A comprehensive review on the environmental impacts of diesel/biodiesel additives
Tóm tắt
Từ khóa
Tài liệu tham khảo
Aghbashlo, 2019, Multi-objective exergetic and technical optimization of a piezoelectric ultrasonic reactor applied to synthesize biodiesel from waste cooking oil (WCO) using soft computing techniques, Fuel, 235, 100, 10.1016/j.fuel.2018.07.095
Singh, 2015, Transient performance and emission characteristics of a heavy-duty diesel engine fuelled with microalga Chlorella variabilis and Jatropha curcas biodiesels, Energy Convers Manage, 106, 892, 10.1016/j.enconman.2015.10.023
Imdadul, 2017, Quality improvement of biodiesel blends using different promising fuel additives to reduce fuel consumption and NO emission from CI engine, Energy Convers Manage, 138, 327, 10.1016/j.enconman.2017.01.077
Naylor, 2017, The rise in global biodiesel production: Implications for food security, Glob Food Sec
Aghbashlo, 2018, Exergy-based optimization of a continuous reactor applied to produce value-added chemicals from glycerol through esterification with acetic acid, Energy, 150, 351, 10.1016/j.energy.2018.02.151
Van Gerpen, 2005, Biodiesel processing and production, Fuel Process Technol, 86, 1097, 10.1016/j.fuproc.2004.11.005
Hosseinpour, 2018, Biomass higher heating value (HHV) modeling on the basis of proximate analysis using iterative network-based fuzzy partial least squares coupled with principle component analysis (PCA-INFPLS), Fuel, 222, 1, 10.1016/j.fuel.2018.02.126
Aghbashlo, 2016, The use of ELM-WT (extreme learning machine with wavelet transform algorithm) to predict exergetic performance of a DI diesel engine running on diesel/biodiesel blends containing polymer waste, Energy, 94, 443, 10.1016/j.energy.2015.11.008
Demirbas, 2007, Importance of biodiesel as transportation fuel, Energy Policy, 35, 4661, 10.1016/j.enpol.2007.04.003
Aghbashlo, 2018, On the exergoeconomic and exergoenvironmental evaluation and optimization of biodiesel synthesis from waste cooking oil (WCO) using a low power, high frequency ultrasonic reactor, Energy Convers Manage, 164, 385, 10.1016/j.enconman.2018.02.086
Rajaeifar, 2016, Environmental impact assessment of olive pomace oil biodiesel production and consumption: a comparative lifecycle assessment, Energy, 106, 87, 10.1016/j.energy.2016.03.010
Yusuf, 2011, Overview on the current trends in biodiesel production, Energy Convers Manage, 52, 2741, 10.1016/j.enconman.2010.12.004
Lohan, 2013, Sustainability of biodiesel production as vehicular fuel in Indian perspective, Renew Sustain Energy Rev, 25, 251, 10.1016/j.rser.2013.04.024
Aghbashlo, 2015, Improving exergetic and sustainability parameters of a DI diesel engine using polymer waste dissolved in biodiesel as a novel diesel additive, Energy Convers Manage, 105, 328, 10.1016/j.enconman.2015.07.075
Tang, 2008, Quality survey of biodiesel blends sold at retail stations, Fuel, 87, 2951, 10.1016/j.fuel.2008.04.029
McCormick RL. Empirical study of the stability of biodiesel and biodiesel blends: Milestone Report. DIANE Publishing; 2009.
Qi, 2009, Combustion and performance evaluation of a diesel engine fueled with biodiesel produced from soybean crude oil, Renew Energy, 34, 2706, 10.1016/j.renene.2009.05.004
Yilmaz, 2011, Effects of preheating vegetable oils on performance and emission characteristics of two diesel engines, Biomass Bioenergy, 35, 2028, 10.1016/j.biombioe.2011.01.052
Atmanlı, 2013, Experimental investigation of the effect of diesel-cotton oil-n-butanol ternary blends on phase stability, engine performance and exhaust emission parameters in a diesel engine, Fuel, 109, 503, 10.1016/j.fuel.2013.03.012
Bhaskar, 2015, Experimental analysis of emission characteristics of direct injection CI engine using FOME and its diesel blends as bio-fuel, Int J Curr Eng Technol, 5, 1718
Shahid, 2016, Performance evaluation of a diesel engine using biodiesel, Pakistan J Eng Appl Sci
Miri, 2017, Effects of biodiesel fuel synthesized from non-edible rapeseed oil on performance and emission variables of diesel engines, J Clean Prod, 142, 3798, 10.1016/j.jclepro.2016.10.082
Mofijur M, Rasul MG, Hassan NMS. Effect of butanol additive on the performance and emission of Australian macadamia biodiesel fuel in a diesel engine. Sustain. Renew. Energy Eng. (ICSREE), 2017 2nd Int. Conf., IEEE; 2017. p. 33–7.
Bär, 2018, Synthesis, characterization and antioxidant properties of 2, 4, 6-tris-isopropylbenzoic acid hydrazide in biodiesel, Fuel, 215, 249, 10.1016/j.fuel.2017.10.096
Mohammadi P, Nikbakht AM, Tabatabaei M, Farhadi K. A novel diesel fuel additive to improve fuel properties and to reduce emissions; 2012.
Mohammadi, 2014, Improvement of the cold flow characteristics of biodiesel containing dissolved polymer wastes using acetone, Biofuel Res J, 1, 26, 10.18331/BRJ2015.1.1.6
Khalife, 2017, Impacts of additives on performance and emission characteristics of diesel engines during steady state operation, Prog Energy Combust Sci, 59, 32, 10.1016/j.pecs.2016.10.001
Jiaqiang, 2017, Effect of different technologies on combustion and emissions of the diesel engine fueled with biodiesel: A review, Renew Sustain Energy Rev, 80, 620, 10.1016/j.rser.2017.05.250
Senthil, 2015, Environmental effect of antioxidant additives on exhaust emission reduction in compression ignition engine fuelled with Annona methyl ester, Environ Technol, 36, 2079, 10.1080/09593330.2015.1021856
Swaminathan, 2012, Performance and exhaust emission characteristics of a CI engine fueled with biodiesel (fish oil) with DEE as additive, Biomass Bioenergy, 39, 168, 10.1016/j.biombioe.2012.01.001
Rashedul, 2014, The effect of additives on properties, performance and emission of biodiesel fuelled compression ignition engine, Energy Convers Manage, 88, 348, 10.1016/j.enconman.2014.08.034
Kannan, 2011, Effect of metal based additive on performance emission and combustion characteristics of diesel engine fuelled with biodiesel, Appl Energy, 88, 3694, 10.1016/j.apenergy.2011.04.043
Keskin, 2007, Biodiesel production from tall oil with synthesized Mn and Ni based additives: effects of the additives on fuel consumption and emissions, Fuel, 86, 1139, 10.1016/j.fuel.2006.10.021
Zhao, 2014, Unregulated emissions from diesel engine with particulate filter using Fe-based fuel borne catalyst, J Environ Sci, 26, 2027, 10.1016/j.jes.2014.08.004
Keskin, 2015, Using Pd (II) and Ni (II) complexes with N, N-dimethyl-N -2-chlorobenzoylthiourea ligand as fuel additives in diesel engine, Fuel, 162, 202, 10.1016/j.fuel.2015.09.023
Aghbashlo, 2017, A novel emulsion fuel containing aqueous nano cerium oxide additive in diesel-biodiesel blends to improve diesel engines performance and reduce exhaust emissions: Part II-Exergetic analysis, Fuel, 205, 262, 10.1016/j.fuel.2017.05.003
Venkatesan, 2017, A comprehensive review on the effect of nano metallic additives on fuel properties, engine performance and emission characteristics, Int J Renew Energy Res, 7, 825
Fazal, 2018, Influence of copper on the instability and corrosiveness of palm biodiesel and its blends: An assessment on biodiesel sustainability, J Clean Prod, 171, 1407, 10.1016/j.jclepro.2017.10.144
Aghbashlo, 2018, Exergoeconomic analysis of a DI diesel engine fueled with diesel/biodiesel (B5) emulsions containing aqueous nano cerium oxide, Energy, 149, 967, 10.1016/j.energy.2018.02.082
Khalife, 2017, A novel emulsion fuel containing aqueous nano cerium oxide additive in diesel-biodiesel blends to improve diesel engines performance and reduce exhaust emissions: Part I-Experimental analysis, Fuel, 207, 741, 10.1016/j.fuel.2017.06.033
Aghbashlo, 2016, Effect of an emission-reducing soluble hybrid nanocatalyst in diesel/biodiesel blends on exergetic performance of a DI diesel engine, Renew Energy, 93, 353, 10.1016/j.renene.2016.02.077
