameter extruded aluminum tubes with and without micro-fins, Int. J. Heat Mass Transfer, 39, 801, 10.1016/0017-9310(95)00151-4 Triplett, 1999, Gas–liquid two-phase flow in microchannels – Part II: void fraction and pressure drop, Int. J. Multiphase Flow, 25, 395, 10.1016/S0301-9322(98)00055-X Bao, 2000, An experimental study of gas–liquid flow in a narrow conduit, Int. J. Heat Mass Transfer, 43, 2313, 10.1016/S0017-9310(99)00297-5 J.W. Coleman, Flow visualization and pressure drop for refrigerant phase change and air-water flow in small hydraulic diameter geometries (Ph.D. thesis), Iowa State University, IA, 2000. Wang, 2001, Two-phase flow resistance of refrigerants R-22, R-410A and R-407C in small diameter tubes, Trans. IChemE, 79, 553, 10.1205/02638760152424325 Zhang, 2001, Correlation of two-phase friction for refrigerants in small-diameter tubes, Exp. Therm. Fluid Sci., 25, 131, 10.1016/S0894-1777(01)00066-8 V.G. Nino, P.S. Hrnjak, T.A. Newell, Characterization of two-phase flow in microchannels, Report No. ACRC TR-202, Air Conditioning and Refrigeration Center, University of Illinois at Urbana-Champaign, 2002. D.C. Adams, P.S. Hrnjak, T.A. Newell, Pressure drop and void fraction in microchannels using carbon dioxide, ammonia, and R245fa as refrigerants, Report No. ACRC TR-221, Air Conditioning and Refrigeration Center, University of Illinois at Urbana-Champaign, 2003. C.A. Monroe, T.A. Newell, J.C. Chato, An experimental investigation of pressure drop and heat transfer in internally enhanced aluminum microchannels, Report No. ACRC TR-213, Air Conditioning and Refrigeration Center, University of Illinois at Urbana-Champaign, 2003. K.K. Pehlivan, Experimental study on two-phase flow regimes and frictional pressure drop in mini- and micro-channels (MS thesis), Concordia University, Canada, 2003. J. Jang, P.S. Hrnjak, Condensation of CO2 at low temperature, Report No. ACRC CR-56, Air Conditioning and Refrigeration Center, University of Illinois at Urbana-Champaign, 2004. J.S. Shin, A study of flow condensation heat transfer inside mini-channels with new experimental techniques (Ph.D. thesis), Pohang University of Science and Technology, Korea, 2004. X. Tu, P.S. Hrnjak, Flow and heat transfer in microchannels 30 to 300microns in hydraulic diameter, Report No. ACRC CR-53, Air Conditioning and Refrigeration Center, University of Illinois at Urbana-Champaign, 2004. Cavallini, 2005, Two-phase frictional pressure gradient of R236ea, R134a, and R410A inside multi-port mini-channels, Exp. Therm. Fluid Sci., 29, 861, 10.1016/j.expthermflusci.2005.03.012 Chen, 2005, Influence of oil on R-410A two-phase frictional pressure drop in a small U-type wavy tube, Int. Commun. Heat Mass Transfer, 32, 797, 10.1016/j.icheatmasstransfer.2004.10.008 B. Mitra, Supercritical gas cooling and condensation of refrigerant R410A at near-critical pressures (Ph.D. thesis), Georgia Institute of Technology, GA, 2005. U.C. Andresen, Supercritical gas cooling and near-critical-pressure condensation of refrigerant blends in microchannels (Ph.D. thesis), Georgia Institute of Technology, GA, 2006. English, 2006, An experimental investigation into the effect of surfactants on air-water two-phase flow in minichannels, Heat Transfer Eng., 27, 99, 10.1080/01457630500523980 Hwang, 2006, The pressure drop in microtubes and the correlation development, Int. J. Heat Mass Transfer, 49, 1804, 10.1016/j.ijheatmasstransfer.2005.10.040 Yun, 2006, Evaporative heat transfer and pressure drop of R410A in microchannels, Int. J. Refrig., 29, 92, 10.1016/j.ijrefrig.2005.08.005 B.S. Field, P.S. Hrnjak, Two-phase pressure drop and flow regime of refrigerants and refrigerant-oil mixtures in small channels, Report No. ACRC TR-261, Air Conditioning and Refrigeration Center, University of Illinois at Urbana-Champaign, 2007. C.Y. Park, P.S. Hrnjak, Carbon dioxide and R410A flow boiling heat transfer, pressure drop and flow pattern in horizontal tubes at low