State-of-the-art of surface integrity induced by tool wear effects in machining process of titanium and nickel alloys: A review

Ulutan, 2011, Machining induced surface integrity in titanium and nickel alloys: a review, Int. J. Mach. Tools Manuf, 51, 250, 10.1016/j.ijmachtools.2010.11.003 Hardy, 2014, Characterising the integrity of machined surfaces in a powder nickel alloy used in aircraft engines, Proc. CIRP, 13, 411, 10.1016/j.procir.2014.04.070 Myers, 1984, Corrosion behavior and use of titanium and its alloys, JOM, 36, 50, 10.1007/BF03338589 Ezugwu, 2005, Key improvements in the machining of difficult-to-cut aerospace superalloys, Int. J. Mach. Tools Manuf., 45, 1353, 10.1016/j.ijmachtools.2005.02.003 M'Saoubi, 2015, High performance cutting of advanced aerospace alloys and composite materials, CIRP Ann. Manuf. Technol., 64, 557, 10.1016/j.cirp.2015.05.002 Thakur, 2016, State-of-the-art in surface integrity in machining of nickel-based super alloys, Int. J. Mach. Tools Manuf., 100, 25, 10.1016/j.ijmachtools.2015.10.001 Miller, 1995, Advanced materials mean advanced engines, Interdiscipl. Sci. Rev., 20, 117, 10.1179/isr.1995.20.4.117 Fan, 2013, Study of surface quality in machining nickel-based alloy Inconel 718, Int. J. Adv. Manuf. Technol., 69, 2659, 10.1007/s00170-013-5225-1 Özel, 2014, Experimental and numerical investigations on machining induced surface integrity in Inconel-100 nickel-base alloy, Proc. CIRP, 13, 302, 10.1016/j.procir.2014.04.051 Joshi, 2008, Parametric study of machining effect on residual stress and surface roughness of nickel base super alloy UDIMET 720, Adv. Mater. Res. Trans. Tech. Publ., 47, 13 Hood, 2012, Radius end milling of Haynes 282 nickel based superalloy, P. I. Mech. Eng. B: J. Eng., 226, 1745, 10.1177/0954405412455886 Lee, 2007, Friction drilling of IN-713LC cast superalloy, Mater. Manuf. Process., 22, 893, 10.1080/10426910701451697 Thomas, 2010, Microstructural damage during high-speed milling of titanium alloys, Scr. Mater., 62, 250, 10.1016/j.scriptamat.2009.11.009 M'Saoubi, 2008, A review of surface integrity in machining and its impact on functional performance and life of machined products, Int. J. Sustainable Manuf., 1, 203, 10.1504/IJSM.2008.019234 Ibrahim, 2009, The effect of dry machining on surface integrity of titanium alloy Ti-6Al-4V ELI, J. Appl. Sci., 9, 121, 10.3923/jas.2009.121.127 Liang, 2017, Experimental investigations on effects of tool flank wear on surface integrity during orthogonal dry cutting of Ti-6Al-4V, Int. J. Adv. Manuf. Technol., 93, 1617, 10.1007/s00170-017-0654-x Ginting, 2009, Surface integrity of dry machined titanium alloys, Int. J. Mach. Tools Manuf., 49, 325, 10.1016/j.ijmachtools.2008.10.011 Ginting, 2007, Optimal cutting conditions when dry end milling the aeroengine material Ti-6242S, J. Mater. Process. Technol., 184, 319, 10.1016/j.jmatprotec.2006.10.051 Boyer, 2010, Attributes, characteristics, and applications of titanium and its alloys, JOM J. Miner. Met. Mater. Soc., 62, 21, 10.1007/s11837-010-0071-1 Klocke, 2013, High performance cutting of gamma titanium aluminides: influence of lubricoolant strategy on tool wear and surface integrity, Wear, 302, 1136, 10.1016/j.wear.2012.12.035 Liu, 2004, Surface modification of titanium, titanium alloys, and related materials for biomedical applications, Mater. Sci. Eng. R, 47, 49, 10.1016/j.mser.2004.11.001 Zhang, 2016, Selective laser melting of titanium alloys and titanium matrix composites for biomedical