Workability & mechanical properties of the single and hybrid basalt fiber reinforced volcanic ash-based cement mortars after freeze–thaw cycles

Ayub, 2021, Promoting sustainable cleaner production paradigms in palm oil fuel ash as an eco-friendly cementitious material: a critical analysis, J Clean Prod, 295, 10.1016/j.jclepro.2021.126296 Paris, 2016, A review of waste products utilized as supplements to Portland cement in concrete, J Clean Prod, 121, 1, 10.1016/j.jclepro.2016.02.013 Kupwade-Patil, 2018, Impact of embodied energy on materials/buildings with partial replacement of ordinary portland cement (OPC) by natural Pozzolanic Volcanic Ash, J Clean Prod, 177, 547, 10.1016/j.jclepro.2017.12.234 De Brito, 2020, The past and future of sustainable concrete: a critical review and new strategies on cement-based materials, J Clean Prod, 123558 Silva, 2020, Admixtures potential role on the improvement of the freeze-thaw resistance of lime mortars, J Build Eng, 101977 Du, 2021, Effects of toluene-di-isocyanate microcapsules on the frost resistance and self-repairing capability of concrete under freeze-thaw cycles, J Build Eng, 44 Eriksson, 2021, Hygro-thermo-mechanical modeling of partially saturated air-entrained concrete containing dissolved salt and exposed to freeze-thaw cycles, Cem Concr Res, 141, 10.1016/j.cemconres.2020.106314 Baloch, 2021, A review on the durability of concrete-to-concrete bond in recent rehabilitated structures, J Build Eng, 44 Zou, 2020, Improvement in freeze-thaw durability of recycled aggregate permeable concrete with silane modification, Constr Build Mater, 121097 Yan, 2020, Study on the service life prediction of freeze–thaw damaged concrete with high permeability and inorganic crystal waterproof agent additions based on ultrasonic velocity, Constr Build Mater, 259, 10.1016/j.conbuildmat.2020.120405 Heshmati, 2017, Dependency of cohesive laws of a structural adhesive in Mode-I and Mode-II loading on moisture, freeze-thaw cycling, and their synergy, Mater Des, 122, 433, 10.1016/j.matdes.2017.03.016 Nematzadeh, 2021, Mechanical properties and durability of compressed nylon aggregate concrete reinforced with Forta-Ferro fiber: experiments and optimization, J Build Eng, 41 Siamardi, 2021, Evaluation the effect of micro-synthetic fiber on mechanical and freeze-thaw behavior of non-air-entrained roller compacted concrete pavement using response surface methodology, Constr Build Mater, 295, 10.1016/j.conbuildmat.2021.123628 Booya, 2019, Performance of engineered pulp fibre reinforced composites subjected to weathering conditions, J Build Eng, 25 Alaskar, 2021, Performance evaluation of high-strength concrete reinforced with basalt fibers exposed to elevated temperatures, J Build Eng, 35 Saradar, 2020, Prediction of mechanical properties of lightweight basalt fiber reinforced concrete containing silica fume and fly ash: experimental and numerical assessment, J Build Eng, 101732, 10.1016/j.jobe.2020.101732 Quagliarini, 2016, Basalt fiber ropes and rods: Durability tests for their use in building engineering, J Build Eng, 5, 142, 10.1016/j.jobe.2015.12.003 Xu, 2021, Development of basalt fiber engineered cementitious composites and its mechanical properties, Constr Build Mater, 266, 10.1016/j.conbuildmat.2020.121173 Zhao, 2018, Study on bending damage and failure of basalt fiber reinforced concrete under freeze-thaw cycles, Constr Build Mater, 163, 460, 10.1016/j.conbuildmat.2017.12.096 Fan, 2014, Experimental research on the Freeze-Thaw resistance of basalt fiber reinforced concrete, Adv Mat Res, 919–921, 1912 Jin, 2014, Experimental study on the performance of the basalt fiber concrete resistance to freezing and thawing, Appl Mech Mater, 584–586, 1304, 10.4028/www.scientific.net/AMM.584-586.1304 Li, 2020, Mechanical properties and freeze-thaw durability of basalt fiber reactive powder concrete, Appl Sci, 10, 5682, 10.3390/app10165682 TS EN 197-1, (2012) Overall Cement Types - Part 1: Overall Cement Types - Composition, Properties and Eligibility Criteria’s. Turkish Standards Institute. Ankara, Turkey. TS EN 196-1, 2009, Methods of testing cement-Part I: Determination of strength, Turkish Standard Institutions, Ankara, Turkey. ASTM C 618, (2003) Standard specification for coal fly ash and raw calcined natural pozzolan for use as a mineral admixture in concrete, American Society for Testing and Materials. ASTM International, West Conshohocken, PA, USA. Zeyad, 2019, Strength and transport characteristics