Yang, 1998, Inhibitory effect of the Al2O3-SiO2 mixed additives on the anatase-rutile phase transformation, Mater Lett, 36, 320, 10.1016/S0167-577X(98)00042-1
Frusteri, 2009, Catalytic etherification of glycerol by tert-butyl alcohol to produce oxygenated additives for diesel fuel, Appl Catal A Gen, 367, 77, 10.1016/j.apcata.2009.07.037
Lapuerta, 2010, Stability, lubricity, viscosity, and cold-flow properties of alcohol- diesel blends, Energy Fuels, 24, 4497, 10.1021/ef100498u
Ribeiro, 2007, The role of additives for diesel and diesel blended (ethanol or biodiesel) fuels: a review, Energy Fuels, 21, 2433, 10.1021/ef070060r
Liu, 2018, Laser diagnostics and chemical kinetic analysis of PAHs and soot in co-flow partially premixed flames using diesel surrogate and oxygenated additives of n-butanol and DMF, Combust Flame, 188, 129, 10.1016/j.combustflame.2017.09.025
Li, 2018, Experimental evaluation of water-containing isopropanol-n-butanol-ethanol and gasoline blend as a fuel candidate in spark-ignition engine, Appl Energy, 219, 42, 10.1016/j.apenergy.2018.03.051
Li, 2018, Experimental comparison of acetone-n-butanol-ethanol (ABE) and isopropanol-n-butanol-ethanol (IBE) as fuel candidate in spark-ignition engine, Appl Therm Eng, 133, 179, 10.1016/j.applthermaleng.2017.12.132
Li, 2016, Effect of water-containing acetone-butanol-ethanol gasoline blends on combustion, performance, and emissions characteristics of a spark-ignition engine, Energy Convers Manage, 117, 21, 10.1016/j.enconman.2016.02.083
Li, 2016, Combustion, performance and emissions characteristics of a spark-ignition engine fueled with isopropanol-n-butanol-ethanol and gasoline blends, Fuel, 184, 864, 10.1016/j.fuel.2016.07.063
Li, 2017, Experimental investigation of a spark ignition engine fueled with acetone-butanol-ethanol and gasoline blends, Energy, 121, 43, 10.1016/j.energy.2016.12.111
Schober, 2004, The impact of antioxidants on biodiesel oxidation stability, Eur J Lipid Sci Technol, 106, 382, 10.1002/ejlt.200400954
Karavalakis, 2011, Storage stability and ageing effect of biodiesel blends treated with different antioxidants, Energy, 36, 369, 10.1016/j.energy.2010.10.029
Ramalingam, 2016, Improving the performance is better and emission reductions from Annona biodiesel operated diesel engine using 1, 4-dioxane fuel additive, Fuel, 185, 804, 10.1016/j.fuel.2016.08.049
Hajjari, 2014, Experimental investigation of the effect of cerium oxide nanoparticles as a combustion-improving additive on biodiesel oxidative stability: mechanism, RSC Adv, 4, 14352, 10.1039/c3ra47033d
Varatharajan, 2011, Mitigation of NOx emissions from a jatropha biodiesel fuelled DI diesel engine using antioxidant additives, Fuel, 90, 2721, 10.1016/j.fuel.2011.03.047
Ileri, 2014, Experimental investigation of the effect of antioxidant additives on NOx emissions of a diesel engine using biodiesel, Fuel, 125, 44, 10.1016/j.fuel.2014.02.007
Palash, 2014, Impacts of NOx reducing antioxidant additive on performance and emissions of a multi-cylinder diesel engine fueled with Jatropha biodiesel blends, Energy Convers Manage, 77, 577, 10.1016/j.enconman.2013.10.016
Nanthagopal, 2016, Influence of fuel injection pressures on Calophyllum inophyllum methyl ester fuelled direct injection diesel engine, Energy Convers Manage, 116, 165, 10.1016/j.enconman.2016.03.002
García, 2017, Antioxidants for biodiesel: Additives prepared from extracted fractions of bio-oil, Fuel Process Technol, 156, 407, 10.1016/j.fuproc.2016.10.001
Ryu, 2010, The characteristics of performance and exhaust emissions of a diesel engine using a biodiesel with antioxidants, Bioresour Technol, 101, S78, 10.1016/j.biortech.2009.05.034
Focke, 2012, The effect of synthetic antioxidants on the oxidative stability of biodiesel, Fuel, 94, 227, 10.1016/j.fuel.2011.11.061
Obadiah, 2012, Studies on the effect of antioxidants on the long-term storage and oxidation stability of Pongamia pinnata (L.) Pierre biodiesel, Fuel Process Technol, 99, 56, 10.1016/j.fuproc.2012.01.032
Fattah, 2014, Effect of antioxidant on the performance and emission characteristics of a diesel engine fueled with palm biodiesel blends, Energy Convers Manage, 79, 265, 10.1016/j.enconman.2013.12.024
Chandran, 2017, Deterioration of palm biodiesel fuel under common rail diesel engine operation, Energy, 120, 854, 10.1016/j.energy.2016.11.136
Fan, 2018, Three-dimensional graphite paper based imprinted electrochemical sensor for tertiary butylhydroquinone selective recognition and sensitive detection, Sens Actuators B Chem, 256, 520, 10.1016/j.snb.2017.10.085
Vieitez, 2018, Antioxidant and antibacterial activity of different extracts from herbs obtained by maceration or supercritical technology, J Supercrit Fluids, 133, 58, 10.1016/j.supflu.2017.09.025
Rawat, 2018, Algal biodiesel stabilization with lower concentration of 1: 3 ratios of binary antioxidants-Key factors to achieve the best synergy for maximum stabilization, Fuel, 214, 471, 10.1016/j.fuel.2017.11.056
Singh AP, Dhar A, Agarwal AK. Evolving energy scenario: role and scope for alternative fuels in transport sector. Prospect. Altern. Transp. Fuels, Springer; 2018. p. 7–19.
Tinprabath, 2015, Influence of biodiesel and diesel fuel blends on the injection rate under cold conditions, Fuel, 144, 80, 10.1016/j.fuel.2014.12.010
Islam, 2016, Improvement of cold flow properties of Cocos nucifera and Calophyllum inophyllum biodiesel blends using polymethyl acrylate additive, J Clean Prod, 137, 322, 10.1016/j.jclepro.2016.07.080
Sierra-Cantor, 2017, Methods for improving the cold flow properties of biodiesel with high saturated fatty acids content: A review, Renew Sustain Energy Rev, 72, 774, 10.1016/j.rser.2017.01.077
Cao, 2014, Ethylene vinyl acetate copolymer: A bio-based cold flow improver for waste cooking oil derived biodiesel blends, Appl Energy, 132, 163, 10.1016/j.apenergy.2014.06.085
Wang, 2014, Effect of polymeric cold flow improvers on flow properties of biodiesel from waste cooking oil, Fuel, 117, 876, 10.1016/j.fuel.2013.10.006
Verma, 2016, Evaluation and enhancement of cold flow properties of palm oil and its biodiesel, Energy Rep, 2, 8, 10.1016/j.egyr.2015.12.001
Monirul, 2017, Influence of poly (methyl acrylate) additive on cold flow properties of coconut biodiesel blends and exhaust gas emissions, Renew Energy, 101, 702, 10.1016/j.renene.2016.09.020
Freire, 2012, Evaluation of the oxidative stability and flow properties of quaternary mixtures of vegetable oils for biodiesel production, Fuel, 95, 126, 10.1016/j.fuel.2011.11.014
Misra, 2011, Blending of additives with biodiesels to improve the cold flow properties, combustion and emission performance in a compression ignition engine-A review, Renew Sustain Energy Rev, 15, 2413, 10.1016/j.rser.2011.02.023
Ramalho, 2012, Low temperature behavior of poultry fat biodiesel: diesel blends, Fuel, 93, 601, 10.1016/j.fuel.2011.10.051
Zuleta, 2012, Oxidative stability and cold flow behavior of palm, sacha-inchi, jatropha and castor oil biodiesel blends, Fuel Process Technol, 102, 96, 10.1016/j.fuproc.2012.04.018
Moser, 2014, Impact of fatty ester composition on low temperature properties of biodiesel-petroleum diesel blends, Fuel, 115, 500, 10.1016/j.fuel.2013.07.075
Anastopoulos, 2001, Lubrication properties of low-sulfur diesel fuels in the presence of specific types of fatty acid derivatives, Energy Fuels, 15, 106, 10.1021/ef990232n
Nassar, 2017, Preparation and evaluation of the mixtures of sulfonate and phenate as lube oil additives, Int J Ind Chem, 8, 383, 10.1007/s40090-017-0128-x
Malec, 1980, Lubricant Composition
Perilstein WL. Inventor; Ethyl Corp, assignee. Diesel fuel compositions having anti-wear properties, United States patent US 4,185,594; 1980.