temperatures, Report No. ACRC TR-258, Air Conditioning and Refrigeration Center, University of Illinois at Urbana-Champaign, 2007. Revellin, 2007, Adiabatic two-phase frictional pressure drops in microchannels, Exp. Therm. Fluid Sci., 31, 673, 10.1016/j.expthermflusci.2006.07.001 Yue, 2007, Hydrodynamics and mass transfer characteristics in gas–liquid flow through a rectangular microchannel, Chem. Eng. Sci., 62, 2096, 10.1016/j.ces.2006.12.057 Quan, 2008, An experimental investigation on pressure drop of steam condensing in silicon microchannels, Int. J. Heat Mass Transfer, 51, 5454, 10.1016/j.ijheatmasstransfer.2008.03.028 Dutkowski, 2009, Two-phase pressure drop of air-water in minichannels, Int. J. Heat Mass Transfer, 52, 5185, 10.1016/j.ijheatmasstransfer.2009.04.018 K.A. Marak, Condensation heat transfer and pressure drop for methane and binary methane fluids in small channels (Ph.D. thesis), Norwegian University of Science and Technology, Norway, 2009. Park, 2009, CO2 flow condensation heat transfer and pressure drop in multi-port microchannels at low temperatures, Int. J. Refrig., 32, 1129, 10.1016/j.ijrefrig.2009.01.030 Huang, 2010, Two-phase frictional pressure drop characteristics of R410A-oil mixture flow condensation inside 4.18mm and 1.6mm i.d. horizontal smooth tubes, HVAC&R Res., 16, 453, 10.1080/10789669.2010.10390915 Choi, 2011, Adiabatic two-phase flow in rectangular microchannels with different aspect ratios – Part I: Flow pattern, pressure drop and void fraction, Int. J. Heat Mass Transfer, 54, 616, 10.1016/j.ijheatmasstransfer.2010.07.067 Ducoulombier, 2011, Carbon dioxide flow boiling in a single microchannel – Part I: Pressure drops, Exp. Therm. Fluid Sci., 35, 581, 10.1016/j.expthermflusci.2010.12.010 Tibiriçá, 2011, Two-phase frictional pressure drop and flow boiling heat transfer for R245fa in a 2.32-mm tube, Heat Transfer Eng., 32, 1139, 10.1080/01457632.2011.562725 A.M. Lezzi, A. Niro, G.P. Beretta, Experimental data on CHF for forced convection water boiling in long horizontal capillary tubes, in: Proc. 10th Int. Heat Transfer Conf., UK, 7, 1994, pp. 491–496. T.N. Tran, Pressure drop and heat transfer study of two-phase flow in small channels (Ph.D. thesis), Texas Tech University, TX, 1998. J. Pettersen, Flow vaporization of CO2 in microchannel tubes (Ph.D. thesis), Norwegian University of Science and Technology, Norway, 2002. X. Huo, Experimental study of flow boiling heat transfer in small diameter tubes (Ph.D. thesis), London South Bank University, UK, 2005. Lee, 2005, Two-phase flow in high-heat-flux micro-channel heat sink for refrigeration cooling applications – Part I: pressure drop characteristics, Int. J. Heat Mass Transfer, 48, 928, 10.1016/j.ijheatmasstransfer.2004.09.018 W. Owhaib, C. Martín-Callizo, B. Palm, Two-phase flow pressure drop of R-134A in a vertical circular mini/micro channel, in: ASME Sixth Int. Conf. on Nanochannels, Microchannels, and Minichannels, Germany, ICNMM2008-62243, 2008, pp. 343–353. Hu, 2009, Pressure drop during horizontal flow boiling of R410A/oil mixture in 5mm and 3mm smooth tubes, Appl. Therm. Eng., 29, 3353, 10.1016/j.applthermaleng.2009.05.011 Quibén, 2009, Flow boiling in horizontal flattened tubes – Part I: Two-phase frictional pressure drop results and model, Int. J. Heat Mass Transfer, 52, 3634, 10.1016/j.ijheatmasstransfer.2008.12.032 M. Ducoulombier, Ebullition convective du dioxyde de carbone – étude expérimentale en micro-canal (Ph.D. thesis), Institut National des Sciences Appliquées (INSA) de Lyon, France, 2010. Tibiriçá, 2011, Experimental investigation of flow boiling pressure drop of R134A in a microscale horizontal smooth tube, J. Therm. Sci. Eng. Appl. – Trans. ASME, 3, 011006, 10.1115/1.4003728 Wu, 2011, Investigation of heat transfer and pressure drop of CO2 two-phase flow in a horizontal minichannel, Int. J. Heat Mass Transfer, 54, 2154, 10.1016/j.ijheatmasstransfer.2010.12.009 Kharangate, 2012, Experimental