Use of agriculture waste as short discrete fibers and glass-fiber-reinforced-polymer rebars in concrete walls for enhancing impact resistance

ACI 440.1R-06 Guide for the Design and Construction of Structural Concrete Reinforced with FRP Bars. ACI, 544.2R-89. Measurement of Properties of Fiber Reinforced Concrete. Affan, 2019, Compressive behavior of jute fiber reinforced concrete under freeze-thaw cycles Ahmed, 2013, Concrete bridge barriers reinforced with glass fiber-reinforced polymer: static tests and pendulum impacts, Can. J. Civ. Eng., 40, 1050, 10.1139/cjce-2013-0019 Ahmed, 2019, Impact resistance investigation of fiber reinforced concrete having GFRP rebars in last two decades 2015 2014 2015 2011 2016 Beshara, 2012, Nominal flexural strength of high strength fiber reinforced concrete beams, Arabian J. Sci. Eng., 37, 291, 10.1007/s13369-012-0172-y Campos, 2020, Low-cement high-strength concrete with partial replacement of Portland cement with stone powder and silica fume designed by particle packing optimization, J. Clean. Prod., 121228 Chandel, 2016, A comparative strength study of coir fibre reinforced concrete (CFRC) over plain cement concrete (PCC), J. Mech. Civil Eng. (IOSR-JMCE), 13, 95 Chin, 2020, Flexural behavior of a precast concrete deck connected with headed GFRP rebars and UHPC, Materials, 13, 604, 10.3390/ma13030604 Dittenber, 2012, Critical review of recent publications on use of natural composites in infrastructure, Compos. Appl. Sci. Manuf., 43, 1419, 10.1016/j.compositesa.2011.11.019 Ejaz, 2019, Development of empirical relation for moment capacity of a concrete prototype bridge deck slab reinforced with GFRP rebars and jute fibers El-Salakawy, 2004, Pendulum impacts into concrete bridge barriers reinforced with glass fiber reinforced polymer composite bars, Can. J. Civ. Eng., 31, 539, 10.1139/l04-006 Goldston, 2016, Experimental investigation of the behaviour of concrete beams reinforced with GFRP bars under static and impact loading, Eng. Struct., 113, 220, 10.1016/j.engstruct.2016.01.044 Hossain, 2020, Bond strength of fiber-reinforced polymer bars in engineered cementitious composites, Proc. Instit. Civil Eng.-Const. Mater., 173, 15 Hussain, 2019, Improving the impact resistance and dynamic properties of jute fiber reinforced concrete for rebars design by considering tension zone of FRC, Construct. Build. Mater., 213, 592, 10.1016/j.conbuildmat.2019.04.036 Islam, 2018, Influence of jute fiber on concrete properties, Construct. Build. Mater., 189, 768, 10.1016/j.conbuildmat.2018.09.048 Jin, 2018, Experimental and numerical study of reinforced concrete beams with steel fibers subjected to impact loading, Int. J. Damage Mech., 27, 1058, 10.1177/1056789517721616 Kim, 2013, Mechanical properties of natural fiber-reinforced normal strength and high-fluidity concretes, Comput. Concr., 11, 531, 10.12989/cac.2013.11.6.531 Lam, 2015, Mechanical properties of kenaf fiber reinforced concrete with different fiber content and fiber length, J. Asian Concr. Feder., 1, 11, 10.18702/acf.2015.09.1.11 Li, 2020, Influence of key design parameters of ultra-high-performance fiber reinforced concrete on in-service bullet resistance, Int. J. Impact Eng., 136, 10.1016/j.ijimpeng.2019.103434 Li, 2012, Utilization of municipal solid waste incineration bottom ash in blended cement, J. Clean. Prod., 32, 96, 10.1016/j.jclepro.2012.03.038 Liu, 2018, Static and impact behaviour of recycled aggregate concrete under daily temperature variations, J. Clean. Prod., 191, 283, 