Rezende, 2005, Characterization of lubricity improver additive in diesel by gas chromatography-mass spectrometry, J Chromatogr A, 1063, 211, 10.1016/j.chroma.2004.12.015
Encinar, 2002, Biodiesel fuels from vegetable oils: transesterification of Cynara c ardunculus L. oils with ethanol, Energy Fuels, 16, 443, 10.1021/ef010174h
Lü, 2005, Improving the combustion and emissions of direct injection compression ignition engines using oxygenated fuel additives combined with a cetane number improver, Energy Fuels, 19, 1879, 10.1021/ef0500179
Hosseinpour, 2016, Exact estimation of biodiesel cetane number (CN) from its fatty acid methyl esters (FAMEs) profile using partial least square (PLS) adapted by artificial neural network (ANN), Energy Convers Manage, 124, 389, 10.1016/j.enconman.2016.07.027
Datta, 2017, Engine performance, combustion and emission characteristics of a compression ignition engine operating on different biodiesel-alcohol blends, Energy, 125, 470, 10.1016/j.energy.2017.02.110
Kumar, 2017, The impacts on combustion, performance and emissions of biodiesel by using additives in direct injection diesel engine, Alexandria Eng J
Prasad, 2010, A review on diesel soot emission, its effect and control, Bull Chem React Eng Catal, 5, 69, 10.9767/bcrec.5.2.794.69-86
Re ito lu brahim, 2015, The pollutant emissions from diesel-engine vehicles and exhaust aftertreatment systems, Clean Technol Environ Policy, 17, 15, 10.1007/s10098-014-0793-9
Kumar, 2006, Benzene and toluene profiles in ambient air of Delhi as determined by active sampling and GC analysis, J Sci Indust Res, 65, 252
Garg, 2012, Energy scenario and vision 2020 in India, J Sustain Energy Environ, 3
Bhandarkar, 2013, Vehicular pollution, their effect on human health and mitigation measures, VE, 1, 3340
Mata, 2010, Microalgae for biodiesel production and other applications: a review, Renew Sustain Energy Rev, 14, 217, 10.1016/j.rser.2009.07.020
Kim, 2015, A review on the human health impact of airborne particulate matter, Environ Int, 74, 136, 10.1016/j.envint.2014.10.005
Hazar, 2009, Effects of biodiesel on a low heat loss diesel engine, Renew Energy, 34, 1533, 10.1016/j.renene.2008.11.008
Ozsezen, 2009, Performance and combustion characteristics of a DI diesel engine fueled with waste palm oil and canola oil methyl esters, Fuel, 88, 629, 10.1016/j.fuel.2008.09.023
Utlu, 2008, The effect of biodiesel fuel obtained from waste frying oil on direct injection diesel engine performance and exhaust emissions, Renew Energy, 33, 1936, 10.1016/j.renene.2007.10.006
Özgünay, 2007, Performance and emission study of biodiesel from leather industry pre-fleshings, Waste Manage, 27, 1897, 10.1016/j.wasman.2006.08.014
Reyes, 2006, PM-10 emissions and power of a diesel engine fueled with crude and refined biodiesel from salmon oil, Fuel, 85, 1714, 10.1016/j.fuel.2006.02.001
Lin, 2009, Experimental study of the effects of vegetable oil methyl ester on DI diesel engine performance characteristics and pollutant emissions, Fuel, 88, 1779, 10.1016/j.fuel.2009.04.006
Yadav, 2016, Performance and emission characteristics of a transportation diesel engine operated with non-edible vegetable oils biodiesel, Case Stud Therm Eng, 8, 236, 10.1016/j.csite.2016.08.001
Hassaneen, 2012, Fuel economy and emission characteristics of Gas-to-Liquid (GTL) and Rapeseed Methyl Ester (RME) as alternative fuels for diesel engines, Fuel, 97, 125, 10.1016/j.fuel.2012.01.077
Allocca, 2014, Evaluation of RME (rapeseed methyl ester) and mineral diesel fuels behaviour in quiescent vessel and EURO 5 engine, Energy, 77, 783, 10.1016/j.energy.2014.09.050
Millo, 2015, Effects of different biofuels blends on performance and emissions of an automotive diesel engine, Fuel, 159, 614, 10.1016/j.fuel.2015.06.096
Singh, 2015, Emissions and fuel consumption characteristics of a heavy duty diesel engine fueled with hydroprocessed renewable diesel and biodiesel, Appl Energy, 155, 440, 10.1016/j.apenergy.2015.06.020
Chang, 2014, Use of water containing acetone-butanol-ethanol for NO x-PM (nitrogen oxide-particulate matter) trade-off in the diesel engine fueled with biodiesel, Energy, 64, 678, 10.1016/j.energy.2013.10.077
Behçet, 2015, Comparison of exhaust emissions of biodiesel–diesel fuel blends produced from animal fats, Renew Sustain Energy Rev, 46, 157, 10.1016/j.rser.2015.02.015
Imtenan, 2015, Effect of n-butanol and diethyl ether as oxygenated additives on combustion-emission-performance characteristics of a multiple cylinder diesel engine fuelled with diesel-jatropha biodiesel blend, Energy Convers Manage, 94, 84, 10.1016/j.enconman.2015.01.047
Özener, 2014, Effects of soybean biodiesel on a DI diesel engine performance, emission and combustion characteristics, Fuel, 115, 875, 10.1016/j.fuel.2012.10.081
Wei, 2017, Influence of waste cooking oil biodiesel on combustion, unregulated gaseous emissions and particulate emissions of a direct-injection diesel engine, Energy, 127, 175, 10.1016/j.energy.2017.03.117
Dhamodaran, 2017, A comparative study of combustion, emission, and performance characteristics of rice-bran-, neem-, and cottonseed-oil biodiesels with varying degree of unsaturation, Fuel, 187, 296, 10.1016/j.fuel.2016.09.062
Aydin, 2010, An experimental study on the exhaust emissions of a partially loaded compressed ignition engine fueled with biodiesel derived from cottonseed oil, Energy Sources, Part A Recover Util Environ Eff, 32, 1076, 10.1080/15567030903077857
Macor, 2011, Effects of 30% v/v biodiesel/diesel fuel blend on regulated and unregulated pollutant emissions from diesel engines, Appl Energy, 88, 4989, 10.1016/j.apenergy.2011.06.045
Bari, 2014, Performance, combustion and emission tests of a metro-bus running on biodiesel-ULSD blended (B20) fuel, Appl Energy, 124, 35, 10.1016/j.apenergy.2014.03.007
Yang, 2015, Comparison of carbonyl compound emissions from a diesel engine generator fueled with blends of n-butanol, biodiesel and diesel, Energy, 90, 266, 10.1016/j.energy.2015.06.070
Kalligeros, 2003, An investigation of using biodiesel/marine diesel blends on the performance of a stationary diesel engine, Biomass Bioenergy, 24, 141, 10.1016/S0961-9534(02)00092-2
Tan, 2014, Particle number emissions from a light-duty diesel engine with biodiesel fuels under transient-state operating conditions, Appl Energy, 113, 22, 10.1016/j.apenergy.2013.07.009
Wang, 2000, Emissions from nine heavy trucks fueled by diesel and biodiesel blend without engine modification, Environ Sci Technol, 34, 933, 10.1021/es981329b
Lapuerta, 2008, Effect of biodiesel fuels on diesel engine emissions, Prog Energy Combust Sci, 34, 198, 10.1016/j.pecs.2007.07.001
Korres, 2008, Aviation fuel JP-5 and biodiesel on a diesel engine, Fuel, 87, 70, 10.1016/j.fuel.2007.04.004
Bueno, 2017, Performance and emissions characteristics of castor oil biodiesel fuel blends, Appl Therm Eng, 125, 559, 10.1016/j.applthermaleng.2017.06.114
Kathirvelu, 2017, Emission characteristics of biodiesel obtained from jatropha seeds and fish wastes in a diesel engine, Sustain Environ Res, 27, 283, 10.1016/j.serj.2017.06.004
Canakci, 2003, Comparison of engine performance and emissions for petroleum diesel fuel, yellow grease biodiesel, and soybean oil biodiesel, Trans ASAE, 46, 937, 10.13031/2013.13948
Shahir, 2015, Comparative study of diesel and biodiesel on CI engine with emphasis to emissions-a review, Renew Sustain Energy Rev, 45, 686, 10.1016/j.rser.2015.02.042
Babu, 2017, Effect of biodiesel-diesel-n-pentanol and biodiesel-diesel-n-hexanol blends on diesel engine emission and combustion characteristics, Energy, 133, 761, 10.1016/j.energy.2017.05.103
Liu, 2017, Combustion and emission characteristics of a direct injection diesel engine fueled with biodiesel and PODE/biodiesel fuel blends, Fuel, 209, 62, 10.1016/j.fuel.2017.07.066
