Predicting pull-out behaviour based on the bond mechanism of arch-type steel fibre in cementitious composite

Fantilli, 2008, Effect of bond-slip on the crack bridging capacity of steel fibers in cement-based composites, J Mater Civ Eng, 20, 588, 10.1061/(ASCE)0899-1561(2008)20:9(588) Naaman, 2003, Engineered steel fibers with optimal properties for reinforcement of cement composites, J Adv Concr Technol, 1, 241, 10.3151/jact.1.241 Balaguru, 1992 Banthia, 2012, Fiber-reinforced concrete in precast concrete application. Research leads to innovative products, PCI J, 23 Bentur, 1990 Leung, 1999, Optimal steel fiber strength for reinforcement of cementitious materials, J Mater Civ Eng, 11, 116, 10.1061/(ASCE)0899-1561(1999)11:2(116) Johnston, 2001, 3 Lee, 2010, Orientation factor and number of fibers at failure plane in ring-type steel fiber reinforced concrete, Cem Concr Res, 40, 810, 10.1016/j.cemconres.2009.11.009 Soroushian, 1990, Distribution and orientation of fibers in steel fiber reinforced concrete, ACI Mater J, 87, 433 Leung, 1995, Crack-bridging force in random ductile fiber brittle matrix composites, J Eng Mech, 121, 1315, 10.1061/(ASCE)0733-9399(1995)121:12(1315) Gopalaratnam VS, Abu-Mathkour HJ. Investigation of the pull-out characteristics of steel fibers from mortar matrices. In: International symposium on fibre reinforced concrete. Madras; 1987. p. 2201–11. Gray RJ. Fiber-matrix bond strength and its influence on mechanical properties of steel fiber reinforced mortars [Ph.D. thesis]. University of Calgary; 1982. Shannag, 1997, Pull-out behavior of steel fibers from cement-based composites, Cem Concr Res, 27, 925, 10.1016/S0008-8846(97)00061-6 Lee, 2010, Pull-out behavior of inclined steel fiber in an ultra-high strength cementitious matrix, Constr Build Mater, 24, 2030, 10.1016/j.conbuildmat.2010.03.009 Robins, 2002, Pull-out behavior of hooked steel fibres, Mater Struct, 35, 434, 10.1007/BF02483148 Zile, 2013, Effect of the fiber geometry on the pull-out response of mechanically deformed steel fibers, Cem Concr Res, 44, 18, 10.1016/j.cemconres.2012.10.014 Laranjeira, 2010, Predicting the pull-out response of inclined hooked steel fibers, Cem Concr Res, 40, 1471, 10.1016/j.cemconres.2010.05.005 Cunha, 2010, Pull-out behavior of steel fibers in self-compacting concrete, J Mater Civ Eng, 22, 1, 10.1061/(ASCE)MT.1943-5533.0000001 JCI SF-8. Method of test for bond of fibers. Japan Concrete Institute; 2002.