Synthesis of ternary binders and sand-binder ratio on the mechanical and microstructural properties of geopolymer foamed concrete

Davidovits, 2015, False values on CO2 emission for geopolymer cement/concrete published in scientific papers, Technical paper, 24, 1 Alnahhal, 2020, Evolution of flow properties, plastic viscosity, and yield stress of alkali-activated fly ash/slag pastes, RILEM Technical Letters, 5, 141, 10.21809/rilemtechlett.2020.123 Darvish, 2020, Performance evaluation of palm oil clinker sand as replacement for conventional sand in geopolymer mortar, Constr. Build. Mater., 258, 10.1016/j.conbuildmat.2020.120352 McGrath, 2018, Life cycle assessment of geopolymer concrete: A Malaysian context Davidovits, J. Environmentally driven geopolymer cement applications. in Proceedings of 2002 Geopolymer Conference. Melbourne. Australia. 2002. McLellan, 2011, Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement, J. Cleaner Prod., 19, 1080, 10.1016/j.jclepro.2011.02.010 Shah, 2021, Lightweight foamed concrete as a promising avenue for incorporating waste materials: A review, Resour. Conserv. Recycl., 164, 10.1016/j.resconrec.2020.105103 Darvish, 2020, Volume based design approach for sustainable palm oil clinker as whole replacement for conventional sand in mortar, J. Build. Eng., 32 Alnahhal, 2021, Synthesis of sustainable lightweight foamed concrete using palm oil fuel ash as a cement replacement material, J. Build. Eng., 35 Radwan, M.K.H., et al., Eco-mechanical performance of binary and ternary cement blends containing fly ash and slag. Proceedings of the Institution of Civil Engineers - Engineering Sustainability, 2020: p. 1-14 DOI: 10.1680/jensu.20.00009. Karim, 2017, Characterization of palm oil clinker powder for utilization in cement-based applications, Constr. Build. Mater., 135, 21, 10.1016/j.conbuildmat.2016.12.158 Kanadasan, 2015, Utilization of palm oil clinker as cement replacement material, Materials, 8, 8817, 10.3390/ma8125494 Ranjbar, 2014, Compressive strength and microstructural analysis of fly ash/palm oil fuel ash based geopolymer mortar under elevated temperatures, Constr. Build. Mater., 65, 114, 10.1016/j.conbuildmat.2014.04.064 Ranjbar, 2014, Compressive strength and microstructural analysis of fly ash/palm oil fuel ash based geopolymer mortar, Mater. Des., 59, 532, 10.1016/j.matdes.2014.03.037 Chindaprasirt, 2009, Comparative study on the characteristics of fly ash and bottom ash geopolymers, Waste Manage., 29, 539, 10.1016/j.wasman.2008.06.023 Osholana, 2020, Enhanced reactivity of geopolymers produced from fluidized bed combustion bottom ash, S. Afr. J. Chem. Eng., 34, 72 Morla, 2021, Corrosion Evaluation of Geopolymer Concrete Made with Fly Ash and Bottom Ash, Sustainability, 13, 398, 10.3390/su13010398 Alnahhal, 2017, Evaluation of industrial by-products as sustainable pozzolanic materials in recycled aggregate concrete, Sustainability, 9, 767, 10.3390/su9050767 Abraham, 2022, Performance evaluation of cellular lightweight concrete using palm oil industrial waste as cement and fine aggregate replacement materials, Mater. Today:. Proc., 52, 902 Darvish, 2021, Enunciation of size effect of sustainable palm oil clinker sand on the characteristics of cement and geopolymer mortars, J. Build. Eng., 44 Lim, 2017, Utilizing high volumes quarry wastes in the production of lightweight foamed concrete, Constr. Build. Mater., 151, 441, 10.1016/j.conbuildmat.2017.06.091 Abdullah, 2012, Fly ash-based geopolymer lightweight concrete using foaming agent, Int. J. Mol. Sci., 13, 7186, 10.3390/ijms13067186 Pasupathy, 2021, Influence of recycled concrete aggregate on the foam stability of aerated geopolymer concrete, Constr. Build. Mater., 271, 