Devarajan, 2017, Performance, combustion and emission analysis on the effect of ferrofluid on neat biodiesel, Process Saf Environ Prot, 111, 283, 10.1016/j.psep.2017.07.021
Can, 2017, Combustion and exhaust emissions of canola biodiesel blends in a single cylinder DI diesel engine, Renew Energy, 109, 73, 10.1016/j.renene.2017.03.017
Agarwal, 2006, Experimental investigation of control of NOx emissions in biodiesel-fueled compression ignition engine, Renew Energy, 31, 2356, 10.1016/j.renene.2005.12.003
Shi, 2005, Emission characteristics using methyl soyate-ethanol-diesel fuel blends on a diesel engine, Fuel, 84, 1543
Tsolakis, 2007, Engine performance and emissions of a diesel engine operating on diesel-RME (rapeseed methyl ester) blends with EGR (exhaust gas recirculation), Energy, 32, 2072, 10.1016/j.energy.2007.05.016
Zheng, 2008, Biodiesel engine performance and emissions in low temperature combustion, Fuel, 87, 714, 10.1016/j.fuel.2007.05.039
Shi, 2017, A study on combined effect of high EGR rate and biodiesel on combustion and emission performance of a diesel engine, Appl Therm Eng, 125, 1272, 10.1016/j.applthermaleng.2017.07.083
Banapurmath, 2012, Experimental investigations on performance and emission characteristics of Honge oil biodiesel (HOME) operated compression ignition engine, Renew Energy, 48, 193, 10.1016/j.renene.2012.04.010
Hwang, 2014, Effect of injection parameters on the combustion and emission characteristics in a common-rail direct injection diesel engine fueled with waste cooking oil biodiesel, Renew Energy, 63, 9, 10.1016/j.renene.2013.08.051
Xue, 2011, Effect of biodiesel on engine performances and emissions, Renew Sustain Energy Rev, 15, 1098, 10.1016/j.rser.2010.11.016
Prabu, 2017, Performance, combustion and emission characteristics of diesel engine fuelled with waste cooking oil bio-diesel/diesel blends with additives, Energy, 122, 638, 10.1016/j.energy.2017.01.119
Yang, 2016, Emission evaluation of a diesel engine generator operating with a proportion of isobutanol as a fuel additive in biodiesel blends, Appl Therm Eng, 100, 628, 10.1016/j.applthermaleng.2016.01.118
Zheng, 2016, Experimental study on the combustion and emissions fueling biodiesel/n-butanol, biodiesel/ethanol and biodiesel/2, 5-dimethylfuran on a diesel engine, Energy, 115, 539, 10.1016/j.energy.2016.09.054
Keskin, 2008, Influence of tall oil biodiesel with Mg and Mo based fuel additives on diesel engine performance and emission, Bioresour Technol, 99, 6434, 10.1016/j.biortech.2007.11.051
Vedharaj, 2014, Effect of adding 1, 4-Dioxane with kapok biodiesel on the characteristics of a diesel engine, Appl Energy, 136, 1166, 10.1016/j.apenergy.2014.04.012
Imdadul, 2016, Influences of ignition improver additive on ternary (diesel-biodiesel-higher alcohol) blends thermal stability and diesel engine performance, Energy Convers Manage, 123, 252, 10.1016/j.enconman.2016.06.040
Prabakaran, 2016, Experimental investigation into effects of addition of zinc oxide on performance, combustion and emission characteristics of diesel-biodiesel-ethanol blends in CI engine, Alexandria Eng J, 55, 3355, 10.1016/j.aej.2016.08.022
Imdadul, 2017, Evaluation of oxygenated n-butanol-biodiesel blends along with ethyl hexyl nitrate as cetane improver on diesel engine attributes, J Clean Prod, 141, 928, 10.1016/j.jclepro.2016.09.140
Rashed, 2016, Improving oxidation stability and NO X reduction of biodiesel blends using aromatic and synthetic antioxidant in a light duty diesel engine, Ind Crops Prod, 89, 273, 10.1016/j.indcrop.2016.05.008
Pérez, 2008, Partitioning of major and trace components in PM 10-PM 2.5-PM 1 at an urban site in Southern Europe, Atmos Environ, 42, 1677, 10.1016/j.atmosenv.2007.11.034
Imdadul, 2016, Higher alcohol-biodiesel-diesel blends: an approach for improving the performance, emission, and combustion of a light-duty diesel engine, Energy Convers Manage, 111, 174, 10.1016/j.enconman.2015.12.066
Rakopoulos, 2013, Combustion and emissions of cottonseed oil and its bio-diesel in blends with either n-butanol or diethyl ether in HSDI diesel engine, Fuel, 105, 603, 10.1016/j.fuel.2012.08.023
Arbab, 2015, Evaluation of combustion, performance, and emissions of optimum palm-coconut blend in turbocharged and non-turbocharged conditions of a diesel engine, Energy Convers Manage, 90, 111, 10.1016/j.enconman.2014.11.017
Rakopoulos, 2007, Study of the performance and emissions of a high-speed direct injection diesel engine operating on ethanoldiesel fuel blends, Int J Altern Propuls, 1, 309, 10.1504/IJAP.2007.013020
Fattah, 2014, Effect of antioxidants on oxidation stability of biodiesel derived from vegetable and animal based feedstocks, Renew Sustain Energy Rev, 30, 356, 10.1016/j.rser.2013.10.026
Yuvarajan, 2016, Effect of magnetite ferrofluid on the performance and emissions characteristics of diesel engine using methyl esters of mustard oil, Arab J Sci Eng, 41, 2023, 10.1007/s13369-016-2060-3
Imdadul, 2016, A comparative study of C 4 and C 5 alcohol treated diesel-biodiesel blends in terms of diesel engine performance and exhaust emission, Fuel, 179, 281, 10.1016/j.fuel.2016.04.003
Hoekman, 2012, Review of the effects of biodiesel on NOx emissions, Fuel Process Technol, 96, 237, 10.1016/j.fuproc.2011.12.036
Zareh, 2017, Comparative assessment of performance and emission characteristics of castor, coconut and waste cooking based biodiesel as fuel in a diesel engine, Energy, 139, 883, 10.1016/j.energy.2017.08.040
Alptekin, 2017, Emission, injection and combustion characteristics of biodiesel and oxygenated fuel blends in a common rail diesel engine, Energy, 119, 44, 10.1016/j.energy.2016.12.069
Gharehghani, 2017, Effects of waste fish oil biodiesel on diesel engine combustion characteristics and emission, Renew Energy, 101, 930, 10.1016/j.renene.2016.09.045
Alloune, 2017, Performance, combustion and exhaust emissions characteristics investigation using Citrullus colocynthis L. biodiesel in DI diesel engine, J Energy Inst
Monirul, 2016, Assessment of performance, emission and combustion characteristics of palm, jatropha and Calophyllum inophyllum biodiesel blends, Fuel, 181, 985, 10.1016/j.fuel.2016.05.010
Man, 2016, Influence of engine load and speed on regulated and unregulated emissions of a diesel engine fueled with diesel fuel blended with waste cooking oil biodiesel, Fuel, 180, 41, 10.1016/j.fuel.2016.04.007
Sanjid, 2016, Performance and emission of multi-cylinder diesel engine using biodiesel blends obtained from mixed inedible feedstocks, J Clean Prod, 112, 4114, 10.1016/j.jclepro.2015.07.154
Nalgundwar, 2016, Comparison of performance and emissions characteristics of DI CI engine fueled with dual biodiesel blends of palm and jatropha, Fuel, 173, 172, 10.1016/j.fuel.2016.01.022
Mosarof, 2016, Optimization of performance, emission, friction and wear characteristics of palm and Calophyllum inophyllum biodiesel blends, Energy Convers Manag, 118, 119, 10.1016/j.enconman.2016.03.081
Aydın, 2016, Scrutinizing the combustion, performance and emissions of safflower biodiesel-kerosene fueled diesel engine used as power source for a generator, Energy Convers Manage, 117, 400, 10.1016/j.enconman.2016.03.046
Özçelik, 2015, Determining the performance, emission and combustion properties of camelina biodiesel blends, Energy Convers Manage, 96, 47, 10.1016/j.enconman.2015.02.024
Tan, 2012, Exhaust emissions from a light-duty diesel engine with Jatropha biodiesel fuel, Energy, 39, 356, 10.1016/j.energy.2012.01.002
Altaie, 2015, Performance and exhaust emission characteristics of direct-injection diesel engine fueled with enriched biodiesel, Energy Convers Manage, 106, 365, 10.1016/j.enconman.2015.09.050