applications: a review, Adv. Eng. Mater., 18, 463, 10.1002/adem.201500419 Cui, 2011, Titanium alloy production technology, market prospects and industry development, Mater. Des., 32, 1684, 10.1016/j.matdes.2010.09.011 Guo, 2013, Machinability and surface integrity of Nitinol shape memory alloy, CIRP Ann. Manuf. Technol., 62, 83, 10.1016/j.cirp.2013.03.004 Pramanik, 2015, Machining of titanium alloy (Ti-6Al-4V)-theory to application, Mach. Sci. Technol., 19, 1, 10.1080/10910344.2014.991031 Sunulahpa, 2012, Optimization of the mechanical properties of the superalloy nimonic 80a, Mater. Tehnol., 46, 263 Thakur, 2014, Effect of cutting speed and CVD multilayer coating on machinability of Inconel 825, Surf. Eng., 30, 516, 10.1179/1743294414Y.0000000274 Thakur, 2015, Investigation on some machinability aspects of Inconel 825 during dry turning, Mater. Manuf. Process., 30, 1026, 10.1080/10426914.2014.984216 Jawahir, 2011, Surface integrity in material removal processes: recent advances, CIRP Ann. Manuf. Technol., 60, 603, 10.1016/j.cirp.2011.05.002 Lee, 2014, Development of a hybrid rapid prototyping system using low-cost fused deposition modeling and five-axis machining, J. Mater. Process. Technol., 214, 2366, 10.1016/j.jmatprotec.2014.05.004 Bonyár, 2014, Characterization of rapid PDMS casting technique utilizing molding forms fabricated by 3D rapid prototyping technology (RPT), Int. J. Mater. Form., 7, 189, 10.1007/s12289-012-1119-2 Novovic, 2004, The effect of machined topography and integrity on fatigue life, Int. J. Mach. Tools Manuf., 44, 125, 10.1016/j.ijmachtools.2003.10.018 Klocke, 2015, High speed machining of nickel-based alloys, Int. J. Mech. Manuf. Syst., 8, 3 Grzesik, 2008 Arunachalam, 2000, Machinability of nickel-based high temperature alloys, Mach. Sci. Technol., 4, 127, 10.1080/10940340008945703 Pramanik, 2014, Problems and solutions in machining of titanium alloys, Int. J. Adv. Manuf. Technol., 70, 919, 10.1007/s00170-013-5326-x Li, 2015, State-of-art, challenges, and outlook on manufacturing of cooling holes for turbine blades, Mach. Sci. Technol., 19, 361, 10.1080/10910344.2015.1051543 Kaplan, 2018, Study of tool wear and chemical interaction during machining of Ti6Al4V, Int. J. Refract. Met. Hard Mater., 72, 253, 10.1016/j.ijrmhm.2017.12.012 Hatt, 2018, The effect of titanium alloy chemistry on machining induced tool crater wear characteristics, Wear, 408, 200, 10.1016/j.wear.2018.05.020 Fan, 2014, Material response at tool-chip interface and its effects on tool wear in turning Inconel 718, Mater. Manuf. Process., 29, 1446, 10.1080/10426914.2014.921701 Zhu, 2013, Tool wear characteristics in machining of nickel-based superalloys, Int. J. Mach. Tools Manuf., 64, 60, 10.1016/j.ijmachtools.2012.08.001 Liang, 2018, Tool wear behaviors and corresponding machined surface topography during high-speed machining of Ti-6Al-4V with fine grain tools, Tribol. Int., 121, 321, 10.1016/j.triboint.2018.01.057 Pervaiz, 2014, Influence of tool materials on machinability of titanium-and nickel-based alloys: a review, Mater. Manuf. Process., 29, 219, 10.1080/10426914.2014.880460 Grzesik, 2018, Investigation of tool wear in the turning of Inconel 718 superalloy in terms of process performance and productivity enhancement, Tribol. Int., 118, 337, 10.1016/j.triboint.2017.10.005 Imran, 2014, Comparison of tool wear mechanisms and surface integrity for dry and wet micro-drilling of nickel-base superalloys, Int. J. Mach. Tools Manuf., 76, 49, 