Drop impacts onto cold and heated rigid surfaces: Morphological comparisons, disintegration limits and secondary atomization

Akao, 1980, Deformation behaviour of a liquid droplet impinging onto a hot metal surface, Trans. ISIJ, 20, 737, 10.2355/isijinternational1966.20.737 Akhtar, S.W., Yule, A.J., 2001. Droplet impaction on a heated surface at high Weber numbers. ILASS-Europe 2001, Zurich. Araki, 1982, Deformation behaviour of a liquid droplet impinging on a hot metal surface, Iclass, 1982, 389 Arcoumanis, C., Cutter, P.A., 1995. Flow and heat transfer characteristics of impinging Diesel sprays under cross-flow conditions. SAE Paper 950448. Arcoumanis, 1997, Gasoline injection against surfaces and films, Atomizat. Sprays, 7, 437, 10.1615/AtomizSpr.v7.i4.70 Bartolo, 2006, Singular jets and bubbles in drop impact, Phys. Rev. Lett., 96, 124501, 10.1103/PhysRevLett.96.124501 Bernardin, 1996, Experimental and statistical investigation of change in surface roughness associated with spray quenching, Int. J. Heat Mass Transfer, 39, 2023, 10.1016/0017-9310(95)00304-5 Bernardin, 1997, Effects of surface roughness on water droplet impact history and heat transfer regimes, Int. J. Heat Mass Transfer, 40, 73, 10.1016/S0017-9310(96)00067-1 Bico, 1999, Pearl drops, Europhys. Lett., 47, 220, 10.1209/epl/i1999-00548-y Blake, T.D., 1993. Dynamic contact angles and wetting kinetics. In: Berg. J.C. (Ed.), Wettability, p. 251. Bussman, 2000, Modeling the splash of a droplet impacting a solid surface, Phys. Fluids, 12, 3121, 10.1063/1.1321258 Cassie, 1944, Wettability of porous surfaces, Trans. Faraday Soc., 40, 546, 10.1039/tf9444000546 Chandra, 1991, On the collision of a droplet with a solid surface, Proc. R. Soc. London, Ser. A, 432, 13, 10.1098/rspa.1991.0002 Chaves, 1999, Dynamic processes occurring during the spreading of thin liquid films produced by drop impact on hot walls, Int. J. Heat Fluid Flow, 20, 470, 10.1016/S0142-727X(99)00034-X Cossali, G.E., Marengo, M., Santini, M., Watanabe, J., 2002. Secondary droplet atomization from single drop impact on heated surfaces. In: Proceedings of 18th ILASS-Europe2002, Zaragoza, pp. 111–116. Cossali, 2004, The role of time in single droplet splash on thin film, Exp. Fluids, 36, 888, 10.1007/s00348-003-0772-0 Cossali, 2005, Secondary atomization produced by single drop vertical impact onto heated surfaces, Exp. Therm. Fluid Sci., 29, 937, 10.1016/j.expthermflusci.2004.12.003 Cossali, G.E., Marengo, M., Santini, M., 2005b. Effects of wall effusivity on secondary droplet atomization from single and multiple impact onto heated surfaces. In: Proceedings of 19th ILASS-Europe 2005, Orléans, France. Extrand, 2002, Model for contact angles and hysteresis on rough and ultraphobic surfaces, Langmuir, 18, 7991, 10.1021/la025769z Extrand, 2004, Criteria for ultralyphobic surfaces, Langmuir, 20, 5013, 10.1021/la036481s Fan, 2000, Spray and combustion modelling in gasoline direct-injection engines, Atomizat. Sprays, 10, 219, 10.1615/AtomizSpr.v10.i3-5.30 Fedorchenko, 2004, On some common features of drop impact on liquid surfaces, Phys. Fluids, 16, 1349, 10.1063/1.1652061 He, 2003, Multiple equilibrium droplet shapes and design criterions for rough hydrophobic surfaces, Langmuir, 19, 4999, 10.1021/la0268348 Kandlikar, 2001, Contact angles of droplets during spread and recoil after impinging on a heated surface, J. Ch. Eng. Res. Des., 79, 491, 10.1205/026387601750282436 Karl, 2000, Experimental investigation of interaction processes between droplets and hot walls, Phys. Fluids, 12, 785, 10.1063/1.870335 Karl, 1996, Deformation of liquid droplets during collisions with hot walls: experimental and numerical results, Part. Syst. Charact., 13, 186, 10.1002/ppsc.19960130304 Kuhnke, D., 2004. Spray Wall Interaction Modeling by Dimensionless Data Analysis. Ph.D. Thesis, accepted by Fachbereich Mathematik, Technischen