Extrusion-based additive manufacturing with cement-based materials – Production steps, processes, and their underlying physics: A review

Wangler, 2016, Digital concrete: opportunities and challenges, RILEM Technical Letter, 67, 10.21809/rilemtechlett.2016.16 De Schutter, 2018, Vision of 3D printing with concrete — technical, economic and environmental potentials, Cem. Concr. Res., 112, 25, 10.1016/j.cemconres.2018.06.001 Buswell, 2007, Freeform construction: mega-scale rapid manufacturing for construction, Autom. Constr., 16, 224, 10.1016/j.autcon.2006.05.002 Mechtcherine, 2019, Large-scale digital concrete construction – CONPrint3D concept for on-site, monolithic 3D-printing, Automation in Construction, 107, 10.1016/j.autcon.2019.102933 Lowke, 2018, Particle-bed 3D printing in concrete construction – possibilities and challenges, Cem. Concr. Res., 112, 50, 10.1016/j.cemconres.2018.05.018 Salet, 2018, Design of a 3D printed concrete bridge by testing, Virtual and Physical Prototyping, 13, 222, 10.1080/17452759.2018.1476064 Valencia Buswell, 2020, A process classification framework for defining and describing digital fabrication with concrete, Cem. Concr. Res., 10.1016/j.cemconres.2020.106068 Buswell, 2018, 3D printing using concrete extrusion: a roadmap for research, Cem. Concr. Res., 112, 37, 10.1016/j.cemconres.2018.05.006 Roussel, 2018, Rheological requirements for printable concretes, Cem. Concr. Res., 112, 76, 10.1016/j.cemconres.2018.04.005 Kovler, 2011, Properties of fresh and hardened concrete, Cem. Concr. Res., 41, 775, 10.1016/j.cemconres.2011.03.009 Roussel, 2010, Steady state flow of cement suspensions: a micromechanical state of the art, Cem. Concr. Res., 40, 77, 10.1016/j.cemconres.2009.08.026 De Schutter, 2016, Pumping of fresh concrete: insights and challenges, RILEM Technical Letters, 1, 76, 10.21809/rilemtechlett.2016.15 Roussel, 2005, “Fifty-cent rheometer” for yield stress measurements: from slump to spreading flow, J. Rheol., 49, 705, 10.1122/1.1879041 Perrot, 2016, Structural built-up of cement-based materials used for 3D-printing extrusion techniques, Mater. Struct., 49, 1213, 10.1617/s11527-015-0571-0 Ovarlez, 2006, A physical model for the prediction of lateral stress exerted by self-compacting concrete on formwork, Mater. Struct., 39, 269, 10.1617/s11527-005-9052-1 Wolfs, 2018, Early age mechanical behaviour of 3D printed concrete: numerical modelling and experimental testing, Cem. Concr. Res., 106, 103, 10.1016/j.cemconres.2018.02.001 Mettler, 2016, Evolution of strength and failure of SCC during early hydration, Cem. Concr. Res., 89, 288, 10.1016/j.cemconres.2016.09.004 Gosselin, 2016, Large-scale 3D printing of ul-tra-high performance concrete – a new processing route for architects and builders, Mater. Des., 100, 102, 10.1016/j.matdes.2016.03.097 Lo Monte, 2020, Correlation between “very early” age fracture performance and evolution of rheological properties of high performance fiber reinforced cementitious composites with adapted rheology Nerella, 2019, Inline quantification of extrudability of cementitious materials for digital construction, Cem. Concr. Compos., 95, 260, 10.1016/j.cemconcomp.2018.09.015 Mechtcherine, 2020, Fresh state requirements to 3D-printable cement-based materials, Construction Printing Technology, 1, 10 Jo, 2012, A computational approach to estimating a lubricating layer in concrete pumping, Computers, Materials and Continua, 27, 189 Secrieru, 2020, Assessment and prediction of concrete flow and pumping pressure in pipeline, Cem. Concr. Comp., 107, 10.1016/j.cemconcomp.2019.103495 Nerella, 2018, Virtual Sliding Pipe Rheometer for estimating pumpability of concrete, Constr. Build. Mater., 170, 366, 10.1016/j.conbuildmat.2018.03.003 Kwon, 2013, Prediction of concrete pumping: part II — analytical prediction and experimental verification, ACI Mater. J., 110, 657 Kaplan, 2005, Design of concrete pumping circuit, ACI Mater. J., 102, 110 Choi, 2013, Prediction on pipe flow of pumped concrete based on shear-induced particle migration, Cem. Concr. Res., 52, 216, 10.1016/j.cemconres.2013.07.004 Yammine, 2008, From ordinary rhelogy concrete to self compacting concrete: a transition between frictional and hydrodynamic interactions, Cem. Concr. Res., 38, 890, 10.1016/j.cemconres.2008.03.011 