and theoretical study of critical heat flux in vertical upflow with inlet vapor void, Int. J. Heat Mass Transfer, 55, 360, 10.1016/j.ijheatmasstransfer.2011.09.028 Maqbool, 2012, Flow boiling of ammonia in vertical small diameter tubes: two phase frictional pressure drop results and assessment of prediction methods, Int. J. Therm. Sci., 54, 1, 10.1016/j.ijthermalsci.2011.11.018 McAdams, 1942, Vaporization inside horizontal tubes – II: Benzene–oil mixture, Trans. ASME, 64, 193 Akers, 1958, Condensing heat transfer within horizontal tubes, Chem. Eng. Prog., 54, 89 Cicchitti, 1960, Two-phase cooling experiments-pressure drop, heat transfer and burnout measurements, Energia Nucleare, 7, 407 Owens, 1961, Pt. II Dukler, 1964, Pressure drop and hold up in two-phase flow, AIChE J., 10, 38, 10.1002/aic.690100117 Beattie, 1982, A simple two-phase frictional pressure drop calculation method, Int. J. Multiphase Flow, 8, 83, 10.1016/0301-9322(82)90009-X Lin, 1991, Local frictional pressure drop during vaporization of R-12 through capillary tubes, Int. J. Multiphase Flow, 17, 95, 10.1016/0301-9322(91)90072-B Lockhart, 1949, Proposed correlation of data for isothermal two-phase, two-component flow in pipes, Chem. Eng. Prog., 45, 39 L. Friedel, Improved friction pressure drop correlations for horizontal and vertical two-phase pipe flow, European Two-Phase Group Meeting, Ispra, Italy, 1979, Paper E2. Müller-Steinhagen, 1986, A simple friction pressure drop correlation for two-phase flow in pipes, Chem. Eng. Process., 20, 297, 10.1016/0255-2701(86)80008-3 Jung, 1989, Prediction of pressure drop during horizontal annular flow boiling of pure and mixed refrigerants, Int. J. Heat Mass Transfer, 32, 2435, 10.1016/0017-9310(89)90203-2 Wang, 1997, Visual observation of two-phase flow pattern of R-22, R-134a, and R-407C in a 6.5-mm smooth tube, Exp. Therm. Fluid Sci., 15, 395, 10.1016/S0894-1777(97)00007-1 Mishima, 1996, Some characteristics of air–water two-phase flow in small diameter vertical tubes, Int. J. Multiphase Flow, 22, 703, 10.1016/0301-9322(96)00010-9 Yan, 1998, Evaporation heat transfer and pressure drop of refrigerant R-134a in a small pipe, Int. J. Heat Mass Transfer, 41, 4183, 10.1016/S0017-9310(98)00127-6 Yan, 1999, Condensation heat transfer and pressure drop of refrigerant R-134a in a small pipe, Int. J. Heat Mass Transfer, 42, 697, 10.1016/S0017-9310(98)00195-1 Tran, 2000, Two-phase pressure drop of refrigerants during flow boiling in small channels: an experimental investigation and correlation development, Int. J. Multiphase Flow, 26, 1739, 10.1016/S0301-9322(99)00119-6 Chen, 2001, Two-phase pressure drop of air-water and R-410A in small horizontal tubes, Int. J. Multiphase Flow, 27, 1293, 10.1016/S0301-9322(01)00004-0 Lee, 2001, Pressure drop correlations for two-phase flow within horizontal rectangular channels with small heights, Int. J. Multiphase Flow, 27, 783, 10.1016/S0301-9322(00)00050-1 Yu, 2002, Two-phase pressure drop, boiling heat transfer, and critical heat flux to water in a small-diameter horizontal tube, Int. J. Multiphase Flow, 28, 927, 10.1016/S0301-9322(02)00019-8 Sun, 2009, Evaluation analysis of prediction methods for two-phase flow pressure drop in mini-channels, Int. J. Multiphase Flow, 35, 47, 10.1016/j.ijmultiphaseflow.2008.08.003 Li, 2010, A general correlation for adiabatic two-phase pressure drop in micro/mini-channels, Int. J. Heat Mass Transfer, 53, 2732, 10.1016/j.ijheatmasstransfer.2010.02.029 Zhang, 2010, Correlations of two-phase frictional pressure drop and void fraction in mini-channel, Int. J. Heat Mass Transfer, 53, 453, 10.1016/j.ijheatmasstransfer.2009.09.011 Li, 2011, Generalized adiabatic pressure drop correlations in evaporative micro/mini-channels, Exp. Therm. Fluid Sci., 35, 866, 10.1016/j.expthermflusci.2010.07.005 Bowers, 1994, Two-phase electronic cooling using mini-channel and micro-channel heat sinks – Part 2: Flow rate and pressure drop constraints, J. Electron. Packag. – Trans. ASME, 116, 298, 10.1115/1.2905701 Bergles, 1977, Review of instability in two-phase systems, vol. 1, 383 Yadigaroglu, 1981, Two-phase flow instabilities and propagation phenomena, 353 Zivi, 1964, Estimation of steady-state steam void-fraction by means of the principle of minimum entropy production, J. Heat Transfer – Trans. ASME, 86, 247, 10.1115/1.3687113 Incropera, 2002 Shah, 1978, Suppl. 