Vegetable oils as a potential cutting fluid—An evolution

Kline & Company, Inc. Competitive intelligence for the global lubricants industry, 2004–2014. Kline & Company, Inc., 2006. Loredana, 2008, Basestock oils for lubricants from mixtures of corn oil and synthetic diesters, J Am Oil Chem Soc, 85, 71, 10.1007/s11746-007-1156-z Birova, 2002, Lubricating oils based on chemically modified vegetable oils, J Synth Lubr, 291, 10.1002/jsl.3000180405 Abdalla, 2006, The performance and oxidation stability of sustainable metalworking fluid derived from vegetable extracts, Proc ImechE Part B: J Eng Manuf, 220, 10.1243/09544054JEM357 Julieb, 2003, Design of hard water stableemulsifier systems for petroleum and bio-based semi-synthetic metalworking fluids, Environ Sci Technol, 37, 5278, 10.1021/es034437t Abdalla, 2007, Development of novel sustainable neat-oil metal working fluids for stainless steel and titanium alloy machining. Part 1.Formulation development, J Adv Manuf Technol, 34, 21, 10.1007/s00170-006-0585-4 Bennett, 1983, Water based cutting fluids and human health, Tribol Int, 45–60 1991 1991 1994 2000 Korde, 1993, Biodegradation of chlorinated aliphatics and aromatic compounds in total-recycle expanded-bed reactors, Appl Biochem Biotechnol, 45/46, 731 Zeman, 1995, Biodegradable lubricants–studies on thermo oxidation of metal–working fluids by differential scanning calorimetry (DSC), Thermochim Acta, 268, 9, 10.1016/0040-6031(95)02512-X Norrby T. Environmentally adopted lubricants—where are the opportunities?. Stat oil Lubricants R&D, 2003. Matthew, 2007, Influence of fatty acid composition on the tribological performance of two vegetable-based lubricants, J Synth Lubr, 24, 101, 10.1002/jsl.32 Fox, 2007, Vegetable oil based lubricants–A review of oxidation, Tribol Int, 40, 1035, 10.1016/j.triboint.2006.10.001 Mongkolwongrojn, 2002, Theoretical characteristics of hydrodynamic journal bearings lubricated with soyabean-based oil, J Synth Lubr, 213, 10.1002/jsl.3000190304 Waleska, 2005, The effect of chemical structure of basefluids on antiwear effectiveness of additives, Tribol Int, 321 Helena, 2001, Lubricant base fluids based on renewable raw materials their catalytic manufacture and modification, Appl Catal A: Gen, 221, 429, 10.1016/S0926-860X(01)00891-2 Maleque, 2003, Vegetable-based biodegradable lubricating oil additives, Ind Lubr Tribol, 55, 137, 10.1108/00368790310470976 Adhvaryu, 2002, Epoxidized soyabean oil as a potential source of high temperature lubricants, Ind Crops Prod, 15, 247, 10.1016/S0926-6690(01)00120-0 Erhan, 2000, Lubricant base stocks from vegetable oils, Ind Crops Prod, 277, 10.1016/S0926-6690(99)00061-8 Mercurio, 2004, Testing the ecotoxicology of vegetable versus mineral based lubricating oils—1. degradation rates using tropical marine microbes, Environ Pollut, 129, 165, 10.1016/j.envpol.2003.11.001 Iowa Soyabean Promotion Board and Center for Agricultural and Rural Development. The future of the Iowa soyabean industry. Iowa State University, 1993. Zeman, 1995, Biodegradable lubricants—studies on thermo-oxidation of metal—working and hydraulic fluids by differential scanning calorimetry, Thermochim Acta, 268, 9, 10.1016/0040-6031(95)02512-X Jayadas, 2007, Elucidation of the corrosion mechanism of vegetable-oil-based lubricants, J Tribol, 129, 419, 10.1115/1.2464133 Gapinski RE, Joseph IE, Layzell BD. A vegetable oil based tractor lubricant. SAE Tech paper 941785 1994:1–9. Becker, 1996, An evaluation of antioxidants for vegetable oils at elevated temperatures, Lubr Sci, 8, 95, 10.1002/ls.3010080202 Ohkawa SA, Konishi H, Hatano K, Tanaka K, Iwamura M. Oxidation and corrosion characteristics of vegetable base biodegradable hydraulic oils. SAE Tech Paper 951038, 1995:55–63. Lou, 1996, An investigation of the use of soyabean oil in hydraulic systems, Bioresour Technol, 56, 41, 10.1016/0960-8524(95)00184-0 Wilfried, 1998, Lubricants and the environment, Tribol Int, 13, 35 Choi, 1997, Tribological behavior of some antiwear additives in vegetable oils, Tribol Int, 30, 677, 10.1016/S0301-679X(97)00039-X Li, 2003, Tribological properties of phosphate esters as additives in rape seed oil, J Synth Lubr, 20, 151, 10.1002/jsl.3000200206 Li, 2001, Tribological behavior of three phosphate esters containing the benzotriazole group