Exact Solution of the Heat Transfer Problem for a Rotating Disk under Uniform Jet Impingement
Tóm tắt
An exact solution of the heat transfer problem for a uniform air stream impinging on a rotating disk is found. By introducing self-similar radial velocity and temperature profiles, the problem is reduced to a system of ordinary differential equations which are solved numerically. The Nusselt numbers are calculated for Prandtl numbers equal to 1 and 0.71 and various ratios of the free-stream velocity to the disk rotation velocity. The limits of the flow regime in which the heat transfer is determined solely by the impact jet parameters are found. The results are compared with experimental data for the stagnation point.
Tài liệu tham khảo
N. E. Kochin, I.A. Kibel', and N.V. Roze, Theoretical Hydromechanics. V.1 [in Russian], Gostekhizdat, Moscow (1948).
H. Schlichting, Grenzschicht-Theorie, G. Braun, Carlsruhe (1965).
T. Cebeci and P. Bradshaw, Physical and Computational Aspects of Heat Transfer, Springer, New York (1984).
L. A. Dorfman, Hydrodynamic Resistance and the Heat Loss of Rotating Solids, Oliver and Boyd, Edinburgh (1963).
R. Viskanta, “Heat transfer to impinging isothermal gas and flame jets,” Experim. Thermal Fluid Sci., 6, No. 2, 111–134 (1993).
E. P. Dyban and A. I. Mazur, Convective Heat Transfer in Jet Flows past Bodies [in Russian], Naukova Dumka, Kiev (1982).
P. M. Brdlik and V.K. Savin, “Heat transfer in the stagnation-point neighborhood of axisymmetric jets impinging at right angles on plane surfaces,” Inzh. Fiz. Zh., 10, No. 4, 423–428 (1966).
I.V. Shevchuk, “Effect of the wall temperature on laminar heat transfer of a rotating disk: an approximate analytical solution,” Teplofiz. Vys. Temper., 39, No. 4, 682–685 (2001).
I.V. Shevchuk and A.A. Avramenko, “Laminar heat transfer on a rotating disk: refinement and expansion of the exact numerical solution database,” 23, No. 1–2, 11–14 (2001).
I.V. Shevchuk, “An improved enthalpy-thickness model for predicting heat transfer of a free rotating disk using an integral method,” in: Proc. ASME NHTC'2001: 35th Nat. Heat Transfer Conf., Anaheim, California, USA, 2001. Paper NHTC 2001–20195, pp.1–8.
A.N. Tifford and S. T. Chu, “On the flow and temperature fields in forced flow against a rotating disk,” in: Proc. 2nd US Nat. Congr. Appl. Mech., Ann Arbor, ASME, Michigan (1954), pp. 793–800.
N. Saniei and X. T. Yan, “An experimental study of heat transfer from a disk rotating in an infinite environment including heat transfer enhancement by jet impingement cooling,” Enhanced Heat Transfer, 7, 231–245 (2000).
N. Saniei, X. T. Yan, and W.W. Schooley, “Local heat transfer characteristics of a rotating disk under jet impingement cooling,” in: Heat Transfer: Proc. 11th Intern. Heat Transfer Conf., Kyongju, Korea. V.5., Soc. Mech. Engrs. (1998), pp. 445–450.
D. E. Metzger, R. S. Bunker, and G. Bosch, “Transient liquid crystal measurements of local heat transfer on a rotating disk with jet impingement,” Trans. ASME, J. Turbomachinery 113, No. 1, 52–59 (1991).
C.O. Popiel and L. Boguslawski, “Local heat transfer fro a rotating disk in an impinging round jet,” Trans. ASME. J. Heat Transfer, 108, No. 2, 357–364 (1986).
Th. von Karman, “Ñber laminare und turbulente Reibung,” ZAMM, Bd. 1, H.4, 233–252 (1921).
S. Broderen, D. E. Metzger, and H.J.S. Fernardo, “Flows generated by the impingement of a jet on a rotating surface. P.I. Basic flow patterns,” Trans. ASME. J. Fluids Engng., 118, No. 1, 61–67 (1996).