Two-phase flow condensation pressure drop of R14 in a horizontal tube: Experimental investigation and correlation development

Skye, 2012, Empirically tuned model for a precooled MGJT cryoprobe, Cryogenics, 52, 590, 10.1016/j.cryogenics.2012.08.004 Wang, 2018, Thermodynamic design and analysis of movable small scale mixed-refrigerant liquid nitrogen generators, Int. J. Refrig, 90, 202, 10.1016/j.ijrefrig.2018.04.010 Wang, 2017, Performance comparison of single-stage mixed-refrigerant Joule-Thomson cycle and pure-gas reverse Brayton cycle at fixed-temperatures from 80 to 180 K, Int. J. Refrig, 80, 77, 10.1016/j.ijrefrig.2017.05.011 Gong, 2002 Lee, 2017, Design of non-flammable mixed refrigerant Joule-Thomson refrigerator for precooling stage of high temperature superconducting power cable, Cryogenics, 81, 14, 10.1016/j.cryogenics.2016.11.003 Carey, 1992 Yan, 1999, Condensation heat transfer and pressure drop of refrigerant R-134a in a small pipe, Int. J. Heat Mass Transfer, 42, 697, 10.1016/S0017-9310(98)00195-1 Cavallini, 2001, Experimental investigation on condensation heat transfer and pressure drop of new HFC refrigerants (R134a, R125, R32, R410A, R236ea) in a horizontal smooth tube, Int. J. Refrig, 24, 73, 10.1016/S0140-7007(00)00070-0 Moreno Quibén, 2007, Flow pattern based two-phase frictional pressure drop model for horizontal tubes. Part I: Diabatic and adiabatic experimental study, Int. J. Heat Fluid Flow, 28, 1049, 10.1016/j.ijheatfluidflow.2007.01.003 Manavela Chiapero, 2014, Experimental results on boiling heat transfer coefficient, frictional pressure drop and flow patterns for R134a at a saturation temperature of 34 °C, Int. J. Refrig, 40, 317, 10.1016/j.ijrefrig.2013.11.026 Charnay, 2015, Discussion on the validity of prediction tools for two-phase flow pressure drops from experimental data obtained at high saturation temperatures, Int. J. Refrig, 54, 98, 10.1016/j.ijrefrig.2015.02.014 Xu, 2016, An experimental study of flow boiling frictional pressure drop of R134a and evaluation of existing correlations, Int. J. Heat Mass Transf., 98, 150, 10.1016/j.ijheatmasstransfer.2016.03.018 Rahman, 2017, Experimental investigation of condensation heat transfer and adiabatic pressure drop characteristics inside a microfin and smooth tube, Int. J. Air-Conditioning Refrig., 25, 1750027, 10.1142/S2010132517500274 Rossato, 2017, Heat transfer and pressure drop during condensation of low-GWP refrigerants inside bar-and-plate heat exchangers, Int. J. Heat Mass Transf., 114, 363, 10.1016/j.ijheatmasstransfer.2017.06.011 Wang, 2017, Frictional pressure drop during steam stratified condensation flow in vacuum horizontal tube, Int. J. Heat Mass Transf., 115, 979, 10.1016/j.ijheatmasstransfer.2017.08.088 Rahman, 2017, Comparison and development of new correlation for adiabatic two-phase pressure drop of refrigerant flowing inside a multiport minichannel with and without fins, Int. J. Refrig., 82, 119, 10.1016/j.ijrefrig.2017.06.001 Lockhart, 1949, Proposed correlation of data for isothermal two-phase, two-component flow in a pipe, Chem. Eng. Prog. Symp., 45, 39 Chisholm, 1967, A theoretical basis for lockhart-martinelli correlation for 2-phase flow, Int. J. Heat Mass Transf., 10, 1767, 10.1016/0017-9310(67)90047-6 Mishima, 1996, Some characteristics of air-water two-phase flow in small diameter vertical tubes, international, J. Multiphase Flow, 22, 703, 10.1016/0301-9322(96)00010-9 Zhang, 2010, Correlations of two-phase frictional pressure drop and void fraction in mini-channel, Int. J. Heat Mass Transf., 53, 453, 