Rashed, 2016, Performance and emission characteristics of a diesel engine fueled with palm, jatropha, and moringa oil methyl ester, Ind Crops Prod, 79, 70, 10.1016/j.indcrop.2015.10.046
How, 2014, An investigation of the engine performance, emissions and combustion characteristics of coconut biodiesel in a high-pressure common-rail diesel engine, Energy, 69, 749, 10.1016/j.energy.2014.03.070
Chen, 2016, Influence of fuel temperature on combustion and emission of biodiesel, J Energy Inst, 89, 231, 10.1016/j.joei.2015.01.024
Nair, 2016, Analysis of performance and emission on compression ignition engine fuelled with blends of neem biodiesel, Egypt J Pet
Al-lwayzy, 2017, Diesel engine performance and exhaust gas emissions using Microalgae Chlorella protothecoides biodiesel, Renew Energy, 101, 690, 10.1016/j.renene.2016.09.035
Murugan, 2008, A comparative study on the performance, emission and combustion studies of a DI diesel engine using distilled tyre pyrolysis oil-diesel blends, Fuel, 87, 2111, 10.1016/j.fuel.2008.01.008
Hellier, 2015, The influence of straight vegetable oil fatty acid composition on compression ignition combustion and emissions, Fuel, 143, 131, 10.1016/j.fuel.2014.11.021
Hosseini, 2017, Performance and emission characteristics of a CI engine fuelled with carbon nanotubes and diesel-biodiesel blends, Renew Energy, 111, 201, 10.1016/j.renene.2017.04.013
Aydin, 2011, Exhaust emissions of a CI engine operated with biodiesel from rapeseed oil, Energy Sources, Part A Recover Util Environ Eff, 33, 1523, 10.1080/15567030903397982
Sahoo, 2007, Biodiesel development from high acid value polanga seed oil and performance evaluation in a CI engine, Fuel, 86, 448, 10.1016/j.fuel.2006.07.025
Alptekin, 2015, Using waste animal fat based biodiesels-bioethanol-diesel fuel blends in a DI diesel engine, Fuel, 157, 245, 10.1016/j.fuel.2015.04.067
Sakthivel, 2017, Shameer PM. A review on the properties, performance and emission aspects of the third generation biodiesels, Renew Sustain Energy Rev
Musthafa, 2017, Development of performance and emission characteristics on coated diesel engine fuelled by biodiesel with Cetane number enhancing additive, Energy, 10.1016/j.energy.2017.06.012
Raheman, 2007, Performance of compression ignition engine with mahua (Madhuca indica) biodiesel, Fuel, 86, 2568, 10.1016/j.fuel.2007.02.019
Hoseini, 2017, Effects of biodiesel fuel obtained from Salviamacrosiphon oil (ultrasonic-assisted) on performance and emissions of diesel engine, Energy, 131, 289, 10.1016/j.energy.2017.04.150
Ruhul, 2016, Impact of fatty acid composition and physicochemical properties of Jatropha and Alexandrian laurel biodiesel blends: An analysis of performance and emission characteristics, J Clean Prod, 133, 1181, 10.1016/j.jclepro.2016.06.017
Pulkrabek, 2004, Thermochemistry and fuels, Eng Fundam Intern Combust Engine, 168
Gnanasekaran, 2016, Influence of injection timing on performance, emission and combustion characteristics of a DI diesel engine running on fish oil biodiesel, Energy, 116, 1218, 10.1016/j.energy.2016.10.039
Szybist, 2003, Behavior of a diesel injection system with biodiesel fuel, SAE Technical Paper, 10.4271/2003-01-1039
Tat ME, Van Gerpen JH, Wang PS. Fuel property effects on injection timing, ignition timing and oxides of nitrogen emissions from biodiesel-fueled engines. 2004 ASAE Annu. Meet., American Society of Agricultural and Biological Engineers; 2004. p. 1.
Bhaskar, 2013, Optimization of FOME (fish oil methyl esters) blend and EGR (exhaust gas recirculation) for simultaneous control of NO x and particulate matter emissions in diesel engines, Energy, 62, 224, 10.1016/j.energy.2013.09.056
Hosseini, 2017, Effect of added alumina as nano-catalyst to diesel-biodiesel blends on performance and emission characteristics of CI engine, Energy, 124, 543, 10.1016/j.energy.2017.02.109
Tüccar, 2014, Diesel engine emissions and performance from blends of citrus sinensis biodiesel and diesel fuel, Fuel, 132, 7, 10.1016/j.fuel.2014.04.065
Pradeep, 2007, Use of HOT EGR for NOx control in a compression ignition engine fuelled with bio-diesel from Jatropha oil, Renew Energy, 32, 1136, 10.1016/j.renene.2006.04.017
Saleh, 2009, Experimental study on diesel engine nitrogen oxide reduction running with jojoba methyl ester by exhaust gas recirculation, Fuel, 88, 1357, 10.1016/j.fuel.2009.01.023
Agarwal, 2015, Effect of fuel injection pressure and injection timing of Karanja biodiesel blends on fuel spray, engine performance, emissions and combustion characteristics, Energy Convers Manage, 91, 302, 10.1016/j.enconman.2014.12.004
An, 2015, Modeling analysis of urea direct injection on the NOx emission reduction of biodiesel fueled diesel engines, Energy Convers Manage, 101, 442, 10.1016/j.enconman.2015.06.008
Roh, 2015, Impact of DME-biodiesel, diesel-biodiesel and diesel fuels on the combustion and emission reduction characteristics of a CI engine according to pilot and single injection strategies, J Energy Inst, 88, 376, 10.1016/j.joei.2014.11.005
Qi, 2011, Effect of EGR and injection timing on combustion and emission characteristics of split injection strategy DI-diesel engine fueled with biodiesel, Fuel, 90, 1884, 10.1016/j.fuel.2011.01.016
Goldsborough, 2015, Experimental and modeling study of fuel interactions with an alkyl nitrate cetane enhancer, 2-ethyl-hexyl nitrate, Proc Combust Inst, 35, 571, 10.1016/j.proci.2014.06.048
Ramadhas, 2005, Performance and emission evaluation of a diesel engine fueled with methyl esters of rubber seed oil, Renew Energy, 30, 1789, 10.1016/j.renene.2005.01.009
Reed K. Inventor; Cerion Tech Inc, assignee, Cerium dioxide nanoparticle-containing fuel additive, United States patent application US 13/662,511; 2013.
Scattergood R. inventor; Oxonica Ltd, assignee. Cerium oxide nanoparticles as fuel additives. United States patent application US 10/542,770; 2006.
Basha, 2014, Performance, emission and combustion characteristics of a diesel engine using carbon nanotubes blended jatropha methyl ester emulsions, Alexandria Eng J, 53, 259, 10.1016/j.aej.2014.04.001
Ashok, 2017, Comparative analysis on the effect of zinc oxide and ethanox as additives with biodiesel in CI engine, Energy, 140, 352, 10.1016/j.energy.2017.09.021
Bhuiyan, 2015, Experimental investigation on surface tension of metal oxide-water nanofluids, Int Commun Heat Mass Transf, 65, 82, 10.1016/j.icheatmasstransfer.2015.01.002
Ahmari, 2016, On the relationship between surface tension and viscosity of fluids, Chem Eng Res Bull, 18, 18, 10.3329/cerb.v18i1.26217
Kuzhiyil, 2009, Energy recovery from waste plastics by using blends of biodiesel and polystyrene in diesel engines, Energy Fuels, 23, 3246, 10.1021/ef801110j
Suh, 2010, Effect of multiple injection strategies on the spray atomization and reduction of exhaust emissions in a compression ignition engine fueled with dimethyl ether (DME), Energy Fuels, 24, 1323, 10.1021/ef9010143
Patel, 2016, Biodiesel production from Karanja oil and its use in diesel engine: A review, Renew Sustain Energy Rev
Ashok, 2017, An assessment of Calophyllum inophyllum biodiesel fuelled diesel engine characteristics using novel antioxidant additives, Energy Convers Manage, 148, 935, 10.1016/j.enconman.2017.06.049
Roy, 2016, Emission analysis of a modern Tier 4 DI diesel engine fueled by biodiesel-diesel blends with a cold flow improver (Wintron Synergy) at multiple idling conditions, Appl Energy, 179, 45, 10.1016/j.apenergy.2016.06.129
Ashraful, 2014, Influence of anti-corrosion additive on the performance, emission and engine component wear characteristics of an IDI diesel engine fueled with palm biodiesel, Energy Convers Manage, 87, 48, 10.1016/j.enconman.2014.06.093
Velmurugan, 2016, Impact of antioxidants on NOx emissions from a mango seed biodiesel powered DI diesel engine, Alexandria Eng J, 55, 715, 10.1016/j.aej.2015.10.004