as additives in rapeseed oil, J Synth Lubr, 18, 225, 10.1002/jsl.3000180305 Weijiu, 2004, Tribological performance and action mechanism of S-[2-(acetomodo) thiazol-l-yl] dialyl dithiocarbamate as additive in rapeseed oil, Wear, 256, 1106, 10.1016/S0043-1648(03)00532-5 Dmitrieva, 2001, Compasites based on rapeseed oil and functional additives, J Frict Wear, 22, 93 Weiqiang, 2004, The tribological behaviour of some triazine-dithiocarbamate derivatives as additives in vegetable oil, Wear, 256, 268, 10.1016/S0043-1648(03)00372-7 Jayadas, 2007, Tribological evalution of coconut oil as an environment-friendly lubricant, Tribol Int, 40, 350, 10.1016/j.triboint.2005.09.021 Dietrich, 2002, Recent trends in environmentally friendly lubricants, J Synth Lubr, 18, 327, 10.1002/jsl.3000180407 Piyush, 2007, Green approach for the preparation of biodegradable lubricant base stock from epoxidised vegetable oil, Appl Catal, 69, 207, 10.1016/j.apcatb.2006.06.016 Adhvaryu, 2004, Tribological studies of thermally and chemically modified vegetable oils for use as environmentally friendly lubricants, Wear, 257, 359, 10.1016/j.wear.2004.01.005 Leslic, 2006 Loredana, 2008, Base stock oils for Lubricants from mixtures of corn oil and synthetic diesters, J Am Oil Chem Soc, 85, 71, 10.1007/s11746-007-1156-z Steven, 2003, Cermak, Synthetic and physical properties of estolide-based functional fluids, Ind Crops Prod, 18, 183, 10.1016/S0926-6690(03)00061-X Bhatnagar, 2006, HFRR studies on Methyl ester of non edible vegetable oils, Energy Fuels, 20, 1341, 10.1021/ef0503818 Bondiloli, 2003, Crambe abyssinica oil and its derivatives as renewable lubricants: synthesis and characterisation of different esters based on crambe fatty acids, J Synth Lubr, 15, 271, 10.1002/jsl.3000150403 Svajus, 2001, Thin film test to investigate liquid oxypolymerization of nonvolatile analyses: assessment of vegetable oils and biodegradable lubricants, J Am Oil Chem Soc, 1029 Gryglewicz, 2003, Preparartion of polyol ester based on vegetable and animal fats, Bioresour Technol, 87, 35, 10.1016/S0960-8524(02)00203-1 Sivasankaran, 1988, Jojoba-oil-based two stroke gasoline engine lubricant, Tribol Int, 21, 327, 10.1016/0301-679X(88)90109-0 Ananda, 1988, Lubricant components from vegetable oils of Indian origin, J Synth Lubr, 15, 97, 10.1002/jsl.3000150203 Joseph, 2007, Study of some non-edible vegetable oils of Indian origin for lubricant application, J Synth Lubr, 24, 181, 10.1002/jsl.39 Jacob, 2004, Emulsions containing vegetable oils for cutting fluid, application, Colloids Surf A: Physicochem Eng Aspects, 237, 141, 10.1016/j.colsurfa.2003.12.029 Singh, 2006, Metal working fluids from vegetable fluids, J Synth Lubr, l23, 167, 10.1002/jsl.19 De Chiffre, 2002, Investigations of cutting fluid performance using different machining operations, Lubr Eng, 22 Andres FC. Experimental comparison of vegetable and petroleum base oils in Metal working fluids using the tapping torque test, In: Proceedings of the Japan-USA Symposium on Flexible Automation, 2004, Denver Co. Peter, 2005, Mist generation from metal working fluids formulated using vegetable oils, Ann, Occup Hyg, Br Occup Hyg Soc, 40, 283 Salete Martins, 2006, Development of new cutting fluid for grinding process adjusting mechanical performance and environmental impact, J Mater Process Technol, 179, 185, 10.1016/j.jmatprotec.2006.03.090 Carcel, 2005, Evaluation of vegetable oils as pre-lube oils for stamping, Mater Des, 26, 587, 10.1016/j.matdes.2004.08.010 Lovell, 2006, Increasing formability in sheet metal stamping operations using environmentally friendly lubricants, J Mater Process Technol, 177, 87, 10.1016/j.jmatprotec.2006.04.045 Ulf, 2003, A tribological study of a novel pre-treatment with linseed oil bonded to mercaptosilane treated aluminium, Surf Coat Technol, 166, 141, 10.1016/S0257-8972(02)00784-3 Nicoletta avasio, 2002, Environmetal friendly lubricants through slective hydrogenation of rapeseed oil over supported copper catalyst, Appl Catal A:Gen, 233, 1, 10.1016/S0926-860X(02)00128-X Shashidhara YM, Jayaram SR. Vegetable oil Based Lubricants for Industrial Applications-A Review, In: Proceedings of the International Conference on Industrial Tribology-06, 30th November–2nd December 2006, Indian Institute of Science, Bangalore, India.