10.1016/j.ijheatmasstransfer.2009.09.011 Lee, 2005, Two-phase flow in high-heat-flux micro-channel heat sink for refrigeration cooling applications: Part I––pressure drop characteristics, Int. J. Heat Mass Transf., 48, 928, 10.1016/j.ijheatmasstransfer.2004.09.018 Chen, 2017, Two-phase flow boiling frictional pressure drop of liquid nitrogen in horizontal circular mini-tubes: Experimental investigation and comparison with correlations, Cryogenics, 83, 85, 10.1016/j.cryogenics.2017.03.002 Sun, 2009, Evaluation analysis of prediction methods for two-phase flow pressure drop in mini-channels, Int. J. Multiph. Flow, 35, 47, 10.1016/j.ijmultiphaseflow.2008.08.003 Li, 2010, A general correlation for adiabatic two-phase pressure drop in micro/mini-channels, Int. J. Heat Mass Transf., 53, 2732, 10.1016/j.ijheatmasstransfer.2010.02.029 López-Belchí, 2014, Experimental condensing two-phase frictional pressure drop inside mini-channels. Comparisons and new model development, Int. J. Heat Mass Transfer, 75, 581, 10.1016/j.ijheatmasstransfer.2014.04.003 Macdonald, 2016, Hydrocarbon condensation in horizontal smooth tubes: Part II – Heat transfer coefficient and pressure drop modeling, Int. J. Heat Mass Transf., 93, 1248, 10.1016/j.ijheatmasstransfer.2015.09.019 Song, 2018, New adiabatic and condensation two-phase flow pattern maps of R14 in a horizontal tube, Int. J. Heat Mass Transf., 127, 910, 10.1016/j.ijheatmasstransfer.2018.07.129 Simon, 1992, Properties of copper and copper alloys at cryogenic temperatures, National Institute of Standards and Technology Rouhani, 1970, Calculation of void volume fraction in the subcooled and quality boiling regions, Int. J. Heat Mass Transf., 13, 383, 10.1016/0017-9310(70)90114-6 Lemmon, 2013, NIST standard database 23, Version 9.1, Appl. Chem. Mater. Division Yang, 2018, Experimental study on flow boiling heat transfer and pressure drop in a horizontal tube for R1234ze(E) versus R600a, Int. J. Refrig., 85, 334, 10.1016/j.ijrefrig.2017.10.011 Muller-Steinhagen, 1986, A simple friction pressure drop correlation for two-phase flow in pipes, Chem. Eng. Prog. Symp., 20, 297, 10.1016/0255-2701(86)80008-3 Zhang, 2001, Correlation of two-phase friction for refrigerants in small-diameter tubes, Exp. Therm. Fluid Sci., 25, 131, 10.1016/S0894-1777(01)00066-8 Chen, 2001, two phase pressure drop of air-water and R410A in small horizontal tubes, Int. J. Multiphase Flow, 27, 1293, 10.1016/S0301-9322(01)00004-0 Jige, 2016, Condensation of refrigerants in a multiport tube with rectangular minichannels, Int. J. Refrig., 67, 202, 10.1016/j.ijrefrig.2016.03.020 Sempértegui-Tapia, 2017, Two-phase frictional pressure drop in horizontal micro-scale channels: Experimental data analysis and prediction method development, Int. J. Refrig., 79, 143, 10.1016/j.ijrefrig.2017.03.024 Hirose, 2018, Development of the general correlation for condensation heat transfer and pressure drop inside horizontal 4 mm small-diameter smooth and microfin tubes, Int. J. Refrig., 90, 238, 10.1016/j.ijrefrig.2018.04.014 P.B. Whalley, Multiphase flow and pressure drop, in: Heat Exchanger Design Handbook, Hemisphere, Washington, DC, 1980, pp. 181–188. Hwang, 2006, The pressure drop in microtubes and the correlation development, Int. J. Heat Mass Transf., 49, 1804, 10.1016/j.ijheatmasstransfer.2005.10.040 Chisholm, 1972, Pressure gradients due to friction during the flow of evaporating two-phase mixtures in smooth tubes and channels, Int. J. Heat Mass Transf., 16, 347, 10.1016/0017-9310(73)90063-X Baroczy, 1966, A systematic correlation for two-phase pressure