of volcanic pumice powder based high strength concrete, Constr Build Mater, 216, 314, 10.1016/j.conbuildmat.2019.05.026 Al-Fadala, 2017, Significance of performance based specifications in the qualification and characterization of blended cement using volcanic ash, Constr Build Mater, 144, 532, 10.1016/j.conbuildmat.2017.03.180 Hossain, 2004, Residual strength and durability of volcanic ash concrete exposed to high temperature, Mater J, 101, 493 Hossain, 2006, High strength blended cement concrete incorporating volcanic ash: Performance at high temperatures, Cem Concr Compos, 28, 535, 10.1016/j.cemconcomp.2006.01.013 ASTM C1437 Standard Test Method for Flow of Hydraulic Cement Mortar. ASTM International, West Conshohocken, PA (2015). GB/T 50082-2009. Standard for Test Method of Long-Term Performance and Durability of Ordinary Concrete; China Standard Press: Beijing, China, 2009. ASTM C 597. Standard Test Method for Pulse Velocity through Concrete; American Society for Testing and Materials: West Conshohocken, PA, USA, 2016. Larsen, 2020, The influence of steel fibres on compressive and tensile strength of ultra-high-performance concrete: a review, Constr Build Mater, 256, 10.1016/j.conbuildmat.2020.119459 Pakravan, 2019, Synthetic fibers for cementitious composites: a critical and in-depth review of recent advances, Constr Build Mater, 207, 491, 10.1016/j.conbuildmat.2019.02.078 Gao, 2020, Durability of steel fibre-reinforced recycled coarse aggregate concrete, Constr Build Mater, 232, 10.1016/j.conbuildmat.2019.117119 Dong, 2021, Effect of freeze–thaw cycling on mechanical properties of polyethylene fiber and steel fiber reinforced concrete, Constr Build Mater, 295, 10.1016/j.conbuildmat.2021.123427 Alsaif, 2019, Freeze-thaw resistance of steel fibre reinforced rubberised concrete, Constr Build Mater, 195, 450, 10.1016/j.conbuildmat.2018.11.103 Niu, 2013, Study of the performance of steel fiber reinforced concrete to water and salt freezing condition, Mater Des, 44, 267, 10.1016/j.matdes.2012.07.074 Zhang, 2015, Low-velocity flexural impact response of steel fiber reinforced concrete subjected to freeze–thaw cycles in NaCl solution, Constr Build Mater, 101, 522, 10.1016/j.conbuildmat.2015.09.045 Ralegaonkar, 2018, Application of chopped basalt fibers in reinforced mortar: a review, Constr Build Mater, 164, 589, 10.1016/j.conbuildmat.2017.12.245 Pickel, 2018, Use of basalt fibers in fiber-reinforced concrete, ACI Mater J, 115 Mohammadhosseini, 2020, Waste metalized film food packaging as low cost and eco-friendly fibrous materials in the production of sustainable and green concrete composites, J Clean Prod, 258, 10.1016/j.jclepro.2020.120726 Mohammadhosseini, 2017, The impact resistance and mechanical properties of concrete reinforced with waste polypropylene carpet fibres, Constr Build Mater, 143, 147, 10.1016/j.conbuildmat.2017.03.109 Al-Masoodi, 2016, Static and dynamic properties of concrete with different types and shapes of fibrous reinforcement, Constr Build Mater, 104, 247, 10.1016/j.conbuildmat.2015.12.037 ACI 224R-01, Control of Cracking of Concrete Structures, ACI Committee 224, American Concrete Institute, Farmington Hills, MI, 2008. ACI 318-95, Building Code Requirements for Structural Concrete and Commentary (ACI 318R-95), American Concrete Institute. Farmington Hills, MI. 1995. Slate, F.O., and Hover, K.C., Fracture Mechanics of Concrete: Edited by F.H. Whitmann, Published by Elsevier Science Page 85-93, 1984. Şahmaran, 2007, Transport properties of Engineered Cementitious Composites under chloride exposure, ACI Mater J, 104, 604 Yang Y, Lepech MD, Li VC. Self-healing of ECC under cyclic wetting and drying, Proceedings of Int'l Workshop on Durability of Reinforced Concrete Under Combined Mechanical and Climatic Loads, Qingdao, China, 2005, pp. 231–242. Lepech M, Li VC. Water permeability of cracked cementitious composites, Proceedings of Eleventh International Conference on Fracture, Turin, Italy, 2005, pp. 20–25. Alahmad, 2008, Effect of crack opening on carbon dioxide penetration in cracked mortar samples, Mater Struct, 42, 559, 10.1617/s11527-008-9402-x Liu, 2021, Effect of the mechanical load on the carbonation of concrete: a review of the underlying mechanisms, test methods, and results, Materials, 14, 4407, 10.3390/ma14164407 Wang, 2019, Mechanical properties of high performance concrete reinforced with basalt fiber and polypropylene fiber, Constr Build Mater, 197, 464, 10.1016/j.conbuildmat.2018.11.181