Perumal, 2017, Experimental analysis of engine performance, combustion and emission using pongamia biodiesel as fuel in CI engine, Energy, 129, 228, 10.1016/j.energy.2017.04.120
Celik, 2017, The determination of effects of soybean and hazelnut methyl ester addition to the diesel fuel on the engine performance and exhaust emissions, Appl Therm Eng
Mofijur, 2014, Comparative evaluation of performance and emission characteristics of Moringa oleifera and Palm oil based biodiesel in a diesel engine, Ind Crops Prod, 53, 78, 10.1016/j.indcrop.2013.12.011
Mofijur, 2013, Evaluation of biodiesel blending, engine performance and emissions characteristics of Jatropha curcas methyl ester: Malaysian perspective, Energy, 55, 879, 10.1016/j.energy.2013.02.059
Mofijur, 2014, Properties and use of Moringa oleifera biodiesel and diesel fuel blends in a multi-cylinder diesel engine, Energy Convers Manage, 82, 169, 10.1016/j.enconman.2014.02.073
Valente, 2010, Fuel consumption and emissions from a diesel power generator fuelled with castor oil and soybean biodiesel, Fuel, 89, 3637, 10.1016/j.fuel.2010.07.041
Gumus, 2012, The impact of fuel injection pressure on the exhaust emissions of a direct injection diesel engine fueled with biodiesel-diesel fuel blends, Fuel, 95, 486, 10.1016/j.fuel.2011.11.020
Kaisan, 2017, Exhaust emissions of biodiesel binary and multi-blends from Cotton, Jatropha and Neem oil from stationary multi cylinder CI engine, Transp Res Part D Transp Environ, 53, 403, 10.1016/j.trd.2017.04.040
Lin, 2006, Diesel engine performance and emission characteristics of biodiesel produced by the peroxidation process, Fuel, 85, 298, 10.1016/j.fuel.2005.05.018
Pinzi, 2013, The effect of biodiesel fatty acid composition on combustion and diesel engine exhaust emissions, Fuel, 104, 170, 10.1016/j.fuel.2012.08.056
Zhu, 2016, A comparison of particulate emission for rapeseed oil methyl ester, palm oil methyl ester and soybean oil methyl ester in perspective of their fatty ester composition, Appl Therm Eng, 94, 249, 10.1016/j.applthermaleng.2015.10.132
Yilmaz, 2017, Experimental assessment of a diesel engine fueled with diesel-biodiesel-1-pentanol blends, Fuel, 191, 190, 10.1016/j.fuel.2016.11.065
Al-Hasan, 2003, Effect of ethanol-unleaded gasoline blends on engine performance and exhaust emission, Energy Convers Manage, 44, 1547, 10.1016/S0196-8904(02)00166-8
Qi, 2010, Experimental studies on the combustion characteristics and performance of a direct injection engine fueled with biodiesel/diesel blends, Energy Convers Manage, 51, 2985, 10.1016/j.enconman.2010.06.042
Canakci, 2008, An experimental study for the effects of boost pressure on the performance and exhaust emissions of a DI-HCCI gasoline engine, Fuel, 87, 1503, 10.1016/j.fuel.2007.08.002
Yasin, 2014, Characterization of a diesel engine operating with a small proportion of methanol as a fuel additive in biodiesel blend, Appl Energy, 114, 865, 10.1016/j.apenergy.2013.06.012
Imtenan, 2014, Impact of oxygenated additives to palm and jatropha biodiesel blends in the context of performance and emissions characteristics of a light-duty diesel engine, Energy Convers Manage, 83, 149, 10.1016/j.enconman.2014.03.052
Yilmaz, 2017, Influence of 1-pentanol additive on the performance of a diesel engine fueled with waste oil methyl ester and diesel fuel, Fuel, 207, 461, 10.1016/j.fuel.2017.06.093
Huang, 2015, Visualization research on spray atomization, evaporation and combustion processes of ethanol-diesel blend under LTC conditions, Energy Convers Manage, 106, 911, 10.1016/j.enconman.2015.10.028
Ickes, 2009, Effect of fuel cetane number on a premixed diesel combustion mode, Int J Engine Res, 10, 251, 10.1243/14680874JER03809
Rahmanian, 2014, Investigation of pollutant reduction by simulation of turbulent non-premixed pulverized coal combustion, Appl Therm Eng, 73, 1222, 10.1016/j.applthermaleng.2014.09.016
Yuvarajan, 2018, Experimental investigation on the influence of titanium dioxide nanofluid on emission pattern of biodiesel in a diesel engine, Atmos Pollut Res, 9, 47, 10.1016/j.apr.2017.06.003
Fattah, 2014, Performance and emission characteristics of a CI engine fueled with Cocos nucifera and Jatropha curcas B20 blends accompanying antioxidants, Ind Crops Prod, 57, 132, 10.1016/j.indcrop.2014.03.022
Sharma, 2017, Effect of blending waste tyre derived fuel on oxidation stability of biodiesel and performance and emission studies of a diesel engine, Appl Therm Eng, 118, 365, 10.1016/j.applthermaleng.2017.03.008
Atabani, 2014, Effect of Croton megalocarpus, Calophyllum inophyllum, Moringa oleifera, palm and coconut biodiesel-diesel blending on their physico-chemical properties, Ind Crops Prod, 60, 130, 10.1016/j.indcrop.2014.06.011
Northrop, 2011, Condensational growth of particulate matter from partially premixed low temperature combustion of biodiesel in a compression ignition engine, Aerosol Sci Technol, 45, 26, 10.1080/02786826.2010.517579
Can, 2014, Combustion characteristics, performance and exhaust emissions of a diesel engine fueled with a waste cooking oil biodiesel mixture, Energy Convers Manage, 87, 676, 10.1016/j.enconman.2014.07.066
Li, 2015, Combustion and emission characteristics of diesel engine fueled with diesel/biodiesel/pentanol fuel blends, Fuel, 156, 211, 10.1016/j.fuel.2015.04.048
Yilmaz, 2012, Comparative analysis of biodiesel-ethanol-diesel and biodiesel-methanol-diesel blends in a diesel engine, Energy, 40, 210, 10.1016/j.energy.2012.01.079
Chauhan, 2010, Performance and emission study of preheated Jatropha oil on medium capacity diesel engine, Energy, 35, 2484, 10.1016/j.energy.2010.02.043
Sanli, 2015, Effects of waste frying oil based methyl and ethyl ester biodiesel fuels on the performance, combustion and emission characteristics of a DI diesel engine, Fuel, 159, 179, 10.1016/j.fuel.2015.06.081
Guarieiro, 2014, Assessment of the use of oxygenated fuels on emissions and performance of a diesel engine, Microchem J, 117, 94, 10.1016/j.microc.2014.06.004
Pulkrabek, 2014
Daho, 2013, Influence of engine load and fuel droplet size on performance of a CI engine fueled with cottonseed oil and its blends with diesel fuel, Appl Energy, 111, 1046, 10.1016/j.apenergy.2013.05.059
Pillay, 2012, Engine emissions and performances with alternative biodiesels: A review, J Sustain Dev, 5, 59, 10.5539/jsd.v5n4p59
Chong, 2015, Oxygenated palm biodiesel: ignition, combustion and emissions quantification in a light-duty diesel engine, Energy Convers Manage, 101, 317, 10.1016/j.enconman.2015.05.058
Kinoshita, 2007, Combustion characteristics of diesel engine with coconut oil ethyl ester, SAE Technical Paper, 10.4271/2007-01-2021
Yamin, 2000, Effect of combustion duration on the performance and emission characteristics of a spark ignition engine using hydrogen as a fuel, Int J Hydrogen Energy, 25, 581, 10.1016/S0360-3199(99)00031-2
Reis, 2003, Pot conversion of methane into acetic acid in the absence of CO and with vanadium catalysts such as Amavadine, Angew Chemie, 115, 845, 10.1002/ange.200390188
Zheng, 2003, The mutual conversion of CO2 and CO in dielectric barrier discharge (DBD), Plasma Chem Plasma Process, 23, 59, 10.1023/A:1022464702294
Keskin, 2011, Influence of metallic based fuel additives on performance and exhaust emissions of diesel engine, Energy Convers Manage, 52, 60, 10.1016/j.enconman.2010.06.039
Ch opek, 2005, The influence of metalloorganic fuel additives on CI engine emission, Polish J Environ Stud, 14
Gürü M, Karakaya U ur, Alt parmak D, Al c lar A. Improvement of diesel fuel properties by using additives. Energy Convers Manag 2002;43:1021–5.
Zeller HW, Westphal TE. Effectiveness of Iron-based Fuel Additives on Diesel Soot Control. US Department of the Interior, Bureau of Mines; 1992.
