Thermodynamics and entropy generation studies of a T-shaped micro-combustor: Effects of porous medium and ring-shaped ribs

Chia, 2007, The development of a micropower (micro-thermophotovoltaic) device, J. Power Sources, 165, 455, 10.1016/j.jpowsour.2006.12.006 Ju, 2011, Microscale combustion: technology development and fundamental research, Prog. Energy Combust. Sci., 37, 669, 10.1016/j.pecs.2011.03.001 Maruta, 2011, Micro and mesoscale combustion, Proc. Combust. Inst., 33, 125, 10.1016/j.proci.2010.09.005 Shirsat, 2011, A review of progress in heat recirculating meso-scale combustors, Appl. Energy, 88, 4294, 10.1016/j.apenergy.2011.07.021 Chou, 2011, Development of micro power generators–a review, Appl. Energy, 88, 1, 10.1016/j.apenergy.2010.07.010 Wan, 2017, Dynamics of premixed CH4/air flames in a micro combustor with a plate flame holder and preheating channels, Energy, 139, 366, 10.1016/j.energy.2017.08.002 Yang, 2018, Effect of oxygen enrichment on combustion efficiency of lean H2/N2/O2 flames in a micro cavity-combustor, Chem. Eng. Process., 127, 50, 10.1016/j.cep.2018.03.019 Kaisare, 2012, A review on microcombustion: Fundamentals, devices and applications, Prog. Energy Combust. Sci., 38, 321, 10.1016/j.pecs.2012.01.001 Selvan, 2016, Micro-scale energy harvesting devices: Review of methodological performances in the last decade, Renew. Sustain. Energy Rev., 54, 1035, 10.1016/j.rser.2015.10.046 Yang, 2014, Development of micro-thermophotovoltaic power generator with heat recuperation, Energy Convers. Manage., 78, 81, 10.1016/j.enconman.2013.10.040 Bani, 2018, Numerical investigation of key parameters of the porous media combustion based Micro-Thermophotovoltaic system, Energy, 157, 969, 10.1016/j.energy.2018.05.151 Pan, 2007, Effects of major parameters on micro-combustion for thermophotovoltaic energy conversion, Appl. Therm. Eng., 27, 1089, 10.1016/j.applthermaleng.2006.07.038 Zuo, 2017, Numerical investigations on thermal performance of double-layer four-channel micro combustors for micro-thermophotovoltaic system, Energy Convers. Manage., 150, 343, 10.1016/j.enconman.2017.08.029 Faramarzpour, 2018, Effect of backward facing step on radiation efficiency in a micro combustor, Int. J. Therm. Sci., 132, 129, 10.1016/j.ijthermalsci.2018.06.002 Yang, 2016, Effect of reduced pressures on the combustion efficiency of lean H2/air flames in a micro cavity-combustor, Int. J. Hydrogen Energy, 41, 15354, 10.1016/j.ijhydene.2016.06.208 Richecoeur, 2005, Experimental study of flame stabilization in low Reynolds and Dean number flows in curved mesoscale ducts, Proc. Combust. Inst., 30, 2419, 10.1016/j.proci.2004.08.015 Alipoor, 2016, Combustion characteristics and flame bifurcation in repetitive extinction-ignition dynamics for premixed hydrogen-air combustion in a heated micro channel, Energy, 109, 650, 10.1016/j.energy.2016.05.042 Li, 2016, Experimental study on standing wave regimes of premixed H2–air combustion in planar micro-combustors partially filled with porous medium, Fuel, 167, 98, 10.1016/j.fuel.2015.11.033 Li, 2015, Dynamic behaviors of premixed hydrogen–air flames in a planar micro-combustor filled with porous medium, Fuel, 145, 70, 10.1016/j.fuel.2014.12.070 Fanaee, 2015, Analytical two-dimensional modeling of hydrogen–air mixture in catalytic micro-combustor, Meccanica, 50, 1717, 10.1007/s11012-015-0118-z Zhang, 2017, Effect of gas-phase reaction on catalytic reaction for H2/O2 mixture in micro combustor, Int. J. Hydrogen Energy, 42, 16855, 10.1016/j.ijhydene.2017.05.117 Sarath, 2016, Flow field predictions of bluff body introduced micro combustor, Proc. Tech., 24, 420, 10.1016/j.protcy.2016.05.058 Ansari, 2018, Micro-combustor performance enhancement using a novel combined baffle-bluff configuration, Chem. Eng. Sci., 175, 243, 10.1016/j.ces.2017.10.001 Wan, 2016, Effect of the length of a plate flame holder on flame blowout limit in a micro-combustor with preheating channels, Combust. Flame, 170, 53, 10.1016/j.combustflame.2016.05.015 Yang, 2011, Research on modular micro combustor-radiator with and without porous media, Chem. Eng. J., 168, 799, 10.1016/j.cej.2010.12.083 Chua, 2012, Fundamental experiment and numerical analysis of a modular microcombustor with silicon carbide porous medium, Ind. Eng. Chem. Res., 51, 6327, 10.1021/ie203017g Federici, 2008, A computational fluid dynamics study of propane/air microflame stability in a heat recirculation reactor, Combust. Flame, 153, 258, 10.1016/j.combustflame.2007.09.009 Liu, 2019, Experimental and numerical study on the lean premixed filtration combustion of propane/air in porous medium, Appl. Therm. Eng., 150, 445, 10.1016/j.applthermaleng.2018.12.155 Voss, 2013, Investigation on the thermal flame thickness for lean premixed combustion of low calorific H2/CO mixtures within porous inert media, Proc. Combust. Inst., 34, 3335, 10.1016/j.proci.2012.06.044 Chou, 2010, Porous media combustion for micro thermophotovoltaic system