In vitro examination of the primary stability of three press-fit acetabular cups under consideration of two different bearing couples

Pivec, 2012, Hip arthroplasty, Lancet, 380, 1768, 10.1016/S0140-6736(12)60607-2

Learmonth, 2007, The operation of the century: total hip replacement, Lancet, 370, 1508, 10.1016/S0140-6736(07)60457-7

Makela, 2014, Failure rate of cemented and uncemented total hip replacements: register study of combined Nordic database of four nations, BMJ, 348, 10.1136/bmj.f7592

Sakellariou, 2013, Acetabular options: notes from the other side, Semin Arthroplast, 24, 76, 10.1053/j.sart.2013.07.010

Søballe, 1992, Tissue ingrowth into titanium and hydroxyapatite-coated implants during stable and unstable mechanical conditions, J Orthop Res, 10, S. 285, 10.1002/jor.1100100216

Søballe, 1992, Bone graft incorporation around titanium-alloy- and hydroxyapatite-coated implants in dogs, Clin Orthop Relat Res, S. 282

Willert, 1989, Die bedeutung von abrieb und materialermüdung bei der prothesenlockerung an der hüfte, Orthopade, 18, 350

Okano, 2002, Measurement of periprosthetic bone mineral density by dual-energy x-ray absorptiometry is useful for estimating fixation between the bone and the prosthesis in an early stage, J Arthroplast, 17, 49, 10.1054/arth.2002.28729

Bürkner, 2012, Primary stability of cementless threaded acetabular cups at first implantation and in the case of revision regarding micromotions as indicators, Biomed Tech/Biomed Eng, 57

Crosnier, 2014, A novel method to assess primary stability of press-fit acetabular cups, Proc Inst Mech Eng H, 228, 1126, 10.1177/0954411914557714

Jahnke, 2018, Effect of bearing friction torques on the primary stability of press-fit acetabular cups: a novel in vitro method, J Orthop Res, 380, 1768

von, 2015, Does osteoporosis reduce the primary tilting stability of cementless acetabular cups?, BMC Musculoskelet Disord, 16, 229

von, 2011, Führt osteoporose zu einer reduktion der primärstabilität zementfreier hüftpfannen?, Orthopade, 40, 607, 10.1007/s00132-010-1733-y

Beckmann, 2018, Comparison of the stability of three fixation techniques between porous metal acetabular components and augments, Bone Joint Res, 7, 282, 10.1302/2046-3758.74.BJR-2017-0198.R1

Beckmann, 2018, Treatment of high-grade acetabular defects: do porous titanium cups provide better stability than traditional titanium cups when combined with an augment?, J Arthroplast, 33, 1838, 10.1016/j.arth.2018.01.068

Beckmann, 2018, Comparison of the primary stability of a porous coated acetabular revision cup with a standard cup, J Arthroplast, 33, 580, 10.1016/j.arth.2017.09.023

Amirouche, 2015, Primary cup stability in THA with augmentation of acetabular defect. Comparison of healthy and osteoporotic bone, Orthop Traumatol Surg Res, 101, 667, 10.1016/j.otsr.2015.07.007

Hamadouche, 2015, Length of clinically proven cemented hip stems: state of the art or subject to improvement?, Int Orthop (SICOT), 39, 411, 10.1007/s00264-014-2522-8

Jahnke, 2018, Analysis of the elastic bending characteristics of cementless short hip stems considering the valgus alignment of the prosthetic stem, Clin Biomech, 52, 49, 10.1016/j.clinbiomech.2018.01.006

Jahnke, 2016, Influence of cerclages on primary stability of tumor megaprostheses subjected to distal femur defects, Injury, 47, 453, 10.1016/j.injury.2015.10.031

Lin, 2006, Deformation of press-fitted metallic resurfacing cups. Part 1: experimental simulation, Proc Inst Mech Eng H, 220, 299, 10.1243/095441105X69150

Ong, 2009, Biomechanical modeling of acetabular component polyethylene stresses, fracture risk, and wear rate following press-fit implantation, J Orthop Res, 27, 1467, 10.1002/jor.20918

Crosnier, 2016, The effect of dynamic hip motion on the micromotion of press-fit acetabular cups in six degrees of freedom, Med Eng Phys, 38, 717, 10.1016/j.medengphy.2016.04.014

Yew, 2006, Deformation of press-fitted metallic resurfacing cups. Part 2: finite element simulation, Proc Inst Mech Eng H, 220, 311, 10.1243/095441105X69105

Bergmann, 2001, Hip contact forces and gait patterns from routine activities, J Biomech, 34, 859, 10.1016/S0021-9290(01)00040-9

Bishop, 2013, High friction moments in large hard-on-hard hip replacement bearings in conditions of poor lubrication, J Orthop Res, 31, 807, 10.1002/jor.22255

Brockett, 2007, Friction of total hip replacements with different bearings and loading conditions, J Biomed Mater Res Part B Appl Biomater, 81, 508, 10.1002/jbm.b.30691

Pitto, 2015, Are ceramic-on-ceramic bearings in total hip arthroplasty associated with reduced revision risk for late dislocation?, Clin Orthop Relat Res, 473, 3790, 10.1007/s11999-015-4395-6

Sariali, 2010, In vitro investigation of friction under edge loading conditions for ceramic-on-ceramic total hip prosthesis, J. Orthop. Res., 28, 979, 10.1002/jor.21100

Lewinnek, 1978, Dislocations after total hip-replacement arthroplasties, J Bone Joint Surg Am, 60, 217, 10.2106/00004623-197860020-00014

Thompson, 2004, A comparison of structural and mechanical properties in cancellous bone from the femoral head and acetabulum, Proc Inst Mech Eng H, 218, 425, 10.1243/0954411042632081

Ghosh, 2013, Experimental validation of numerically predicted strain and micromotion in intact and implanted composite hemi-pelvises, Proc Inst Mech Eng H, 227, S. 162, 10.1177/0954411912461238

Damm, 2013, Friction in total hip joint prosthesis measured in vivo during walking, PLoS One, 8, e78373, 10.1371/journal.pone.0078373