10.1016/j.ijmachtools.2013.10.002 M'Saoubi, 2014, Surface integrity of nickel-based alloys subjected to severe plastic deformation by abusive drilling, CIRP Ann. Manuf. Technol., 63, 61, 10.1016/j.cirp.2014.03.067 Liang, 2018, Modeling of plastic deformation induced by thermo-mechanical stresses considering tool flank wear in high-speed machining Ti-6Al-4V, Int. J. Mech. Sci., 10.1016/j.ijmecsci.2018.02.031 Dargusch, 2018, Effect of tool wear evolution on chip formation during dry machining of Ti-6Al-4V alloy, Int. J. Mach. Tool. Manuf., 126, 13, 10.1016/j.ijmachtools.2017.12.003 Orra, 2018, Mechanistic modelling for predicting cutting forces in machining considering effect of tool nose radius on chip formation and tool wear land, Int. J. Mech. Sci., 142, 255, 10.1016/j.ijmecsci.2018.05.004 Xu, 2018, Tool wear and its effect on the surface integrity in the machining of fibre-reinforced polymer composites, Compos. Struct., 188, 257, 10.1016/j.compstruct.2018.01.018 Ducobu, 2015, Finite element prediction of the tool wear influence in Ti6Al4V machining, Proc. CIRP, 31, 124, 10.1016/j.procir.2015.03.056 Yao, 2014, Surface integrity and fatigue behavior for high-speed milling Ti-10V-2Fe-3Al titanium alloy, J. Fail. Anal. Prev., 14, 102, 10.1007/s11668-013-9772-4 Fernández-Valdivielso, 2016, Detecting the key geometrical features and grades of carbide inserts for the turning of nickel-based alloys concerning surface integrity, Proc. Inst. Mech. Eng. C: J. Mech. Eng. Sci., 230, 3725, 10.1177/0954406215616145 M'Saoubi, 2012, Surface integrity analysis of machined Inconel 718 over multiple length scales, CIRP Ann. Manuf. Technol., 61, 99, 10.1016/j.cirp.2012.03.058 Zhou, 2012, An investigation of surface damage in the high speed turning of Inconel 718 with use of whisker reinforced ceramic tools, J. Mater. Process. Technol., 212, 372, 10.1016/j.jmatprotec.2011.09.022 Shi, 2012, Analysis on surface integrity during high speed milling for new damage-tolerant titanium alloy, Trans. Nanjing Univ. Aeronaut. Astronaut., 29, 222 Herbert, 2012, Investigation into the characteristics of white layers produced in a nickel-based superalloy from drilling operations, Mach. Sci. Technol., 16, 40, 10.1080/10910344.2012.648520 Zhou, 2011, Effects of tool wear on subsurface deformation of nickel-based superalloy, Proc. Eng., 19, 407, 10.1016/j.proeng.2011.11.133 Randle, 2009, Electron backscatter diffraction: strategies for reliable data acquisition and processing, Mater. Charact., 60, 913, 10.1016/j.matchar.2009.05.011 Brinksmeier, 1982, Residual stresses-measurement and causes in machining processes, CIRP Ann. Manuf. Technol., 31, 491, 10.1016/S0007-8506(07)60172-3 Genzel, 1999, Some new aspects in X-ray stress analysis of thin layers, Surf. Coat. Technol., 116, 404, 10.1016/S0257-8972(99)00235-2 Zou, 2009, Study on surface damages caused by turning NiCr20TiAl nickel-based alloy, J. Mater. Process. Technol., 209, 5802, 10.1016/j.jmatprotec.2009.06.017 Houchuan, 2015, Influence of cutting speed and tool wear on the surface integrity of the titanium alloy Ti-1023 during milling, Int. J. Adv. Manuf. Technol., 78, 1113, 10.1007/s00170-014-6593-x Sharman, 2006, An analysis of the residual stresses generated in Inconel 718™ when turning, J. Mater. Process. Technol., 173, 359, 10.1016/j.jmatprotec.2005.12.007 Pawade, 2007, An investigation of cutting forces and surface damage in high speed turning of Inconel 718, J. Mater. Process. Technol., 192, 139, 