10.1016/j.conbuildmat.2020.121850 Ramakrishnan, 2021, Synthesis and properties of thermally enhanced aerated geopolymer concrete using form-stable phase change composite, J. Build. Eng., 10.1016/j.jobe.2021.102756 Alnahhal, 2022, Engineering performance of sustainable geopolymer foamed and non-foamed concretes, Constr. Build. Mater., 316, 10.1016/j.conbuildmat.2021.125601 Abdollahnejad, 2015, Mix design, properties and cost analysis of fly ash-based geopolymer foam, Constr. Build. Mater., 80, 18, 10.1016/j.conbuildmat.2015.01.063 Zhang, 2014, Geopolymer foam concrete: An emerging material for sustainable construction, Constr. Build. Mater., 56, 113, 10.1016/j.conbuildmat.2014.01.081 Van Deventer, 2012, Technical and commercial progress in the adoption of geopolymer cement, Miner. Eng., 29, 89, 10.1016/j.mineng.2011.09.009 Haseli, 2020, Evaluation of modulus of elasticity of date palm sandwich panels using ultrasonic wave velocity and experimental models, Measurement, 149, 10.1016/j.measurement.2019.107016 Roviello, 2017, Lightweight geopolymer-based hybrid materials, Compos. B Eng., 128, 225, 10.1016/j.compositesb.2017.07.020 Dhasindrakrishna, 2021, Progress, current thinking and challenges in geopolymer foam concrete technology, Cem. Concr. Compos., 116, 10.1016/j.cemconcomp.2020.103886 Alnahhal, 2018, Assessment on engineering properties and CO2 emissions of recycled aggregate concrete incorporating waste products as supplements to Portland cement, J. Cleaner Prod., 203, 822, 10.1016/j.jclepro.2018.08.292 Abutaha, 2018, Adopting particle-packing method to develop high strength palm oil clinker concrete, Resour. Conserv. Recycl., 131, 247, 10.1016/j.resconrec.2017.11.031 Karim, 2016, Thermal activation effect on palm oil clinker properties and their influence on strength development in cement mortar, Constr. Build. Mater., 125, 670, 10.1016/j.conbuildmat.2016.08.092 Suksiripattanapong, 2020, Properties of cellular lightweight high calcium bottom ash-portland cement geopolymer mortar, Case Stud. Constr. Mater., 12 Hajimohammadi, 2018, Sustainable one-part geopolymer foams with glass fines versus sand as aggregates, Constr. Build. Mater., 171, 223, 10.1016/j.conbuildmat.2018.03.120 Wongsa, 2017, Use of municipal solid waste incinerator (MSWI) bottom ash in high calcium fly ash geopolymer matrix, J. Cleaner Prod., 148, 49, 10.1016/j.jclepro.2017.01.147 Liu, 2014, Evaluation of thermal conductivity, mechanical and transport properties of lightweight aggregate foamed geopolymer concrete, Energy Build., 72, 238, 10.1016/j.enbuild.2013.12.029 Khankhaje, 2016, On blended cement and geopolymer concretes containing palm oil fuel ash, Mater. Des., 89, 385, 10.1016/j.matdes.2015.09.140 Nayaka, 2018, High volume cement replacement by environmental friendly industrial by-product palm oil clinker powder in cement–lime masonry mortar, J. Cleaner Prod., 190, 272, 10.1016/j.jclepro.2018.03.291 Ahmmad, 2017, Feasibility study on the use of high volume palm oil clinker waste in environmental friendly lightweight concrete, Constr. Build. Mater., 135, 94, 10.1016/j.conbuildmat.2016.12.098 Abutaha, 2017, Effect of coating palm oil clinker aggregate on the engineering properties of normal grade concrete, Coatings, 7, 175, 10.3390/coatings7100175 Lim, 2013, Fresh and hardened properties of lightweight foamed concrete with palm oil fuel ash as filler, Constr. Build. Mater., 46, 39, 10.1016/j.conbuildmat.2013.04.015 Mohammadhosseini, 2018, Strength and transport properties of concrete composites incorporating waste carpet fibres and palm oil fuel ash, J. Build. Eng., 20, 156, 10.1016/j.jobe.2018.07.013 Kockal, 2011, Strength and elastic properties of structural lightweight concretes, Mater. Des., 32, 2396, 