Mixed convection in a trapezoidal enclosure filled with two layers of nanofluid and porous media with a rotating circular cylinder and a sinusoidal bottom wall
Tóm tắt
The laminar two-dimensional mixed convection in a trapezoidal enclosure with a rotating inner circular cylinder and a sinusoidal bottom wall is studied numerically. The fluid inside the enclosure is a CuO–water nanofluid layer in the top space of it, while the bottom space includes a CuO–water nanofluid saturated with a porous medium. Both the right and left sidewalls are assumed adiabatic, while the bottom and the top walls of the enclosure are maintained, respectively, at the hot and cold temperatures. The dimensionless governing equations are expressed for velocity and temperature formulation and modeled by using COMSOL code based on the Galerkin finite element method. Parametric studies on the effects of various significant parameters such as Rayleigh number, Darcy number, the inner cylinder radius, the porous layer thickness, the angular rotational velocity, the solid volume fraction and the number of undulations on the flow and thermal fields together with the heat transfer rate have been performed. The highest value of the stream function for (Ra = 103 and Ra = 105) is seen at (R = 0.2 and S = 0.2). The same thing is observed, when the bottom wall is considered wavy. For (Ra = 103 and N = 0) and (0.5 ≤ S ≤ 0.8), it can be seen that as the inner cylinder radius increases from (R = 0.1) to (R = 0.3), the stream function values increase continuously. It is found that the average Nusselt number increases as the Rayleigh and Darcy numbers, the solid volume fraction, inner cylinder radius and the angular rotational velocity of the cylinder increase, while it decreases as the porous layer thickness and the number of undulations increase. Comparisons with previously published numerical works are performed, and good agreements between the results are observed.
Tài liệu tham khảo
Choi U. Enhancing thermal conductivity of fluids with nanoparticles. In: Siginer DA, Wang HP, (editors). Developments and applications of non-Newtonian flows, FED 231, 1995, pp. 99–105.
Chand R, Rana G, Hussein AK. On the onset of thermal instability in a low Prandtl number nanofluid layer in a porous medium. J Appl Fluid Mech. 2015;8(2):265–72.
Chand R, Rana G, Hussein AK. Effect of suspended particles on the onset of thermal convection in a nanofluid layer for more realistic boundary conditions. Int J Fluid Mech Res. 2015;42(5):375–90.
Hussein AK, Walunj A, Kolsi L. Applications of nanotechnology to enhance the performance of the direct absorption solar collectors. J Therm Eng. 2016;2(1):529–40.
Hussein AK. Applications of nanotechnology in renewable energies-A comprehensive overview and understanding. Renew Sustain Energy Rev. 2015;42:460–76.
Hussein AK. Applications of nanotechnology to improve the performance of solar collectors—recent advances and overview. Renew Sustain Energy Rev. 2016;62:767–92.
Hussein AK, Li D, Kolsi L, Kata S, Sahoo B. A review of nano fluid role to improve the performance of the heat pipe solar collectors. Energy Proc. 2017;109:417–24.
Mahian O, Kolsi L, Amani M, Estellé P, Ahmadi G, Kleinstreuer C, Marshall J, Siavashi M, Taylor R, Niazmand H, Wongwises S, Hayat T, Kolanjiyil A, Kasaeian A, Pop I. Recent advances in modeling and simulation of nanofluid flows—part I: fundamentals and theory. Phys Rep. 2019;790:1–48.
Mahian O, Kolsi L, Amani M, Estellé P, Ahmadi G, Kleinstreuer C, Marshall J, Taylor R, Abu-Nada E, Rashidi S, Niazmand H, Wongwises S, Hayat T, Kasaeian A, Pop I. Recent advances in modeling and simulation of nanofluid flows—part II: applications. Phys Rep. 2019;791:1–59.
Sivasankaran S, Sivakumar V, Hussein AK. Numerical study on mixed convection in an inclined lid-driven cavity with discrete heating. Int Commun Heat Mass Transf. 2013;46:112–25.
Sivasankaran S, Sivakumar V, Hussein AK, Prakash P. Mixed convection in a lid-driven two-dimensional square cavity with corner heating and internal heat generation. Numer Heat Transf Part A. 2014;65:269–86.
Ismael M, Ghalib H. Double diffusive natural convection in a partially layered cavity with inner solid conductive body. Sci Iranica B. 2018;25(5):2643–59.
Bhuvaneswari M, Eswaramoorthi S, Sivasankaran S, Hussein AK. Cross-diffusion effects on MHD mixed convection over a stretching surface in a porous medium with chemical reaction and convective condition. Eng Trans. 2019;67(1):3–19.