Perrot, 2009, Vibro-extrusion: a new forming process for cement-based materials, Adv. Cem. Res., 21, 125, 10.1680/adcr.2008.00030 Secrieru, 2017, Study on concrete pumpability combining different laboratory tools and linkage to rheology, Constr. Build. Mater., 144, 451, 10.1016/j.conbuildmat.2017.03.199 Banfill, 2011, Rheology and vibration of fresh concrete: predicting the radius of action of poker vibrators from wave propagation, Cem. Concr. Res., 41, 932, 10.1016/j.cemconres.2011.04.011 Perrot, 2014, Prediction of the ram extrusion force of cement-based materials, Appl. Rheol., 24 Choi, 2014, Prediction of concrete pumping using various rheological models, International Journal of Concrete Structures and Materials, 8, 269, 10.1007/s40069-014-0084-1 Zhan, 2019, Numerical study on concrete pumping behavior via local flow simulation with discrete element method, Materials, 12, 1, 10.3390/ma12091415 Rabideau, 2010, The extrusion of a model yield stress fluid imaged by MRI velocimetry, J. Non-Newtonian Fluid Mech., 165, 394, 10.1016/j.jnnfm.2010.01.015 de Souza Mendes, 2007, Flow of viscoplastic liquids through axisymmetric expansions–contractions, J. Non-Newtonian Fluid Mech., 142, 207, 10.1016/j.jnnfm.2006.09.007 Jay, 2002, Numerical simulation of viscoplastic fluid flows through an axisymmetric contraction, J. Fluids Eng., 124, 700, 10.1115/1.1486472 Abdali, 1992, Entry and exit flows of Bingham fluids, J. Rheol., 36, 389, 10.1122/1.550350 Mitsoulis, 1993, Flow simulation of herschel-bulkley fluids through extrusion dies, Can. J. Chem. Eng., 71, 147, 10.1002/cjce.5450710120 Perrot, 2019, Extrusion of cement-based materials - an overview, RILEM Technical Letters, 3, 91, 10.21809/rilemtechlett.2018.75 Rabideau, 2012, Internal flow characteristics of a plastic kaolin suspension during extrusion, J. Am. Ceram. Soc., 95, 494, 10.1111/j.1551-2916.2011.04882.x Khelifi, 2013, Prediction of extrusion load and liquid phase filtration during ram extrusion of high solid volume fraction pastes, Powder Technol., 249, 258, 10.1016/j.powtec.2013.08.023 Grampeix, 2013 Mélinge, 2013, Study of tribological behaviour of fresh mortar against a rigid plane wall, Eur. J. Environ. Civ. Eng., 17, 419, 10.1080/19648189.2013.786242 Mortreuil, 2000, Utilisation des propriétés électriques des pâtes céramiques pour leur extrusion, 88 Nair, 2016, Real time control of fresh cement paste stiffening: smart cement-based materials via a magnetorheological approach, Rheol. Acta, 55, 571, 10.1007/s00397-016-0923-x Bos, 2019, Large scale testing of digitally fabricated concrete (DFC) elements, 129 Perrot, 2012, Use of ram extruder as a combined rheo-tribometer to study the behaviour of high yield stress fluids at low strain rate, Rheol. Acta, 51, 743, 10.1007/s00397-012-0638-6 Leal da Silva, 2019, Evaluation of early-age concrete structural build-up for 3D concrete printing by oscillatory rheometry, vol. 975, 35 Wangler, 2020, Residence time distributions in continuous processing of concrete, 23, 448 Bessaies-Bey, 2016, Organic admixtures and cement particles: competitive adsorption and its macroscopic rheological consequences, Cem. Concr. Res., 80, 1, 10.1016/j.cemconres.2015.10.010 Espacenet Espacenet 2014, 15 Roussel, 2007, Computational modeling of concrete flow: general overview, Cem. Concr. Res., 37, 1298, 10.1016/j.cemconres.2007.06.007 Krenzer, 2019, Simulating mixing processes of fresh concrete using the discrete element method (DEM) under consideration of water addition and changes in moisture distribution, Cem. Concr. Res., 115, 274, 10.1016/j.cemconres.2018.05.012 Le, 2012, Mix design and fresh properties for high-performance printing concrete, Mater. Struct., 45, 1221, 10.1617/s11527-012-9828-z Lim, 2012, Developments in construction-scale additive manufacturing processes, Autom. Constr., 21, 262, 10.1016/j.autcon.2011.06.010 Suiker, 2020, Elastic buckling and plastic collapse during 3D concrete printing, Cem. Concr. Res., 10.1016/j.cemconres.2020.106016 Wolfs, 2019, Triaxial compression testing on ear-ly age concrete for numerical analysis of 3D concrete printing, Cem. Concr. Comp., 104, 10.1016/j.cemconcomp.2019.103344 Irgens, 2008 Carlo, 2013, Experimental and numerical techniques to characterize structural properties of fresh concrete Suiker, 2018, Mechanical