Universitat Darmstadt. Manzello, 2002, An experimental study of high Weber number impact of methoxy-nonafluorobutane C4F9OCH3 (HFE-7100) and n-heptane droplets on a heated solid surface, Int. J. Heat Mass Transfer, 45, 3961, 10.1016/S0017-9310(02)00103-5 Marmur, 2003, Wetting on hydrophobic rough surfaces: to be heterogeneous or not to be, Langmuir, 19, 8343, 10.1021/la0344682 Matsui, Y., Sugihara, K., 1988. Sources of hydrocarbon emissions from a small direct injection Diesel engine. JSAE Review 7. Moita, 2002, The deformation of single droplets impacting onto a flat surface, SAE 2002 Trans. – J. Fuels Lubrificants, USA, 1477 Moita, 2002, The dynamic behaviour of single droplets impacting onto a flat surface, ILASS-Europe 2002, 157 Mundo, 1995, Droplet–wall collisions: experimental studies of the deformation and break-up processes, Int. J. Multiphase Flow, 21, 151, 10.1016/0301-9322(94)00069-V Naber, J.D., Farrel, P., 1993. Hydrodynamics of droplet impingement on a heated surface. SAE Paper 930919. Norris-Jones, S.R., Hollis, T., Waterhouse, C.N.F., 1984. A study of the formation of particulates in the cylinder of a direct injection Diesel engine. SAE Paper 840419. Pasandideh-Fard, 1996, Capillary effects during droplet impact on a solid surface, Phys. Fluids, 8, 650, 10.1063/1.868850 Patankar, 2003, On the modeling of hydrophobic contact angles on rough surfaces, Langmuir, 19, 1249, 10.1021/la026612+ Pitcher, G., Winklhofer, E., 1998. Droplet size and velocity measurements in the spray of a Direct Injection Gasoline injector. ICLASS-Europe’98. Quéré, 2003, Slippy and sticky microtextured solids, Nanotechnology, 14, 1109, 10.1088/0957-4484/14/10/307 Range, 1998, Influence of surface roughness on liquid drop impact, J. Col. Int. Sci., 203, 16, 10.1006/jcis.1998.5518 Rioboo, 2000, Outcome from a drop impact on solid surfaces, Atomizat. Sprays J., 4 Rioboo, 2002, Time evolution of liquid drop impact onto solid, dry surfaces, Exp. Fluids, 33, 112, 10.1007/s00348-002-0431-x Roisman, 2002, Time evolution of liquid drop impact onto a wetted wall: description of crown formation and propagation, J. Fluid Mech., 472, 373, 10.1017/S0022112002002434 Stow, 1981, An experimental investigation of fluid flow resulting from the impact of a water drop with an unyielding dry surface, Proc. R. Soc. London, Ser. A, 373, 419, 10.1098/rspa.1981.0002 Thoroddsen, 1998, Evolution of the fingering pattern of an impacting drop, Phys. Fluids, 10, 1359, 10.1063/1.869661 Tomoda, T, Kubota, M, Shimizu, R., Nomura, Y., 2001. Numerical analysis of mixture formation of a direct injection gasoline engine. In: The Fifth International Symposium on Diagnostics and Modeling of Combustion in Internal Combustion Engines, Comodia 2001, Nagoya. Vignes-Adler, 2002, Physico-chemical aspects of forced wetting, 103 Wachers, 1966, The heat transfer from horizontal plate to sessile water drops in the spheroidal state, Chem. Eng. Sci., 21, 923, 10.1016/0009-2509(66)85086-8 Wenzel, 1936, Resistance of solid surfaces to wetting by water, Ind. Eng. Chem., 28, 988, 10.1021/ie50320a024 Wu, Z., 1992. Modélisation et calcul implicite multidomaine d’écoulements diphasiques gas-gouttelettes. Ph.D. Thesis, Université Pierre et Marie Curie, Paris, France. Xu, 2005, Drop splashing onto a dry smooth surface, Phys. Rev. Lett., 94, 184505, 10.1103/PhysRevLett.94.184505 Yarin, 2006, Drop Impact Dynamics: Splashing, Spreading, Receding, Bouncing …, Annu. Rev. Fluid. Mech., 38, 159, 10.1146/annurev.fluid.38.050304.092144 Yarin, 1995, Impact of drops on solid surfaces: self-similar capillary waves and splashing as a new type of kinematic discontinuity, J. Fluid Mech., 283, 141, 10.1017/S0022112095002266 Yoshikawa, S., Furusawa, R., Ariai, M., Hiroyasu, H., 1989. Optimizing spray behavior to improve engine performance and to reduce exhaust emissions in a small D.I. Diesel engine. SAE Paper 890463.