Surface modification of polypropylene microporous membrane to improve its antifouling characteristics in an SMBR: Air plasma treatment

Hu, 2006, Enhancing the hydrophilicity of polypropylene microporous membranes by the grafting of 2-hydroxyethyl methacrylate via a synergistic effect of photoinitiators, J. Membr. Sci., 285, 196, 10.1016/j.memsci.2006.08.023 Yang, 2005, Surface modification of polypropylene microporous membranes with a novel glycopolymer, Chem. Mater., 17, 3050, 10.1021/cm048012x Rajam, 2006, Graft coupling of PEO to mixed cellulose esters microfiltration membranes by UV irradiation, J. Membr. Sci., 281, 211, 10.1016/j.memsci.2006.03.034 Kim, 2006, Plasma treatment of polypropylene and polysulfone supports for thin film composite reverse osmosis membrane, J. Membr. Sci., 286, 193, 10.1016/j.memsci.2006.09.037 Abrol, 2007, Characterization of an anion-exchange porous polypropylene hollow fiber membrane for immobilization of ABL lipase, J. Biotechnol., 128, 838, 10.1016/j.jbiotec.2006.12.031 Fisher, 2004, A review of plasma-surface interactions during processing of polymeric materials measured using the IRIS technique, Plasma Process. Polym., 1, 13, 10.1002/ppap.200400011 Siow, 2006, Plasma methods for the generation of chemically reactive surfaces for biomolecule immobilization and cell colonization—a review, Plasma Process. Polym., 3, 392, 10.1002/ppap.200600021 Zhan, 2004, Modification of a membrane surface charge by a low temperature plasma induced grafting reaction and its application to reduce membrane fouling, Sep. Sci. Technol., 39, 2977, 10.1081/SS-200035950 Zhao, 2004, Nanofiltration membrane prepared from polyacrylonitrile ultrafiltration membrane by low-temperature plasma I. Graft of acrylic acid in gas, J. Membr. Sci., 232, 1, 10.1016/j.memsci.2003.11.009 Kang, 2001, Surface modification of polypropylene membrane by low-temperature plasma treatment, J. Appl. Polym. Sci., 81, 1555, 10.1002/app.1585 Lazea, 2005, Modification of polyester track membranes by plasma treatments, Surf. Coat. Technol., 200, 529, 10.1016/j.surfcoat.2005.01.120 Riccardi, 2003, Surface modification of poly(ethylene terephthalate) fibers induced by radio frequency air plasma treatment, Appl. Surf. Sci., 211, 386, 10.1016/S0169-4332(03)00265-4 Dmitriev, 2002, Water permeability of poly(ethylene) terephthalate track membranes modified in plasma, Desalination, 146, 279, 10.1016/S0011-9164(02)00487-3 Holbrook, 2005, A comparison of membrane bioreactor and conventional-activated-sludge mixed liquor and biosolids characteristics, Water Environ. Res., 77, 323, 10.1002/j.1554-7531.2005.tb00291.x Rezania, 2007, Hydrogen-dependent denitrification of water in an anaerobic submerged membrane bioreactor coupled with a novel hydrogen delivery system, Water Res., 41, 1074, 10.1016/j.watres.2006.11.016 Wisniewski, 2007, Membrane bioreactor for water reuse, Desalination, 203, 15, 10.1016/j.desal.2006.05.002 Mercier-Bonin, 2001, How unsteady filtration conditions can improve the process efficiency during cell cultures in membrane bioreactors, Sep. Purif. Technol., 22–23, 601, 10.1016/S1383-5866(00)00166-0 Chua, 2002, Controlling fouling in membrane bioreactors operated with a variable throughput, Desalination, 149, 225, 10.1016/S0011-9164(02)00764-6 Zhang, 2007, Influence of cleaning frequency and membrane history on fouling in an anaerobic membrane bioreactor, Desalination, 207, 153, 10.1016/j.desal.2006.07.009 Yu, 2005, Surface modification of polypropylene microporous membrane to improve its antifouling property in MBR: CO2 plasma treatment, J. Membr. Sci., 254, 219, 10.1016/j.memsci.2005.01.010 Yu, 2005, Surface modification of polypropylene microporous membranes to improve their antifouling property in MBR: NH3 plasma treatment, Sep. Purif. Technol., 45, 8, 10.1016/j.seppur.2005.01.012 Bryjak, 2002, Modification of polysulfone membranes 4. Ammonia plasma treatment, Eur. Polym. J., 38, 717, 10.1016/S0014-3057(01)00236-1 Steen, 2002, Hydrophilic modification of polymeric membranes by low temperature H2O plasma treatment, J. Membr. Sci., 204, 341, 10.1016/S0376-7388(02)00061-3 Calvo, 1995, Pore size distributions in microporous membranes: I. Surface study of track-etched filters by image analysis, J. Colloid Interf. Sci., 175, 138, 10.1006/jcis.1995.1439 Tansel, 2004, SEM study of phenolphthalein adsorption on granular activated carbon, Adv. Environ. Res., 8, 411, 10.1016/S1093-0191(02)00126-0 Marinoni, 2005, Characterisation of mortar morphology in thin sections by digital image processing, Cement Concrete Res., 35, 1613, 10.1016/j.cemconres.2004.09.015 Shim, 2001, Surface modification of polypropylene membranes by [gamma]-ray induced graft copolymerization and their solute permeation characteristics, J. Membr. Sci., 