drop, Chem. Eng. Prog. Symp., 62, 232 Jung, 1989, Prediction of pressure drop during horizontal annular flow boiling of pure and mixed refrigerants, Int. J. Heat Mass Transf., 32, 2435, 10.1016/0017-9310(89)90203-2 Wang, 1997, Visual observation of two-phase flow pattern of R-22, R-134a, and R-407C in a 6.5-mm smooth tube, Exp. Therm. Fluid Sci., 15, 395, 10.1016/S0894-1777(97)00007-1 Warrier, 2002, Heat transfer and pressure drop in narrow rectangular channels, Exp. Therm. Fluid Sci., 26, 53, 10.1016/S0894-1777(02)00107-3 Yu, 2002, Two-phase pressure drop, boiling heat transfer, and critical heat flux to water in a small-diameter horizontal tube, Int. J. Multiphase Flow, 28, 927, 10.1016/S0301-9322(02)00019-8 Qu, 2003, Measurement and prediction of pressure drop in two-phase micro-channel heat sinks, Int. J. Heat Mass Transf., 46, 2737, 10.1016/S0017-9310(03)00044-9 H.J. Lee, D.Y. Liu, S.C. Yao, Y. Alyousef, Generalized two-phase pressure drop and heat transfer correlations in evaporative micro-mini-channels, in: Proceedings of ASME-JSME Thermal Engineering Summer Heat Transfer Conference, Vancouver, Canada, 2007. Li, 2011, Generalized adiabatic pressure drop correlations in evaporative micro/mini-channels, Exp. Therm. Fluid Sci., 35, 866, 10.1016/j.expthermflusci.2010.07.005 Bohdal, 2011, Comparative investigations of the condensation of R134a and R404A refrigerants in pipe minichannels, Int. J. Heat Mass Transf., 54, 1963, 10.1016/j.ijheatmasstransfer.2011.01.005 Xu, 2013, A new correlation of two-phase frictional pressure drop for condensing flow in pipes, Nucl. Eng. Des., 263, 87, 10.1016/j.nucengdes.2013.04.017 Hossain, 2015, Two-phase frictional multiplier correlation for the prediction of condensation pressure drop inside smooth horizontal tube, Procedia Eng., 105, 64, 10.1016/j.proeng.2015.05.008 Huang, 2017, An experimental study on flow boiling pressure drop in multi-microchannel evaporators with different refrigerants, Exp. Therm. Fluid Sci., 80, 391, 10.1016/j.expthermflusci.2016.08.030 Zhuang, 2016, Two-phase flow pattern map for R170 in a horizontal smooth tube, Int. J. Heat Mass Transf., 102, 1141, 10.1016/j.ijheatmasstransfer.2016.06.094 Saisorn, 2010, Flow pattern and heat transfer characteristics of R-134a refrigerant during flow boiling in a horizontal circular mini-channel, Int. J. Heat Mass Transf., 53, 4023, 10.1016/j.ijheatmasstransfer.2010.05.022 Li, 2018, An experimental study of flow boiling frictional pressure drop of R134a in a horizontal 1.002 mm tube under hypergravity, Int. J. Heat Mass Transf., 118, 247, 10.1016/j.ijheatmasstransfer.2017.10.120 Gao, 2018, Heat transfer and pressure drop characteristics of ammonia during flow boiling inside a horizontal small diameter tube, Int. J. Heat Mass Transf., 127, 981, 10.1016/j.ijheatmasstransfer.2018.07.137 Sarmadian, 2017, Condensation heat transfer and pressure drop characteristics of R-600a in horizontal smooth and helically dimpled tubes, Exp. Therm. Fluid Sci., 86, 54, 10.1016/j.expthermflusci.2017.04.001 Aroonrat, 2017, Experimental study on two-phase condensation heat transfer and pressure drop of R-134a flowing in a dimpled tube, Int. J. Heat Mass Transf., 106, 437, 10.1016/j.ijheatmasstransfer.2016.08.046 Del Col, 2015, Condensation heat transfer and two-phase frictional pressure drop in a single minichannel with R1234ze(E) and other refrigerants, Int. J. Refrig., 50, 87, 10.1016/j.ijrefrig.2014.10.022 Maråk, 2009 Park, 2008, NH3 in-tube condensation heat transfer and pressure drop in a smooth tube, Int. J. Refrig., 31, 643, 10.1016/j.ijrefrig.2008.01.005