10.1016/j.jclepro.2018.04.237 Liu, 2018, Experimental and numerical studies of ultra-high-performance concrete targets against high-velocity projectile impacts, Eng. Struct., 173, 166, 10.1016/j.engstruct.2018.06.098 Mastali, 2016, The impact resistance and mechanical properties of reinforced self-compacting concrete with recycled glass fiber reinforced polymers, J. Clean. Prod., 124, 312, 10.1016/j.jclepro.2016.02.148 Merli, 2020, Recycled fibers in reinforced concrete: a systematic literature review, J. Clean. Prod., 248, 10.1016/j.jclepro.2019.119207 Mo, 2020, Mechanical properties and damping capacity of polypropylene fiber reinforced concrete modified by rubber powder, Construct. Build. Mater., 242, 10.1016/j.conbuildmat.2020.118111 Mo, 2016, Green concrete partially comprised of farming waste residues: a review, J. Clean. Prod., 117, 122, 10.1016/j.jclepro.2016.01.022 Mwaikambo, 2002, Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization, J. Appl. Polym. Sci., 84, 2222, 10.1002/app.10460 Pham, 2016, Prediction of the impact force on reinforced concrete beams from a drop weight, Adv. Struct. Eng., 19, 1710, 10.1177/1369433216649384 Ramakrishna, 2005, Impact strength of a few natural fiber reinforced cement mortar slabs: a comparative study, Cement Concr. Compos., 27, 547, 10.1016/j.cemconcomp.2004.09.006 Sadraie, 2019, Dynamic performance of concrete slabs reinforced with steel and GFRP bars under impact loading, Eng. Struct., 191, 62, 10.1016/j.engstruct.2019.04.038 Sanjay, 2018, Characterization and properties of natural fiber polymer composites: a comprehensive review, J. Clean. Prod., 172, 566, 10.1016/j.jclepro.2017.10.101 Sarasini, 2018, A systematic literature review on less common natural fibers and their biocomposites, J. Clean. Prod., 195, 240, 10.1016/j.jclepro.2018.05.197 Seica, 2019, Blast and impact loading effects on glass and steel elements and materials, Thin-Walled Struct., 134, 384, 10.1016/j.tws.2018.07.048 Smith, 2010, Blast walls for structural protection against high explosive threats: a review, Int. J. Protect. Struct., 1, 67, 10.1260/2041-4196.1.1.67 Sultana, 2020, An experimental investigation and modeling approach of response surface methodology coupled with crow search algorithm for optimizing the properties of jute fiber reinforced concrete, Construct. Build. Mater., 243, 10.1016/j.conbuildmat.2020.118216 Vicente, 2019, Computed tomography scanning of the internal microstructure, crack mechanisms, and structural behavior of fiber-reinforced concrete under static and cyclic bending tests, Int. J. Fatig., 121, 9, 10.1016/j.ijfatigue.2018.11.023 Wang, 2019, Effect of jute fiber modification on mechanical properties of jute fiber composite, Materials, 12, 1226, 10.3390/ma12081226 Wang, 2018, Flexural behaviour of FFRP wrapped CFRC beams under static and impact loadings, Int. J. Impact Eng., 111, 46, 10.1016/j.ijimpeng.2017.08.010 Wu, 2019, Debris characteristics and scattering pattern analysis of reinforced concrete slabs subjected to internal blast loads–a numerical study, Int. J. Impact Eng., 131, 1, 10.1016/j.ijimpeng.2019.04.024 Zakaria, 2018, A comparative study of the mechanical properties of jute fiber and yarn reinforced concrete composites, J. Nat. Fibers, 1 Zhang, 2019, Mechanical Properties of Jute Fiber-reinforced High-strength Concrete, Struct. Concr., vol. 1, 10 Zineddin, 2007, Dynamic response and behavior of reinforced concrete slabs under impact loading, Int. J. Impact Eng., 34, 1517, 10.1016/j.ijimpeng.2006.10.012