190, 215, 10.1016/S0376-7388(01)00445-8 Chang, 2001, Effects of membrane fouling on solute rejection during membrane filtration of activated sludge, Process Biochem., 36, 855, 10.1016/S0032-9592(00)00284-3 Chang, 1999, Membrane filtration characteristics in membrane-coupled activated sludge system: The effect of floc structure on membrane fouling, Sep. Sci. Technol., 34, 1743, 10.1081/SS-100100736 Kwon, 2006, Comparison of the surface characteristics of polypropylene films treated by Ar and mixed gas (Ar/O2) atmospheric pressure plasma, J. Colloid Interface Sci., 295, 409, 10.1016/j.jcis.2005.11.007 Weibel, 2007, Surface modification of polyurethane membranes using acrylic acid vapour plasma and its effects on the pervaporation processes, J. Membr. Sci., 293, 124, 10.1016/j.memsci.2007.02.005 De Geyter, 2007, Treatment of polymer films with a dielectric barrier discharge in air, helium and argon at medium pressure, Surf. Coat. Technol., 201, 7066, 10.1016/j.surfcoat.2007.01.008 Gancarz, 2000, Modification of polysulfone membranes 3. Effect of nitrogen plasma, Eur. Polym. J., 36, 1563, 10.1016/S0014-3057(99)00240-2 Wavhal, 2002, Modification of porous poly(ether sulfone) membranes by low-temperature CO2-plasma treatment, J. Polym. Sci. Poly. Phys., 40, 2473, 10.1002/polb.10308 Kir, 2006, Preparation of poly(2-chloroaniline) membrane and plasma surface modification, Appl. Surf. Sci., 252, 3574, 10.1016/j.apsusc.2005.05.027 Wavhal, 2002, Hydrophilic modification of polyethersulfone membranes by low temperature plasma-induced graft polymerization, J. Membr. Sci., 209, 255, 10.1016/S0376-7388(02)00352-6 Dmitriev, 1998, Modification of track membrane structure by plasma etching, Nucl. Instrum. Meth. B, 142, 43, 10.1016/S0168-583X(98)00203-1 Wavhal, 2003, Membrane surface modification by plasma-induced polymerization of acrylamide for improved surface properties and reduced protein fouling, Langmuir, 19, 79, 10.1021/la020653o Patankar, 2003, On the modeling of hydrophobic contact angles on rough surfaces, Langmuir, 19, 1249, 10.1021/la026612+ Kaminska, 2002, The influence of side groups and polarity of polymers on the kind and effectiveness of their surface modification by air plasma action, Eur. Polym. J., 38, 1915, 10.1016/S0014-3057(02)00059-9 Gancarz, 1999, Modification of polysulfone membranes 1. CO2 plasma treatment, Eur. Polym. J., 35, 1419, 10.1016/S0014-3057(98)00240-7 Yu, 2007, Photoinduced graft polymerization of acrylamide on polypropylene microporous membranes for the improvement of antifouling characteristics in a submerged membrane-bioreactor, Sep. Purif. Technol., 53, 119, 10.1016/j.seppur.2006.07.002 Choi, 2005, Effect of permeate flux and tangential flow on membrane fouling for wastewater treatment, Sep. Purif. Technol., 45, 68, 10.1016/j.seppur.2005.02.010 Elmaleh, 1998, Experimental test to evaluate performance of an anaerobic reactor provided with an external membrane unit, Water Sci. Technol., 38, 385, 10.2166/wst.1998.0829 le Roux, 2005, Use of chitosan as an antifouling agent in a membrane bioreactor, J. Membr. Sci., 248, 127, 10.1016/j.memsci.2004.10.005 Metzger, 2007, Characterisation of polymeric fouling in membrane bioreactors and the effect of different filtration modes, J. Membr. Sci., 301, 180, 10.1016/j.memsci.2007.06.016 Jeison, 2007, Cake formation and consolidation: main factors governing the applicable flux in anaerobic submerged membrane bioreactors (AnSMBR) treating acidified wastewaters, Sep. Purif. Technol., 56, 71, 10.1016/j.seppur.2007.01.022 Taniguchi, 2003, Low fouling synthetic membranes by UV-assisted graft polymerization: monomer selection to mitigate fouling by natural organic matter, J. Membr. Sci., 222, 59, 10.1016/S0376-7388(03)00192-3 Yu, 2006, Flux enhancement for polypropylene microporous membrane in a SMBR by the immobilization of poly(N-vinyl-2-pyrrolidone) on the membrane surface, J. Membr. Sci, 279, 148, 10.1016/j.memsci.2005.11.046 Kuberkar, 2000, Modeling of fouling reduction by secondary membranes, J. Membr. Sci., 168, 243, 10.1016/S0376-7388(99)00324-5 Yu, 2008, Surface modification of poly(propylene) microporous membrane to improve its antifouling characteristics in an SMBR: O2 plasma treatment, Plasma Process. Polym., 5, 84, 10.1002/ppap.200700051 Le-Clech, 2006, Fouling in membrane bioreactors used in wastewater treatment, J. Membr. Sci., 284, 17, 10.1016/j.memsci.2006.08.019 Yu, 2006, Improvement of the antifouling characteristics for polypropylene microporous membranes by the sequential photoinduced graft polymerization of acrylic acid, J. Membr. Sci., 281, 658, 10.1016/j.memsci.2006.04.036 Yu, 2008, Mitigated membrane fouling in an SMBR by surface modification, J. Membr. Sci., 310, 409, 10.1016/j.memsci.2007.11.017