Roughness of composite materials: characterization of hole quality in drilling of Al/CFRP stacks.

Sheikh-Ahmad, 2012, Cutting and Machining of Polymer Composites, Wiley Encyclopedia of Composites, 1, 648 Langella, 2005, A torque and thrust prediction model for drilling of composite materials, Composites: Part A, 36, 83, 10.1016/S1359-835X(04)00177-0 Hocheng, 2012 Teti, 2002, Machining of Composite Materials, CIRP Annals – Manufacturing Technology, 51/2, 611, 10.1016/S0007-8506(07)61703-X Zhang, 2001, A mechanical model for predicting critical thrust forces in drilling composite laminates, Proc. IMechE Part B, 215, 135, 10.1243/0954405011515235 Ramesh Babu, 2007, Effect of damage levels and curing stresses on delamination growth behaviour emanating from circular holes in laminated FRP composites, Composites Part A, 38, 2412, 10.1016/j.compositesa.2007.08.010 Abrão, 2007, Drilling of fiber reinforced plastics: A review, J. Mater. Process. Technol., 186, 1, 10.1016/j.jmatprotec.2006.11.146 Yang, 2016, Polymer-matrix composites carbon fibre characterisation and damage inspection using selectively heating thermography (SeHT) through electromagnetic induction, Comp. Struct., 140, 590, 10.1016/j.compstruct.2016.01.006 Dharan, 2000, Machining parameters for an intelligent machining system for composite laminates, Int. J. Mach. Tools Manuf., 40, 415, 10.1016/S0890-6955(99)00065-6 Caggiano, 2017, Analysis for CFRP Drilled Hole Quality Assessment, Procedia CIRP, 62, 440, 10.1016/j.procir.2017.03.045 Avdelidis, 2004, Aircraft composites assessment by means of transient thermal NDT, Progress in Aerospace Sciences, 40, 143, 10.1016/j.paerosci.2004.03.001 Gaitonde, 2012, Surface roughness analysis in high-speed drilling of unreinforced and reinforced polyamides, J Compos Mater, 46, 2659, 10.1177/0021998311431640 Kundrak, 2008, Roughness of ground and hard-turned surfaces on the basis of 3D parameters, Int J Adv Manuf Technol, 38, 110, 10.1007/s00170-007-1086-9 Hussain, 2010, Surface roughness analysis in machining of GFRP composites by carbide tool (K20), Eur J Sci Res, 41, 84 Ramesh, 2011, Surface roughness optimization of machiningparameters in machining of composite materials, Int. J. Appl. Res. Mech. Eng., 1, 26, 10.47893/IJARME.2011.1006