Pullout behavior of inclined steel fiber in an ultra-high strength cementitious matrix

Mandel, 1987, Studies of the properties of the fiber–matrix interface in steel fiber reinforced mortar, ACI Mater J, 84, 101 Stang, 1986, Failure of fiber-reinforced composites by pull-out fracture, J Mater Sci, 21, 953, 10.1007/BF01117378 Armelin, 1997, Predicting the flexural postcracking performance of steel fiber reinforced concrete from the pullout of single fibers, ACI Mater J, 94, 18 Li, 2002, Interface tailoring for strain-hardening polyvinyl alcohol-engineered cementitious composites (PVA-ECC), ACI Mater J, 99, 463 Richard, 1995, Composition of reactive powder concretes, Cement Concrete Res, 25, 1501, 10.1016/0008-8846(95)00144-2 Chanvillard, 1996, Pull-out behavior of corrugated steel fibers, Adv Cement Based Mater, 4, 28 Sujivorakul, 2000, Pull-out of a smooth fiber with an end anchorage, J Eng Mech, 126, 986, 10.1061/(ASCE)0733-9399(2000)126:9(986) Ezeldin, 1989, Bond behavior of normal and high-strength fiber reinforced concrete, ACI Mater J, 86, 515 Shannag, 1996, Interfacial (fiber–matrix) properties of high-strength mortar (150MPa) from fiber pullout, ACI Mater J, 93, 1 Shannag, 1997, Pullout behavior of steel fibers from cement-based composites, Cement Concrete Res, 27, 925, 10.1016/S0008-8846(97)00061-6 Orange G, Acker P, Vernet C. A new generation of UHP concrete: ductal damage resistance and micromechanical analysis. In: Third international workshop on high performance fiber reinforced cement composites (HPFRCC3), Mainz, Germany; 1999. p. 101–11. Morton, 1974, The cracking of composites consisting of discontinuous reinforced concrete, J Mater Sci, 9, 1436, 10.1007/BF00552929 Bartos, 1981, Review paper: bond in fibre reinforced cements and concretes, Int J Cement Compos Lightweight Concr, 3, 159, 10.1016/0262-5075(81)90049-X Li, 1990, Effect of inclining angle, bundling and surface treatment on synthetic fiber pull-out from a cement matrix, Composites, 21, 132, 10.1016/0010-4361(90)90005-H Wang, 1988, Analysis of synthetic fiber pullout from a cement matrix, 159 Stang, 1995, Design and structural applications of stress–crack width relations in fiber reinforced concrete, Mater Struct, 28, 210, 10.1007/BF02473251 Lin, 1999, On interface property characterization and performance of fiber-reinforced cementitious composites, Concrete Sci Eng, 1, 173 Nammur, 1989, A bond stress model for fiber reinforced concrete based on bond stress slip relationship, ACI Mater J, 86, 45 Naaman, 1991, Fiber pullout and bond slip I: analytical study, J Struct Eng, 117, 2769, 10.1061/(ASCE)0733-9445(1991)117:9(2769) Naaman, 1991, Fiber pullout and bond slip II: experimental validation, J Struct Eng, 117, 2791, 10.1061/(ASCE)0733-9445(1991)117:9(2791) Alwan, 1999, Effect of mechanical clamping on the pull-out response of hooked steel fibers embedded in cementitious matrices, Concrete Sci Eng, 1, 15 Chanvillard, 1999, Modeling the pullout of wire-drawn steel fibers, Cement Concrete Res, 29, 1027, 10.1016/S0008-8846(99)00081-2 Leung, 1992, Effect of fiber inclination on crack bridging stress in brittle fiber reinforced brittle matrix composites, J Mech Phys Solids, 40, 1333, 10.1016/0022-5096(92)90018-W Fantilli, 2007, A cohesive interface model for the pullout of inclined steel fibers in cementitious matrixes, J Adv Concrete Technol, 5, 247, 10.3151/jact.5.247 Gray, 1983, Experimental techniques for measuring fibre/matrix interfacial bond shear strength, 3 Chan, 2004, Effect of silica fume on steel fiber bond characteristics in reactive powder concrete, Cement Concrete Res, 34, 1167, 10.1016/j.cemconres.2003.12.023 Pallett P, Gorst N, Clark L, Thomas D. Friction resistance in temporary works materials. Concrete 2002; 36(6): 12, 14 & 15. Morton, 1976, The effect of metal wires on the fracture of a brittle matrix composites, J Mater Sci, 11, 617, 10.1007/BF01209446 Kanda, 1998, Interface property and apparent strength of a high strength hydrophilic fiber in cement matrix, ASCE J Mater Civ Eng, 10, 5, 10.1061/(ASCE)0899-1561(1998)10:1(5) Leung, 1997, Pullout of inclined flexible fiber in cementitious composite, J Eng Mech, 123, 239, 10.1061/(ASCE)0733-9399(1997)123:3(239) Leung, 1995, Crack-bridging force in random ductile fiber brittle matrix composites, J Eng Mech, 121, 1315, 10.1061/(ASCE)0733-9399(1995)121:12(1315)