10.1016/j.jmatprotec.2007.04.049 Arrazola, 2014, Correlation between tool flank wear, force signals and surface integrity when turning bars of Inconel 718 in finishing conditions, Int. J. Mach. Mach. Mater., 15, 84 Ezugwu, 1999, The machinability of nickel-based alloys: a review, J. Mater. Process. Technol., 86, 1, 10.1016/S0924-0136(98)00314-8 Sharman, 2004, Workpiece surface integrity and tool life issues when turning Inconel 718™ nickel based superalloy, Mach. Sci. Technol., 8, 399, 10.1081/MST-200039865 Dosbaeva, 2010, Microscopic observations on the origin of defects during machining of direct aged (DA) Inconel 718 superalloy, J. Mater. Eng. Perform., 19, 1193, 10.1007/s11665-009-9587-3 Ranganath, 2009, Experimental investigations into the carbide cracking phenomenon on Inconel 718 superalloy material, ASME 2009 Int. Manuf. Sci. Eng. Conf., 2, 33, 10.1115/MSEC2009-84085 Hughes, 2006, The effect of cutting tool material and edge geometry on tool life and workpiece surface integrity, Proc. Inst. Mech. Eng. B: J. Eng., 220, 93, 10.1243/095440506X78192 Arunachalam, 2004, Surface integrity when machining age hardened Inconel 718 with coated carbide cutting tools, Int. J. Mach. Tools Manuf., 44, 1481, 10.1016/j.ijmachtools.2004.05.005 Zhang, 2016, Relationships of tool wear characteristics to cutting mechanics, chip formation, and surface quality in ultra-precision fly cutting, Int. J. Adv. Manuf. Technol., 83, 133, 10.1007/s00170-015-7483-6 Kishawy, 1999, Effects of process parameters on material side flow during hard turning, Int. J. Mach. Tools Manuf., 39, 1017, 10.1016/S0890-6955(98)00084-4 Hood, 2018, Tool life and workpiece surface integrity when turning an RR1000 nickel-based superalloy, Int. J. Adv. Manuf. Technol., 1 Shunmugavel, 2016, Tool wear and surface integrity analysis of machined heat treated selective laser melted Ti-6Al-4V, Int. J. Mater. Form. Mach. Process., 3, 50 Sui, 2016, The influences of tool wear on Ti6Al4V cutting temperature and burn defect, Int. J. Adv. Manuf. Technol., 85, 2831, 10.1007/s00170-015-8093-z Veldhuis, 2009, Tribological compatibility and improvement of machining productivity and surface integrity, Tribol. Int., 42, 1004, 10.1016/j.triboint.2009.02.004 Li, 2018, Study on tool wear and workpiece surface integrity following drilling of CFRP laminates with variable feed rate strategy, Proc. CIRP, 71, 407, 10.1016/j.procir.2018.05.055 Che-Haron, 2005, The effect of machining on surface integrity of titanium alloy Ti-6% Al-4% V, J. Mater. Process. Technol., 166, 188, 10.1016/j.jmatprotec.2004.08.012 Ramesh, 2008, Surface roughness analysis in machining of titanium alloy, Mater. Manuf. Process., 23, 174, 10.1080/10426910701774700 Sun, 2009, A comprehensive experimental study on surface integrity by end milling Ti-6Al-4V, J. Mater. Process. Technol., 209, 4036, 10.1016/j.jmatprotec.2008.09.022 Tan, 2017, Effect of cutter path orientations on cutting forces, tool wear, and surface integrity when ball end milling TC17, Int. J. Adv. Manuf. Technol., 88, 2589, 10.1007/s00170-016-8948-y Tazehkandi, 2015, On the feasibility of a reduction in cutting fluid consumption via spray of biodegradable vegetable oil with compressed air in machining Inconel 706, J. Clean. Prod., 104, 422, 10.1016/j.jclepro.2015.05.039 Schoop, 2017, High speed cryogenic finish machining of Ti-6Al4V with polycrystalline diamond tools, J. Mater. Process. Tech., 250, 1, 10.1016/j.jmatprotec.2017.07.002 Aspinwall, 2007, The influence of cutter orientation