1 Kim, 2012, Universal approach to predicting two-phase frictional pressure drop for adiabatic and condensing mini/micro-channel flows, Int. J. Heat Mass Transfer, 55, 3246, 10.1016/j.ijheatmasstransfer.2012.02.047 Kim, 2013, Universal approach to predicting two-phase frictional pressure drop for mini/micro-channel saturated flow boiling, Int. J. Heat Mass Transfer, 58, 718, 10.1016/j.ijheatmasstransfer.2012.11.045 Kim, 2013, Universal approach to predicting heat transfer coefficient for condensing mini/micro-channel flows, Int. J. Heat Mass Transfer, 56, 238, 10.1016/j.ijheatmasstransfer.2012.09.032 Kim, 2013, Universal approach to predicting saturated flow boiling heat transfer in mini/micro-channels – Part II: Two-phase heat transfer coefficient, Int. J. Heat Mass Transfer, 64, 1239, 10.1016/j.ijheatmasstransfer.2013.04.014 Kim, 2013, Universal approach to predicting saturated flow boiling heat transfer in mini/micro-channels – Part I: Dryout incipience quality, Int. J. Heat Mass Transfer, 64, 1226, 10.1016/j.ijheatmasstransfer.2013.04.016 Hall, 2000, Critical heat flux (CHF) for water flow in tubes – I: Compilation and assessment of world CHF data, Int. J. Heat Mass Transfer, 43, 2573, 10.1016/S0017-9310(99)00191-X Hall, 2000, Critical heat flux (CHF) for water flow in tubes – II: Subcooled CHF correlations, Int. J. Heat Mass Transfer, 43, 2605, 10.1016/S0017-9310(99)00192-1 Baroczy, 1965, Correlation of liquid fraction in two-phase flow with applications to liquid metals, Chem. Eng. Prog., 61, 179 Rouhani, 1970, Calculation of void volume fraction in the subcooled and quality boiling region, Int. J. Heat Mass Transfer, 13, 393, 10.1016/0017-9310(70)90114-6 E.W. Lemmon, M.L. Huber, M.O. McLinden, Reference fluid thermodynamic and transport properties, REFPROP Version 8.0, NIST, MD, 2007. Woldesemayat, 2007, Comparison of void fraction correlations for different flow patterns in horizontal and upward inclined pipes, Int. J. Multiphase Flow, 33, 347, 10.1016/j.ijmultiphaseflow.2006.09.004 Soliman, 1986, The mist-annular transition during condensation and its influence on the heat transfer mechanism, Int. J. Multiphase Flow, 12, 277, 10.1016/0301-9322(86)90030-3 E.S. AL-Hajri, Prediction of heat transfer and pressure drop of condensing refrigerant flow in a high aspect ratio micro-channels (Ph.D. thesis), University of Maryland, College Park, MD, 2009. Megahed, 2009, Two-phase pressure drop and flow visualization of FC-72 in a silicon microchannel heat sink, Int. J. Heat Fluid Flow, 30, 1171, 10.1016/j.ijheatfluidflow.2009.07.006 R. Revellin, Experimental two-phase fluid flow in microchannels (Ph.D. thesis), École Polytechnique Fédérale de Lausanne, France, 2006. Chen, 2006, The effect of tube diameter on vertical two-phase flow regimes in small tubes, Int. J. Heat Mass Transfer, 49, 4220, 10.1016/j.ijheatmasstransfer.2006.03.025 Karayiannis, 2012, A study of discrepancies in flow boiling results in small to microdiameter metallic tubes, Exp. Therm. Fluid Sci., 36, 126, 10.1016/j.expthermflusci.2011.09.005 Qu, 2006, Experimental and computational investigation of flow development and pressure drop in a rectangular micro-channel, J. Electron. Packag. – Trans. ASME, 128, 1, 10.1115/1.2159002 Koskie, 1989, Parallel-wire probes for measurement of thick liquid films, Int. J. Multiphase Flow, 15, 521, 10.1016/0301-9322(89)90051-7 Mudawar, 1993, Measurement of mass and momentum transport in wavy-laminar falling liquid films, Int. J. Heat Mass Transfer, 36, 4151, 10.1016/0017-9310(93)90077-J