May, 2005, Catalyst for improving the combustion efficiency of petroleum fuels in diesel engines. 11th diesel engine Emiss, Reduct Conf, 1
Jung, 2005, The influence of a cerium additive on ultrafine diesel particle emissions and kinetics of oxidation, Combust Flame, 142, 276, 10.1016/j.combustflame.2004.11.015
Caton, 1991, Performance and fuel consumption of a single-cylinder, direct-injection diesel engine using a platinum fuel additive, SAE Trans, 46
Cheung, 2009, Regulated and unregulated emissions from a diesel engine fueled with biodiesel and biodiesel blended with methanol, Atmos Environ, 43, 4865, 10.1016/j.atmosenv.2009.07.021
Parikh, 2013, Performance evaluation and emission analysis of 4-S, IC engine using ethanol bio-diesel blended with diesel fuel, Int J Res Eng Technol, 2, 465, 10.15623/ijret.2013.0204009
Zheng, 2015, Direct injection of neat n-butanol for enabling clean low temperature combustion in a modern diesel engine, Fuel, 142, 28, 10.1016/j.fuel.2014.10.075
Fayyazbakhsh, 2017, Comprehensive overview on diesel additives to reduce emissions, enhance fuel properties and improve engine performance, Renew Sustain Energy Rev, 74, 891, 10.1016/j.rser.2017.03.046
Fischer, 2005, Biotic and abiotic transformations of methyl tertiary butyl ether (MTBE)*(6 pp), Environ Sci Pollut Res, 12, 381, 10.1065/espr2005.08.277
Farkade, 2012, Experimental investigation of methanol, ethanol and butanol blends with gasoline on SI engine, Int J Emerg Technol Adv Eng, 2, 205
Coniglio, 2013, Combustion chemical kinetics of biodiesel and related compounds (methyl and ethyl esters): experiments and modeling-advances and future refinements, Prog Energy Combust Sci, 39, 340, 10.1016/j.pecs.2013.03.002
Wang, 2012, Diesel engine gaseous and particle emissions fueled with diesel-oxygenate blends, Fuel, 94, 317, 10.1016/j.fuel.2011.09.016
Christensen, 2014, Long-term storage stability of biodiesel and biodiesel blends, Fuel Process Technol, 128, 339, 10.1016/j.fuproc.2014.07.045
Sulistyo, 2015, Influence of synthetic antioxidants on the oxidation stability of biodiesel produced from acid raw Jatropha curcas oil, Fuel Process Technol, 132, 133, 10.1016/j.fuproc.2014.12.003
Ileri, 2013, Effects of antioxidant additives on engine performance and exhaust emissions of a diesel engine fueled with canola oil methyl ester-diesel blend, Energy Convers Manage, 76, 145, 10.1016/j.enconman.2013.07.037
Gumus, 2010, Performance and emission evaluation of a compression ignition engine using a biodiesel (apricot seed kernel oil methyl ester) and its blends with diesel fuel, Biomass Bioenergy, 34, 134, 10.1016/j.biombioe.2009.10.010
Hazar, 2010, Performance and emission evaluation of a CI engine fueled with preheated raw rapeseed oil (RRO)-diesel blends, Appl Energy, 87, 786, 10.1016/j.apenergy.2009.05.021
Rajaeifar, 2017, Expanded polystyrene waste application for improving biodiesel environmental performance parameters from life cycle assessment point of view, Renew Sustain Energy Rev, 74, 278, 10.1016/j.rser.2017.02.032
Chiu, 2004, Impact of cold flow improvers on soybean biodiesel blend, Biomass Bioenergy, 27, 485, 10.1016/j.biombioe.2004.04.006
Couet J, Maehling F-O, Koschabek R, Kuenzel S. Use of cold flow improver compositions for fuels, blends thereof with biofuels and formulations thereof 2015.
Batt RJ, McMillan JA, Bradbury IP. Lubricity additives-performance and no-harm effects in low sulfur fuels. SAE Technical Paper; 1996.
Racha A, Thota C, Gokak DTS, Gajbhiye VK, Bhargava S. Fuel composition as lubricity improver and method thereof 2018.
Atmanli, 2016, Effects of a cetane improver on fuel properties and engine characteristics of a diesel engine fueled with the blends of diesel, hazelnut oil and higher carbon alcohol, Fuel, 172, 209, 10.1016/j.fuel.2016.01.013
Lü X cai, Yang J guang, Zhang W gao, Huang Z. Improving the combustion and emissions of direct injection compression ignition engines using oxygenated fuel additives combined with a cetane number improver. Energy & Fuels 2005;19:1879–88.
Li, 2014, Effects of cetane number improvers on the performance of diesel engine fuelled with methanol/biodiesel blend, Fuel, 128, 180, 10.1016/j.fuel.2014.03.011
Gumus, 2016, Aluminum oxide and copper oxide nanodiesel fuel properties and usage in a compression ignition engine, Fuel, 163, 80, 10.1016/j.fuel.2015.09.048
Jiaqiang, 2018, Performance and emission evaluation of a marine diesel engine fueled by water biodiesel-diesel emulsion blends with a fuel additive of a cerium oxide nanoparticle, Energy Convers Manage, 169, 194, 10.1016/j.enconman.2018.05.073
Özgür, 2015, Investigation of nanoparticle additives to biodiesel for improvement of the performance and exhaust emissions in a compression ignition engine, Int J Green Energy, 12, 51, 10.1080/15435075.2014.889011
Mohammadi, 2012, Experimental investigation of performance and emission characteristics of DI diesel engine fueled with polymer waste dissolved in biodiesel-blended diesel fuel, Energy, 46, 596, 10.1016/j.energy.2012.07.049
Tosun, 2014, Determination of effects of various alcohol additions into peanut methyl ester on performance and emission characteristics of a compression ignition engine, Fuel, 126, 38, 10.1016/j.fuel.2014.02.037
Ahanchi, 2018, Pistachio (Pistachia vera) wastes valorization: enhancement of biodiesel oxidation stability using hull extracts of different varieties, J Clean Prod, 10.1016/j.jclepro.2018.03.089
Vinukumar, 2018, Biodiesel with nano additives from coconut shell for decreasing emissions in diesel engines, Fuel, 222, 180, 10.1016/j.fuel.2018.02.129
Vinukumar, 2018, Rice husk as nanoadditive in diesel-biodiesel fuel blends used in diesel engine, J Therm Anal Calorim, 131, 1333, 10.1007/s10973-017-6692-7
Rahimi, 2018, Well-to-wheel life cycle assessment of Eruca Sativa-based biorefinery, Renew Energy, 117, 135, 10.1016/j.renene.2017.10.035
Rocha, 2014, Life cycle assessment (LCA) for biofuels in Brazilian conditions: a meta-analysis, Renew Sustain Energy Rev, 37, 435, 10.1016/j.rser.2014.05.036
Møller, 2014, Integrated well-to-wheel assessment of biofuels combining energy and emission LCA and welfare economic cost benefit analysis, Biomass Bioenergy, 60, 41, 10.1016/j.biombioe.2013.11.001
Cherubini, 2009, Energy-and greenhouse gas-based LCA of biofuel and bioenergy systems: Key issues, ranges and recommendations, Resour Conserv Recycl, 53, 434, 10.1016/j.resconrec.2009.03.013
Gnansounou, 2009, Life cycle assessment of biofuels: energy and greenhouse gas balances, Bioresour Technol, 100, 4919, 10.1016/j.biortech.2009.05.067
ISO. 14040 International standard, 2006
ISO. 14044 International standard, 2006
Chiaramonti, 2010, Is life cycle assessment (LCA) a suitable method for quantitative CO 2 saving estimations? The impact of field input on the LCA results for a pure vegetable oil chain, Biomass Bioenergy, 34, 787, 10.1016/j.biombioe.2010.01.022
Mauderly, 2010, Is the air pollution health research community prepared to support a multipollutant air quality management framework?, Inhal Toxicol, 22, 1, 10.3109/08958371003793846
Larcombe, 2015, Biodiesel exhaust: The need for a systematic approach to health effects research, Respirology, 20, 1034, 10.1111/resp.12587
Anderson, 2018, Effect of injection parameters on the reduction of NOx emission in neat bio-diesel fuelled diesel engine, Energy Sources, Part A Recover Util Environ Eff, 40, 186, 10.1080/15567036.2017.1407844
Kumar, 2018, Experimental investigations of oxidation stability of biodiesel produced from Prunus armeniaca oil (apricot oil) and effect of various antioxidants on stability, engine performance and emissions, Fuel, 216, 861, 10.1016/j.fuel.2017.11.147
Mofijur M, Rasul MG, Hassan NMS, Khan MMK, Rashedul HK. Gaseous and Particle Emissions from a Compression Ignition Engine Fueled with Biodiesel-Diesel Blends. Appl. Thermo-fluid Process. Energy Syst., Springer; 2018. p. 35–56.