and workpiece angle on machinability when high-speed milling Inconel 718 under finishing conditions, Int. J. Mach. Tools Manuf., 47, 1839, 10.1016/j.ijmachtools.2007.04.007 Niaki, 2017, A comprehensive study on the effects of tool wear on surface roughness, dimensional integrity and residual stress in turning IN718 hard-to-machine alloy, J. Manuf. Processes, 30, 268, 10.1016/j.jmapro.2017.09.016 Li, 2014, Effect tool wear during end milling on the surface integrity and fatigue life of Inconel 718, Proc. CIRP, 14, 546, 10.1016/j.procir.2014.03.056 Pretorius, 2015, Tool wear behaviour and workpiece surface integrity when turning Ti-6Al-2Sn-4Zr-6Mo with polycrystalline diamond tooling, CIRP Ann. Manuf. Technol., 64, 109, 10.1016/j.cirp.2015.04.058 Cai, 2014, Experimental investigation on surface integrity of end milling nickel-based alloy—Inconel 718, Mach. Sci. Technol., 18, 31, 10.1080/10910344.2014.863627 Kwong, 2009, Minor cutting edge-workpiece interactions in drilling of an advanced nickel-based superalloy, Int. J. Mach. Tools Manuf., 49, 645, 10.1016/j.ijmachtools.2009.01.012 Ezugwu, 1999, Tool life and surface integrity when machining Inconel 718 with PVD-and CVD-coated tools, Tribol. Trans., 42, 353, 10.1080/10402009908982228 Sharman, 2008, Surface integrity and tool life when turning Inconel 718 using ultra-high pressure and flood coolant systems, Proc. Inst. Mech. Eng. B: J. Eng., 222, 653, 10.1243/09544054JEM936 Mohsan, 2017, A review on the progress towards improvement in surface integrity of Inconel 718 under high pressure and flood cooling conditions, Int. J. Adv. Manuf. Technol., 91, 107, 10.1007/s00170-016-9737-3 Priarone, 2016, Tool life and surface integrity when turning titanium aluminides with PCD tools under conventional wet cutting and cryogenic cooling, Int. J. Adv. Manuf. Technol., 85, 807, 10.1007/s00170-015-7958-5 Sharman, 2015, The effect of tool nose radius on surface integrity and residual stresses when turning Inconel 718™, J. Mater. Process. Technol., 216, 123, 10.1016/j.jmatprotec.2014.09.002 Agmell, 2017, Modeling subsurface deformation induced by machining of Inconel 718, Mach. Sci. Technol., 21, 103, 10.1080/10910344.2016.1260432 Bushlya, 2011, Characterization of white layer generated when turning aged Inconel 718, Proc. Eng., 19, 60, 10.1016/j.proeng.2011.11.080 Jin, 2012, Effect of cutting speed on surface integrity and chip morphology in high-speed machining of PM nickel-based superalloy FGH95, Int. J. Adv. Manuf. Technol., 60, 893, 10.1007/s00170-011-3679-6 Herbert, 2014, Influence of surface anomalies following hole making operations on the fatigue performance for a nickel-based superalloy, J. Manuf. Sci. Eng., 136, 10.1115/1.4027619 Ranganath, 2009, A finite element modeling approach to predicting white layer formation in nickel superalloys, CIRP Ann. Manuf. Technol., 58, 77, 10.1016/j.cirp.2009.03.109 Österle, 1997, Mechanical and thermal response of a nickel-base superalloy upon grinding with high removal rates, Mater. Sci. Eng. A, 38, 357, 10.1016/S0921-5093(97)00457-7 Sauvage, 2003, Phase transformations in surface layers of machined steels investigated by X-ray diffraction and Mössbauer spectrometry, Mater. Sci. Eng. A, 362, 181, 10.1016/S0921-5093(03)00531-8 Axinte, 2006, Turning of advanced Ni based alloys obtained via powder metallurgy route, CIRP Ann. Manuf. Technol., 55, 117, 10.1016/S0007-8506(07)60379-5 Herbert, 2012, An evaluation of the evolution of workpiece surface integrity