Hussein AK, Hussain S. Mixed convection through a lid-driven air-filled square cavity with a hot wavy wall. Int J Mech Mater Eng (IJMME). 2010;5(2):222–35.
Saha S, Hussein AK, Saha G, Hussain S. Mixed convection in a tilted lid-driven square enclosure with adiabatic cylinder at the center. Int J Heat Technol. 2011;29(1):143–56.
Gangawane K, Oztop H, Abu-Hamdeh N. Mixed convection characteristic in a lid-driven cavity containing heated triangular block: effect of location and size of block. Int J Heat Mass Transf. 2018;124:860–75.
Chakravarty A, Datta P, Ghosh K, Sen S, Mukhopadhyay A. Mixed convective heat transfer in an enclosure containing a heat generating porous bed under the influence of bottom injection. Int J Heat Mass Transf. 2018;117:645–57.
Taghizadeh S, Asaditaheri A. Heat transfer and entropy generation of laminar mixed convection in an inclined lid driven enclosure with a circular porous cylinder. Int J Therm Sci. 2018;134:242–57.
Alsabery A, Tayebi T, Chamkha A, Hashim I. Effect of rotating solid cylinder on entropy generation and convective heat transfer in a wavy porous cavity heated from below. Int Commun Heat Mass Transf. 2018;95:197–209.
Mahalakshmi T, Nithyadevi N, Oztop H, Abu-Hamdeh N. MHD mixed convective heat transfer in a lid-driven enclosure filled with Ag-water nanofluid with center heater. Int J Mech Sci. 2018;142–143:407–19.
Yu Q, Xu H, Liao S. Analysis of mixed convection flow in an inclined lid-driven enclosure with Buongiorno’s nanofluid model. Int J Heat Mass Transf. 2018;126:221–36.
Zhou W, Yan Y, Liu X, Chen H, Liu B. Lattice Boltzmann simulation of mixed convection of nanofluid with different heat sources in a double lid-driven cavity. Int Commun Heat Mass Transf. 2018;97:39–46.
Mamourian M, Milani Shirvan K, Ellahi R, Rahimi A. Optimization of mixed convection heat transfer with entropy generation in a wavy surface square lid-driven cavity by means of Taguchi approach. Int J Heat Mass Transf. 2016;102:544–54.
Cho C. Heat transfer and entropy generation of mixed convection flow in Cu-water nanofluid-filled lid-driven cavity with wavy surface. Int J Heat Mass Transf. 2018;119:163–74.
Pal S, Bhattacharyya S, Pop I. Effect of solid-to-fluid conductivity ratio on mixed convection and entropy generation of a nanofluid in a lid-driven enclosure with a thick wavy wall. Int J Heat Mass Transf. 2018;127:885–900.
Alsabery A, Ismael M, Chamkha A, Hashim I. Numerical investigation of mixed convection and entropy generation in a wavy-walled cavity filled with nanofluid and involving a rotating cylinder. Entropy. 2018. https://doi.org/10.3390/e20090664.
Alsabery A, Sheremet M, Chamkha A, Hashim I. Impact of non-homogeneous nanofluid model on transient mixed convection in a double lid-driven wavy cavity involving solid circular cylinder. Int J Mech Sci. 2019;150:637–55.
Alsabery A, Ismael M, Chamkha A, Hashim I. Mixed convection of Al2O3–water nanofluid in a double lid-driven square cavity with a solid inner insert using Buongiorno’s two-phase model. Int J Heat Mass Transf. 2018;119:939–61.
Nayak R, Bhattacharyya S, Pop I. Effects of nanoparticles dispersion on the mixed convection of a nanofluid in a skewed enclosure. Int J Heat Mass Transf. 2018;125:908–19.
Garmroodi M, Ahmadpour A, Talati F. MHD mixed convection of nanofluids in the presence of multiple rotating cylinders in different configurations: a two-phase numerical study. Int J Mech Sci. 2019;150:247–64.
Hussain S, Mehmood K, Sagheer M. MHD mixed convection and entropy generation of water–alumina nanofluid flow in a double lid driven cavity with discrete heating. J Magn Magn Mater. 2016;419:140–55.
Arani A, Ababaei A, Sheikhzadeh G, Aghaei A. Numerical simulation of double-diffusive mixed convection in an enclosure filled with nanofluid using Bejan’s heatlines and masslines. Alexandria Eng J. 2018;57:1287–300.
Hussain S, Oztop H, Mehmood K, Abu-Hamdeh N. Effects of inclined magnetic field on mixed convection in a nanofluid filled double lid-driven cavity with volumetric heat generation or absorption using finite element method. Chin J Phys. 2018;56:484–501.
Sheremet M, Roşca N, Roşca A, Pop I. Mixed convection heat transfer in a square porous cavity filled with a nanofluid with suction/injection effect. Comput Math Appl. 2018;76:2665–77.