Joy, 2018, Exhaust emission study on neat biodiesel and alcohol blends fueled diesel engine, Energy Sources, Part A Recover Util Environ Eff, 40, 115, 10.1080/15567036.2017.1405119
Ballesteros, 2010, An experimental study of the influence of biofuel origin on particle-associated PAH emissions, Atmos Environ, 44, 930, 10.1016/j.atmosenv.2009.11.042
Yang, 2017, Development of novel alternative biodiesel fuels for reducing PM emissions and PM-related genotoxicity, Environ Res, 156, 512, 10.1016/j.envres.2017.03.045
Westphal, 2012, Combustion of hydrotreated vegetable oil and jatropha methyl ester in a heavy duty engine: emissions and bacterial mutagenicity, Environ Sci Technol, 46, 6417, 10.1021/es300399e
Surawski, 2011, Physicochemical characterization of particulate emissions from a compression ignition engine employing two injection technologies and three fuels, Environ Sci Technol, 45, 5498, 10.1021/es200388f
Mehus, 2015, Comparison of acute health effects from exposures to diesel and biodiesel fuel emissions, J Occup Environ Med, 57, 705, 10.1097/JOM.0000000000000473
Bass, 2015, Comparative cardiopulmonary toxicity of exhausts from soy-based biofuels and diesel in healthy and hypertensive rats, Inhal Toxicol, 27, 545, 10.3109/08958378.2015.1060279
Mumaw, 2017, Atypical microglial response to biodiesel exhaust in healthy and hypertensive rats, Neurotoxicology, 59, 155, 10.1016/j.neuro.2016.10.012
Shvedova, 2013, Oxidative stress, inflammatory biomarkers, and toxicity in mouse lung and liver after inhalation exposure to 100% biodiesel or petroleum diesel emissions, J Toxicol Environ Heal Part A, 76, 907, 10.1080/15287394.2013.825217
Atkinson, 2010, Urban ambient particle metrics and health: a time-series analysis, Epidemiology, 21, 501, 10.1097/EDE.0b013e3181debc88
Meister, 2012, Estimated short-term effects of coarse particles on daily mortality in Stockholm, Sweden, Environ Health Perspect, 120, 431, 10.1289/ehp.1103995
Correia, 2013, The effect of air pollution control on life expectancy in the United States: an analysis of 545 US counties for the period 2000 to 2007, Epidemiology, 24, 23, 10.1097/EDE.0b013e3182770237
Fang, 2013, Air pollution and associated human mortality: the role of air pollutant emissions, climate change and methane concentration increases from the preindustrial period to present, Atmos Chem Phys, 13, 1377, 10.5194/acp-13-1377-2013
Cadelis, 2014, Short-term effects of the particulate pollutants contained in saharan dust on the visits of children to the emergency department due to asthmatic conditions in Guadeloupe (French Archipelago of the Caribbean), PLoS One, 9, e91136, 10.1371/journal.pone.0091136
İlkılıç, 2011, Determination of performance and exhaust emissions properties of B75 in a CI engine application, Fuel Process Technol, 92, 1790, 10.1016/j.fuproc.2011.04.032
Boström, 2002, Cancer risk assessment, indicators, and guidelines for polycyclic aromatic hydrocarbons in the ambient air, Environ Health Perspect, 110, 451
Zhang, 2016, Investigation of particulate emission characteristics of a diesel engine fueled with higher alcohols/biodiesel blends, Appl Energy, 163, 71, 10.1016/j.apenergy.2015.10.173
Khoshnevisan, 2017, Life cycle assessment of castor-based biorefinery: a well to wheel LCA, Int J Life Cycle Assess, 1
Wuebbles, 2001, Concerns about climate change and the role of fossil fuel use, Fuel Process Technol, 71, 99, 10.1016/S0378-3820(01)00139-4
Watson, 2001
De Oliveira, 2017, History, evolution, and environmental impact of biodiesel in Brazil: A review, Renew Sustain Energy Rev, 75, 168, 10.1016/j.rser.2016.10.060
Farrell, 2014, An introduction to life cycle assessment with hands-on experiments for biodiesel production and use, Educ Chem Eng, 9, 67, 10.1016/j.ece.2014.04.003
Xue, 2012, Regional life cycle assessment of soybean derived biodiesel for transportation fleets, Energy Policy, 48, 295, 10.1016/j.enpol.2012.05.025
Sheehan, 1998
Nanaki, 2012, Comparative LCA of the use of biodiesel, diesel and gasoline for transportation, J Clean Prod, 20, 14, 10.1016/j.jclepro.2011.07.026
Van Zutphen, 2012, LCA GHG emissions in production and combustion of Malaysian palm oil biodiesel, J Oil Palm, Environ Heal, 2
Cornelissen, 2002, The value of the exergetic life cycle assessment besides the LCA, Energy Convers Manage, 43, 1417, 10.1016/S0196-8904(02)00025-0
Atabani, 2012, A comprehensive review on biodiesel as an alternative energy resource and its characteristics, Renew Sustain Energy Rev, 16, 2070, 10.1016/j.rser.2012.01.003
Omer, 2008, Green energies and the environment, Renew Sustain Energy Rev, 12, 1789, 10.1016/j.rser.2006.05.009
Pradhan, 2012, Reassessment of life cycle greenhouse gas emissions for soybean biodiesel, Trans ASABE, 55, 2257, 10.13031/2013.42483
Pimentel, 2005, Ethanol production using corn, switchgrass, and wood; biodiesel production using soybean and sunflower, Nat Resour Res, 14, 65, 10.1007/s11053-005-4679-8
Ulmanen, 2009, Biofuel developments in Sweden and the Netherlands: Protection and socio-technical change in a long-term perspective, Renew Sustain Energy Rev, 13, 1406, 10.1016/j.rser.2008.10.001
Thompson, 2012, The agricultural ethics of biofuels: the food vs. fuel debate, Agriculture, 2, 339, 10.3390/agriculture2040339
Zhang, 2003, Biodiesel production from waste cooking oil: 1. Process design and technological assessment, Bioresour Technol, 89, 1, 10.1016/S0960-8524(03)00040-3
Refaat, 2010, Different techniques for the production of biodiesel from waste vegetable oil, Int J Environ Sci Technol, 7, 183, 10.1007/BF03326130
Pradhan, 2014, Development of biofuels in South Africa: Challenges and opportunities, Renew Sustain Energy Rev, 39, 1089, 10.1016/j.rser.2014.07.131
Pradhan, 2008, The energy balance of soybean oil biodiesel production: a review of past studies, Trans ASABE, 51, 185, 10.13031/2013.24203
Sharma, 2017, Life cycle environmental and economic impact assessment of alternative transport fuels and power-train technologies, Energy, 133, 1132, 10.1016/j.energy.2017.04.160
Liang, 2013, Life cycle assessment of biodiesel production in China, Bioresour Technol, 129, 72, 10.1016/j.biortech.2012.11.037
Shojaeefard, 2013, Experimental investigation on performance and exhaust emissions of castor oil biodiesel from a diesel engine, Environ Technol, 34, 2019, 10.1080/09593330.2013.777080
Tüccar, 2014, Effect of diesel-microalgae biodiesel-butanol blends on performance and emissions of diesel engine, Fuel, 132, 47, 10.1016/j.fuel.2014.04.074
Tan, 2017, Engine performance and emissions characteristics of a diesel engine fueled with diesel-biodiesel-bioethanol emulsions, Energy Convers Manage, 132, 54, 10.1016/j.enconman.2016.11.013
Jiaqiang, 2016, Effect analysis on pressure drop of the continuous regeneration-diesel particulate filter based on NO2 assisted regeneration, Appl Therm Eng, 100, 356, 10.1016/j.applthermaleng.2016.02.031
Zhang, 2016, Multidisciplinary design optimization of the diesel particulate filter in the composite regeneration process, Appl Energy, 181, 14, 10.1016/j.apenergy.2016.08.051
Jiaqiang, 2018, Performance enhancement of a baffle-cut heat exchanger of exhaust gas recirculation, Appl Therm Eng, 134, 86, 10.1016/j.applthermaleng.2018.01.109
Deng, 2018, Effects of cold start control strategy on cold start performance of the diesel engine based on a comprehensive preheat diesel engine model, Appl Energy, 210, 279, 10.1016/j.apenergy.2017.10.093
Aghbashlo, 2019, Multi-objective exergoeconomic and exergoenvironmental optimization of continuous synthesis of solketal through glycerol ketalization with acetone in the presence of ethanol as co-solvent, Renew Energy, 130, 735, 10.1016/j.renene.2018.06.103
Aghbashlo, 2018, On the exergetic optimization of solketalacetin synthesis as a green fuel additive through ketalization of glycerol-derived monoacetin with acetone, Renew Energy, 126, 242, 10.1016/j.renene.2018.03.047
Aghbashlo, 2018, Exergy-based sustainability analysis of acetins synthesis through continuous esterification of glycerol in acetic acid using Amberlyst® 36 as catalyst, J Clean Prod, 183, 1265, 10.1016/j.jclepro.2018.02.218
Aghbashlo, 2018, Multi-objective exergy-based optimization of continuous glycerol ketalization to synthesize solketal as a biodiesel additive in subcritical acetone, Energy Convers Manage, 160, 251, 10.1016/j.enconman.2018.01.044