applications, Appl. Energy, 87, 2862, 10.1016/j.apenergy.2009.06.039 Li, 2009, A potential heat source for the micro-thermophotovoltaic (TPV) system, Chem. Eng. Sci., 64, 3282, 10.1016/j.ces.2009.04.005 Li, 2010, Experimental investigation of porous media combustion in a planar micro-combustor, Fuel, 89, 708, 10.1016/j.fuel.2009.06.026 Pan, 2015, Hydrogen/oxygen premixed combustion characteristics in micro porous media combustor, Appl. Energy, 160, 802, 10.1016/j.apenergy.2014.12.049 Li, 2016, Numerical study on heat recirculation in a porous micro-combustor, Combust. Flame, 171, 152, 10.1016/j.combustflame.2016.06.007 Li, 2016, Fundamental flame characteristics of premixed H2–air combustion in a planar porous micro-combustor, Chem. Eng. J., 283, 1187, 10.1016/j.cej.2015.08.056 Liu, 2016, A numerical investigation on the effect of wall thermal conductivity on flame stability and combustion efficiency in a mesoscale channel filled with fibrous porous medium, Appl. Therm. Eng., 101, 239, 10.1016/j.applthermaleng.2016.02.099 Bani, 2018, Micro combustion in a porous media for thermophotovoltaic power generation, Appl. Therm. Eng., 129, 596, 10.1016/j.applthermaleng.2017.10.024 Peng, 2018, Investigation on the effects of wall thickness and porous media on the thermal performance of a non-premixed hydrogen fueled cylindrical micro combustor, Energy Convers. Manage., 155, 276, 10.1016/j.enconman.2017.10.095 Peng, 2019, Experimental investigation on premixed hydrogen/air combustion in varied size combustors inserted with porous medium for thermophotovoltaic system applications, Energy Convers. Manage., 200, 112086, 10.1016/j.enconman.2019.112086 Peng, 2020, Investigation on premixed H2/C3H8/air combustion in porous medium combustor for the micro thermophotovoltaic application, Appl. Energy, 260, 114352, 10.1016/j.apenergy.2019.114352 Li, 2019, Effects of heat transfer on flame stability limits in a planar micro-combustor partially filled with porous medium, Proc. Combust. Inst., 37, 5645, 10.1016/j.proci.2018.06.023 Fontana, 2020, Numerical analysis of heat recuperation in micro-combustors using internal recirculation, Chem. Eng. Sci., 211, 115301, 10.1016/j.ces.2019.115301 Hosseini, 2014, Investigation of bluff-body micro-flameless combustion, Energy Convers. Manage., 88, 120, 10.1016/j.enconman.2014.08.023 E, 2016, Effects of inlet pressure on wall temperature and exergy efficiency of the micro-cylindrical combustor with a step, Appl. Energy, 175, 337, 10.1016/j.apenergy.2016.05.039 Zuo, 2016, Orthogonal experimental design and fuzzy grey relational analysis for emitter efficiency of the micro-cylindrical combustor with a step, Appl. Therm. Eng., 103, 945, 10.1016/j.applthermaleng.2016.04.148 Zuo, 2017, Numerical investigations on combustion characteristics of H2/air premixed combustion in a micro elliptical tube combustor, Energy, 126, 1, 10.1016/j.energy.2017.03.011 Zuo, 2017, Numerical investigations on thermal performance of a micro-cylindrical combustor with gradually reduced wall thickness, Appl. Therm. Eng., 113, 1011, 10.1016/j.applthermaleng.2016.11.074 Zuo, 2018, Numerical investigations on an improved counterflow double-channel micro combustor fueled with hydrogen for enhancing thermal performance, Energy Convers. Manage., 159, 163, 10.1016/j.enconman.2018.01.017 Akhtar, 2017, Investigation of energy conversion and flame stability in a curved micro-combustor for thermo-photovoltaic (TPV) applications, Appl. Energy, 192, 134, 10.1016/j.apenergy.2017.01.097 Ni, 2019, Numerical and entropy studies of hydrogen-fuelled micro-combustors with different geometric shaped ribs, Int. J. Hydrogen Energy, 44, 7692, 10.1016/j.ijhydene.2019.01.136 Anderson, 1965, Combustion Theory: The fundamental theory of chemically reacting flow systems (Williams, Forman A.), J. Chem. Educ., 42, A548, 10.1021/ed042pA548.3 Wang, 2019, Experimental study and numerical analysis of the scaling effect on the flame stabilization of propane/air mixture in the micro-scale porous combustor, Energy, 174, 509, 10.1016/j.energy.2019.02.123 Barra, 2004, Heat recirculation and heat transfer in porous burners, Combust. Flame, 137, 230, 10.1016/j.combustflame.2004.02.007 Yang, 2009, Filtration combustion of methane in high-porosity micro-fibrous media, Combust. Sci. Technol., 181, 654, 10.1080/00102200802646748 Jiang, 2014, Analysis of entropy generation distribution in micro-combustors with baffles, Int. J. Hydrogen Energy, 39, 8118, 10.1016/j.ijhydene.2014.03.092 Jejurkar, 2011, Effects of wall thermal conductivity on entropy generation and exergy losses in a H2-air premixed flame microcombustor, Int. J. Hydrogen Energy, 36, 15851, 10.1016/j.ijhydene.2011.08.116 Kuo, 2007, Numerical modeling of non-adiabatic heat-recirculating combustors, Proc. Combust. Inst., 31, 3277, 10.1016/j.proci.2006.08.082 Yang, 2015, Combustion process and entropy generation in a novel microcombustor with a block insert, Chem. Eng. J., 274, 231, 10.1016/j.cej.2015.04.034