Gibanov N, Sheremet M, Oztop H, Abu-Hamdeh N. Mixed convection with entropy generation of nanofluid in a lid-driven cavity under the effects of a heat-conducting solid wall and vertical temperature gradient. Eur J Mech B Fluids. 2018;70:148–59.
Rajarathinam M, Nithyadevi N, Chamkha A. Heat transfer enhancement of mixed convection in an inclined porous cavity using Cu-water nanofluid. Adv Powder Technol. 2018;29:590–605.
Astanina M, Sheremet M, Oztop H, Abu-Hamdeh N. Mixed convection of Al2O3–water nanofluid in a lid-driven cavity having two porous layers. Int J Heat Mass Transf. 2018;118:527–37.
Xu H, Xing Z, Wang F, Cheng Z. Review on heat conduction, heat convection, thermal radiation and phase change heat transfer of nanofluids in porous media: fundamentals and applications. Chem Eng Sci. 2019;195:462–83.
Kareem A, Mohammed H, Hussein AK, Gao S. Numerical investigation of mixed convection heat transfer of nanofluids in a lid-driven trapezoidal cavity. Int Commun Heat Mass Transf. 2016;77:195–205.
Chamkha A, Ismael M. Magnetic field effect on mixed convection in lid-driven trapezoidal cavities filled with a Cu-water nanofluid with an aiding or opposing side wall. J Therm Sci Eng Appl. 2016;8:031009-1–-12.
Selimefendigil F, Oztop H. Modeling and optimization of MHD mixed convection in a lid-driven trapezoidal cavity filled with alumina-water nanofluid: effects of electrical conductivity models. Int J Mech Sci. 2018;136:264–78.
Siavashi M, Bahrami H, Aminian E. Optimization of heat transfer enhancement and pumping power of a heat exchanger tube using nanofluid with gradient and multi-layered porous foams. Appl Therm Eng. 2018;138:465–74.
Bozorg M, Siavashi M. Two-phase mixed convection heat transfer and entropy generation analysis of a non-Newtonian nanofluid inside a cavity with internal rotating heater and cooler. Int J Mech Sci. 2019;151:842–57.
Asiaei S, Zadehkafi A, Siavashi M. Multi-layered porous foam effects on heat transfer and entropy generation of nanofluid mixed convection inside a two-sided lid-driven enclosure with internal heating. Transp Porous Med. 2019;126(1):223–47.
Siavashi M, Rostami A. Two-phase simulation of non-Newtonian nanofluid natural convection in a circular annulus partially or completely filled with porous media. Int J Mech Sci. 2017;133:689–703.
Toosi M, Siavashi M. Two-phase mixture numerical simulation of natural convection of nanofluid flow in a cavity partially filled with porous media to enhance heat transfer. J Mol Liq. 2017;238:553–69.
Siavashi M, Yousofvand R, Rezanejad S. Nanofluid and porous fins effect on natural convection and entropy generation of flow inside a cavity. Adv Powder Technol. 2018;29:142–56.
Siavashi M, Iranmehr S. Using sharp wedge-shaped porous media in front and wake regions of external nanofluid flow over a bundle of cylinders. Int J Numer Methods Heat Fluid Flow. 2019;29(10):3730–55. https://doi.org/10.1108/HFF-10-2018-0575
Norouzi A, Siavashi M, Oskouei M. Efficiency enhancement of the parabolic trough solar collector using the rotating absorber tube and nanoparticles. Renew Energy. 2020; 145:569–584.
Selimefendigil F, Oztop H. Corrugated conductive partition effects on MHD free convection of CNT-water nanofluid in a cavity. Int J Heat Mass Transf. 2019;129:265–77.
Selimefendigil F, Chamkha A. Magnetohydrodynamics mixed convection in a lid-driven cavity having a corrugated bottom wall and filled with a non-Newtonian power-law fluid under the influence of an inclined magnetic field. J Therm Sci Eng Appl. 2016;8(2):1–8.
Selimefendigil F, Oztop H. Conjugate mixed convection of nanofluid in a cubic enclosure separated with a conductive plate and having an inner rotating cylinder. Int J Heat Mass Transf. 2019;139:1000–17.
Selimefendigil F, Oztop H. Effects of an inner stationary cylinder having an elastic rod-like extension on the mixed convection of CNT-water nanofluid in a three dimensional vented cavity. Int J Heat Mass Transf. 2019;137:650–68.
Selimefendigil F, Ismael M, Chamkha A. Mixed convection in superposed nanofluid and porous layers in square enclosure with inner rotating cylinder. Int J Mech Sci. 2017;124–125:95–108.