performance of wall structures in 3D printing processes: theory, design tools and experiments, Int. J. Mech. Sci., 137, 145, 10.1016/j.ijmecsci.2018.01.010 Chaves Figueiredo, 2019, An approach to develop printable strain hardening cementitious composites, Materials & Design, 169, 10.1016/j.matdes.2019.107651 Jeong, 2019, Rheological property criteria for buildable 3D printing concrete, Materials, 12, 10.3390/ma12040657 Kruger, 2019, An ab initio approach for thixotropy characterisation of (nanoparticle-infused) 3D printable concrete, Constr. Build. Mater., 224, 372, 10.1016/j.conbuildmat.2019.07.078 Paul, 2018, Fresh and hardened properties of 3D printable cementitious materials for building and construction, Archives of Civil and Mechanical Engineering, 18, 311, 10.1016/j.acme.2017.02.008 Panda, 2018, Experimental study on mix proportion and fresh properties of fly ash based geo-polymer for 3D concrete printing, Ceram. Int., 44, 10258, 10.1016/j.ceramint.2018.03.031 Zhu, 2019, Development of 3D printable engineered cementitious composites with ultra-high tensile ductility for digital construction, Materials & Design, 181, 10.1016/j.matdes.2019.108088 Wolfs, 2018, Correlation between destructive compression tests and non-destructive ultrasonic measurements on early age 3D printed concrete, Constr. Build. Mater., 181, 447, 10.1016/j.conbuildmat.2018.06.060 Zhang, 2018, Fresh properties of a novel 3D printing concrete ink, Constr. Build. Mater., 174, 263, 10.1016/j.conbuildmat.2018.04.115 Panda, 2019, Mechanical properties and deformation behaviour of early age concrete in the context of digital construction, Composites Part B, 165, 563, 10.1016/j.compositesb.2019.02.040 Bos, 2019, The influence of material temperature on the in-print strength and stability of a 3D print mortar, 425 Comminal, 2018, Numerical modeling of the strand deposition flow in extrusion-based additive manufacturing, Additive Manufacturing, 20, 68, 10.1016/j.addma.2017.12.013 Hovad, 2016, Simulating the DISAMATIC process using the Discrete Element Method – a dynamical study of granular flow, Powder Technol., 303, 228, 10.1016/j.powtec.2016.09.039 Mechtcherine, 2014, Simulation of fresh concrete flow using Discrete Element Method (DEM): theory and applications, Mater. Struct., 47, 615, 10.1617/s11527-013-0084-7 Nerella, 2019, Strain-based approach for measuring structural build-up of cement pastes in the context of digital construction, Cem. Concr. Res., 115, 530, 10.1016/j.cemconres.2018.08.003 Ivanova, 2020, Evaluation of structural build-up rate of cementitious materials by means of constant shear rate test: parameter study, 209 Ivanova, 2020, Possibilities and challenges of constant shear rate test for evaluation of structural build-up rate of cementitious materials, Cem. Concr. Res., 130, 10.1016/j.cemconres.2020.105974 Roussel, 2012, The origins of thixotropy of fresh cement pastes, Cem. Concr. Res., 42, 148, 10.1016/j.cemconres.2011.09.004 Roussel, 2006, A thixotropy model for fresh fluid concretes: theory, validation and applications, Cem. Concr. Res., 36, 1797, 10.1016/j.cemconres.2006.05.025 Roussel, 2005, Steady and transient flow behaviour of fresh cement pastes, Cem. Concr. Res., 35, 1656, 10.1016/j.cemconres.2004.08.001 Subramaniam, 2010, An investigation of microstructure evolution in cement paste through setting using ultrasonic and rheological measurements, Cem. Concr. Res., 40, 33, 10.1016/j.cemconres.2009.09.018 Perrot, 2014, Prediction of lateral form pressure exerted by concrete at low casting rates, Mater. Struct., 48, 1 Lecompte, 2017, Non-linear modelling of yield stress increase due to SCC structural build-up at rest, Cem. Concr. Res., 92, 92, 10.1016/j.cemconres.2016.11.020 Mantellato, 2019, Relating early hydration, specific surface and flow loss of cement pastes, Material and Structures, 52 Rubio, 2017, 3D printing of fibre cement-based materials: fresh and rheological performances, 284 Secrieru, 2018, Changes in concrete properties during pumping and formation of lubricating material under pressure, Cem. Concr. Res., 108, 129, 10.1016/j.cemconres.2018.03.018 Feys, 2009 Mechtcherine, 2014, Testing pumpability of concrete using Sliding Pipe Rheometer, Constr. Build. Mater., 53, 312, 10.1016/j.conbuildmat.2013.11.037 Mechtcherine, 2017