Liquid cooling with phase change materials for cylindrical Li-ion batteries: An experimental and numerical study

International Energy Agency (IEA), 2017, 10.1787/9789264278882-en Rao, 2011, A review of power battery thermal energy management, Renew Sustain Energy Rev, 15, 4554, 10.1016/j.rser.2011.07.096 A PA, 2002, Battery thermal models for hybrid vehicle simulations, J Power Sources, 110, 377, 10.1016/S0378-7753(02)00200-8 Feng, 2014, Thermal runaway features of large format prismatic lithium ion battery using extended volume accelerating rate calorimetry, J Power Sources, 255, 294, 10.1016/j.jpowsour.2014.01.005 Feng, 2015, Characterization of penetration induced thermal runaway propagation process within a large format lithium ion battery module, J Power Sources, 275, 261, 10.1016/j.jpowsour.2014.11.017 E J, 2018, Orthogonal experimental design of liquid-cooling structure on the cooling effect of a liquid-cooled battery thermal management system, Appl Therm Eng, 132, 508, 10.1016/j.applthermaleng.2017.12.115 Bai, 2019, Investigation of thermal management for lithium-ion pouch battery module based on phase change slurry and mini channel cooling plate, Energy, 167, 561, 10.1016/j.energy.2018.10.137 Hussain, 2016, Experimental investigation of a passive thermal management system for high-powered lithium ion batteries using nickel foam-paraffin composite, Energy, 115, 209, 10.1016/j.energy.2016.09.008 Samimi, 2016, Thermal management analysis of a Li-ion battery cell using phase change material loaded with carbon fibers, Energy, 96, 355, 10.1016/j.energy.2015.12.064 Wang, 2018, Performance analysis of a novel thermal management system with composite phase change material for a lithium-ion battery pack, Energy, 156, 154, 10.1016/j.energy.2018.05.104 Wu, 2016, An experimental study of thermal management system using copper mesh-enhanced composite phase change materials for power battery pack, Energy, 113, 909, 10.1016/j.energy.2016.07.119 Park, 2013, Battery cell arrangement and heat transfer fluid effects on the parasitic power consumption and the cell temperature distribution in a hybrid electric vehicle, J Power Sources, 227, 191, 10.1016/j.jpowsour.2012.11.039 Zhao, 2015, Thermal performance of mini-channel liquid cooled cylinder based battery thermal management for cylindrical lithium-ion power battery, Energy Convers Manag, 103, 157, 10.1016/j.enconman.2015.06.056 Dheep, 2018, Investigation on thermal reliability and corrosion characteristics of glutaric acid as an organic phase change material for solar thermal energy storage applications, Appl Therm Eng, 129, 1189, 10.1016/j.applthermaleng.2017.10.133 Ling, 2014, Review on thermal management systems using phase change materials for electronic components, Li-ion batteries and photovoltaic modules, Renew Sustain Energy Rev, 31, 427, 10.1016/j.rser.2013.12.017 Zhang, 2006, Study on paraffin/expanded graphite composite phase change thermal energy storage material, Energy Convers Manag, 47, 303, 10.1016/j.enconman.2005.03.004 Ling, 2015, A hybrid thermal management system for lithium ion batteries combining phase change materials with forced-air cooling, Appl Energy, 148, 403, 10.1016/j.apenergy.2015.03.080 Kizilel, 2008, Passive control of temperature excursion and uniformity in high-energy Li-ion battery packs at high current and ambient temperature, J Power Sources, 183, 370, 10.1016/j.jpowsour.2008.04.050 Rao, 2016, Investigation of the thermal performance of phase change material/mini-channel coupled battery thermal management system, Appl Energy, 164, 659, 10.1016/j.apenergy.2015.12.021 Bai, 2017, Thermal management performances of PCM/water cooling-plate using for lithium-ion battery module based on non-uniform internal heat source, Appl Therm Eng, 126, 17, 10.1016/j.applthermaleng.2017.07.141 Ling, 2018, Compact liquid cooling strategy with phase change materials for Li-ion batteries optimized using response surface methodology, Appl Energy, 228, 777, 10.1016/j.apenergy.2018.06.143 Ling, 2018, Thermal management performance of phase change materials with different thermal conductivities for Li-ion battery packs operated at low temperatures, Energy, 144, 977, 10.1016/j.energy.2017.12.098 Lv, 2016, Experimental study on a novel battery thermal management technology based on low density polyethylene-enhanced composite phase change materials coupled with low fins, Appl Energy, 178, 376, 10.1016/j.apenergy.2016.06.058 Huang, 2006, Thermal study on single electrodes in lithium-ion battery, J Power Sources, 156, 541, 10.1016/j.jpowsour.2005.05.083 Bohn, 2015, Performance and the characteristics of thermally stressed anodes in lithium ion cells, J Electrochem Soc, 162, A3110, 10.1149/2.0171502jes Li, 2018, Water cooling based strategy for lithium ion battery pack dynamic cycling for thermal management system, Appl Therm Eng, 132, 575, 10.1016/j.applthermaleng.2017.12.131 Saw, 2018, Novel thermal management system using mist cooling for lithium-ion battery packs, Appl Energy, 223, 146, 10.1016/j.apenergy.2018.04.042 Onda, 2006, Thermal behavior of small lithium-ion battery during rapid charge and discharge cycles, J Power Sources, 158, 535, 10.1016/j.jpowsour.2005.08.049 Ling, 2014, Experimental and numerical investigation of the application of phase change materials in a simulative power batteries thermal management system, Appl Energy, 121, 104, 10.1016/j.apenergy.2014.01.075 Ling, 2015, Thermal conductivity of an organic phase change material/expanded graphite composite across the phase change temperature range and a novel thermal conductivity model, Energy Convers Manag, 102, 202, 10.1016/j.enconman.2014.11.040