in hole making operations for a nickel-based superalloy, J. Mater. Process. Technol., 212, 1723, 10.1016/j.jmatprotec.2012.03.014 Farid, 2009, Effect of machining parameters and cutting edge geometry on surface integrity when drilling and hole making in Inconel 718, SAE Int. J. Mater. Manuf., 2, 564, 10.4271/2009-01-1412 Thakur, 2012, Effect of cutting parameters on the degree of work hardening and tool life during high-speed machining of Inconel 718, Int. J. Adv. Manuf. Technol., 59, 483, 10.1007/s00170-011-3529-6 Soo, 2011, Machinability and surface integrity of RR1000 nickel based superalloy, CIRP Ann. Manuf. Technol., 60, 89, 10.1016/j.cirp.2011.03.094 Ezugwu, 1995, Surface abuse when machining cast iron (G-17) and nickel-base superalloy (Inconel 718) with ceramic tools, J. Mater. Process. Technol., 55, 63, 10.1016/0924-0136(95)01786-0 Ezilarasan, 2013, Effect of machining parameters on surface integrity in machining Nimonic C-263 super alloy using whisker-reinforced ceramic insert, J. Mater. Eng. Perform., 22, 1619, 10.1007/s11665-012-0439-1 Das, 2017, Effect of tool wear on quality in drilling of titanium alloy Ti6Al4V, Part II: microstructure and microhardness, High Speed Mach., 3, 11 Honghua, 2012, Tool life and surface integrity in high-speed milling of titanium alloy TA15 with PCD/PCBN tools, Chin. J. Aeronaut., 25, 784, 10.1016/S1000-9361(11)60445-7 Doremus, 2015, Influence of residual stresses on the fatigue crack growth from surface anomalies in a nickel-based superalloy, Mater. Sci. Eng., A, 644, 234, 10.1016/j.msea.2015.07.077 Xin, 2016, Residual stress and affected layer in disc milling of titanium alloy, Mater. Manuf. Process., 31, 1645, 10.1080/10426914.2015.1090583 Özel, 2012, Prediction of machining induced residual stresses in turning of titanium and nickel based alloys with experiments and finite element simulations, CIRP Ann. Manuf. Technol., 61, 547, 10.1016/j.cirp.2012.03.100 Jafarian, 2014, Simultaneous optimizing residual stress and surface roughness in turning of Inconel 718 superalloy, Mater. Manuf. Process., 29, 337, 10.1080/10426914.2013.864413 Zhou, 2014, Analysis of subsurface microstructure and residual stresses in machined Inconel 718 with PCBN and Al2O3-SiCw tools, Proc. CIRP, 13, 150, 10.1016/j.procir.2014.04.026 Pawade, 2008, Effect of machining parameters and cutting edge geometry on surface integrity of high-speed turned Inconel 718, Int. J. Mach. Tools Manuf., 48, 15, 10.1016/j.ijmachtools.2007.08.004 Yan, 2012, Analytical modeling of the effect of the tool flank wear width on the residual stress distribution, Mach. Sci. Technol., 16, 265, 10.1080/10910344.2012.673973 Choi, 2010, Influence of tool flank wear on performance of finish hard machined surfaces in rolling contact, Int. J. Fatigue, 32, 390, 10.1016/j.ijfatigue.2009.07.014 Mantle, 2001, Surface integrity of a high speed milled gamma titanium aluminide, J. Mater. Process. Technol., 118, 143, 10.1016/S0924-0136(01)00914-1 Chen, 2004, Modelling the effects of flank wear land and chip formation on residual stresses, CIRP Ann. Manuf. Technol., 53, 95, 10.1016/S0007-8506(07)60653-2 Tan, 2017, Evolution and empirical modeling of compressive residual stress profile after milling, polishing and shot peening for TC17 alloy, J. Manuf. Process., 26, 155, 10.1016/j.jmapro.2017.02.002 Peng, 2014, Influence of dry cut and tool wear on residual stresses in high speed machining of nickel-based superalloy, Mater. Sci. Forum Trans. Tech. Publ., 768, 470