10.1016/j.matdes.2010.12.053 Falliano, 2019, Compressive and flexural strength of fiber-reinforced foamed concrete: Effect of fiber content, curing conditions and dry density, Constr. Build. Mater., 198, 479, 10.1016/j.conbuildmat.2018.11.197 Altwair, 2012, Flexural performance of green engineered cementitious composites containing high volume of palm oil fuel ash, Constr. Build. Mater., 37, 518, 10.1016/j.conbuildmat.2012.08.003 Yang, 2000, Properties of concrete with a new type of saponin air-entraining agent, Cem. Concr. Res., 30, 1313, 10.1016/S0008-8846(00)00340-9 Wu, 2017, Comparative study on flexural properties of ultra-high performance concrete with supplementary cementitious materials under different curing regimes, Constr. Build. Mater., 136, 307, 10.1016/j.conbuildmat.2017.01.052 Phoo-ngernkham, 2016, Flexural strength of notched concrete beam filled with alkali-activated binders under different types of alkali solutions, Constr. Build. Mater., 127, 673, 10.1016/j.conbuildmat.2016.10.053 Pauw, A., Static modulus of elasticity of concrete as affected by density. 1960: University of Missouri. Kozłowski, 2018, Mechanical Characterization of Lightweight Foamed Concrete, Adv. Mater. Sci. Eng., 2018, 1, 10.1155/2018/6801258 Lokuge, 2013, Effect of fly ash on the behaviour of polymer concrete with different types of resin, Mater. Des., 51, 175, 10.1016/j.matdes.2013.03.078 Sajan, 2021, Combined effect of curing temperature, curing period and alkaline concentration on the mechanical properties of fly ash-based geopolymer, Clean. Mater., 1 Nguyen, 2019, A micromechanical investigation for the effects of pore size and its distribution on geopolymer foam concrete under uniaxial compression, Eng. Fract. Mech., 209, 228, 10.1016/j.engfracmech.2019.01.033 Haq, 2016, Intumescence behaviour of bottom ash based geopolymer mortar through microwave irradiation – As affected by alkali activation, Constr. Build. Mater., 126, 951, 10.1016/j.conbuildmat.2016.08.135 Gupta, 2017, Effect of elevated temperature and cooling regimes on mechanical and durability properties of concrete containing waste rubber fiber, Constr. Build. Mater., 137, 35, 10.1016/j.conbuildmat.2017.01.065 Rafieizonooz, 2016, Investigation of coal bottom ash and fly ash in concrete as replacement for sand and cement, Constr. Build. Mater., 116, 15, 10.1016/j.conbuildmat.2016.04.080 Bouaissi, 2019, Mechanical properties and microstructure analysis of FA-GGBS-HMNS based geopolymer concrete, Constr. Build. Mater., 210, 198, 10.1016/j.conbuildmat.2019.03.202 Ryu, 2013, The mechanical properties of fly ash-based geopolymer concrete with alkaline activators, Constr. Build. Mater., 47, 409, 10.1016/j.conbuildmat.2013.05.069 Rajak, 2015, Morphological characteristics of hardened cement pastes incorporating nano-palm oil fuel ash, Procedia Manuf., 2, 512, 10.1016/j.promfg.2015.07.088 Kasaniya, 2021, Pozzolanic reactivity of natural pozzolans, ground glasses and coal bottom ashes and implication of their incorporation on the chloride permeability of concrete, Cem. Concr. Res., 139, 10.1016/j.cemconres.2020.106259 Rosas-Casarez, 2014, Experimental study of XRD, FTIR and TGA techniques in geopolymeric materials, Int. J. Adv. Comput. Sci. Appl, 4, 221 Zhang, 2021, Fracture properties and microstructure formation of hardened alkali-activated slag/fly ash pastes, Cem. Concr. Res., 144, 10.1016/j.cemconres.2021.106447 Zhang, 2017, Waste glass as partial mineral precursor in alkali-activated slag/fly ash system, Cem. Concr. Res., 102, 29, 10.1016/j.cemconres.2017.08.012 Wang, 2022, Study of acidic degradation of alkali-activated materials using synthetic C-(N)-ASH and NASH gels, Compos. B Eng., 230, 10.1016/j.compositesb.2021.109510