On microfluidic solvent extraction of uranium

Rebrov, 2001, Design of a microstructured reactor with integrated heat-exchanger for optimum performance of a highly exothermic reaction, Catal. Today, 69, 183, 10.1016/S0920-5861(01)00368-6 Schneider, 2004, A microreactor-based system for the study of fast exothermic reactions in liquid phase: characterization of the system, Chem. Eng. J., 101, 241, 10.1016/j.cej.2003.11.005 Waterkemp, 2007, Synthesis of ionic-liquids in micro-reactors—a process intensification study, Green Chem., 9, 1084, 10.1039/b616882e Sen, 2013, Continuous, solvent free, high temperature synthesis of ionic liquid 1-butyl-3-methylimidazolium bromide in a microreactor, BARC Newsl., 334, 20 Sen, 2016, On continuous, solvent-free synthesis of ionic liquid [BMIM]Br in a microbore tube, J. Radioanal. Nucl. Chem., 307, 1001, 10.1007/s10967-015-4278-z Veser, 2001, Experimental and theoretical investigation of H2 oxidation in a high-temperature catalytic microreactor, Chem. Eng. Sci., 56, 1265, 10.1016/S0009-2509(00)00348-1 Zhang, 2004, Application of microreactor technology in process development, Org. Process Res. Dev., 8, 455, 10.1021/op034193x Acke, 2007, A HCN-based reaction under microreactor conditions: industrially feasible and continuous synthesis of 3, 4-diamino-1H-isochromen-1-ones, Green Chem., 9, 386, 10.1039/b615186h Voloshin, 2007, Kinetics of hydrogen peroxide synthesis by direct combination of H2 and O2 in a microreactor, Catal. Today, 125, 40, 10.1016/j.cattod.2007.01.043 Brandt, 2009, Controlling hazardous chemical in microreactors: synthesis with iodine azide, Beilstein J. Org. Chem., 5, 30 Inoue, 2013, Direct synthesis of hydrogen peroxide based on microreactor technology, Fuel Process. Technol., 108, 8, 10.1016/j.fuproc.2012.04.009 Tonkovich, 2005, Microchannel technology scale-up to commercial capacity, Chem. Eng. Res. Des., 83, 634, 10.1205/cherd.04354 Al-Rawashdeh, 2012, Design criteria for a barrier-based gas–liquid flow distributor for parallel microchannels, Chem. Eng. J., 181–182, 549, 10.1016/j.cej.2011.11.086 Al-Rawashdeh, 2012, Numbered-up gas–liquid micro/milli channels reactor with modular flow distributor, Chem. Eng. J., 207–208, 645, 10.1016/j.cej.2012.07.028 Darekar, 2014, Extraction of uranium from dilute solutions using microbore tubes, BARC Newsl., 338, 9 Darekar, 2016, Single-stage micro-scale extraction: studies with single microbore tubes and scale-up, Sep. Purif. Technol., 158, 160, 10.1016/j.seppur.2015.11.041 Krea, 2000, Liquid–liquid extraction of uranium and lanthanides from phosphoric acid using a synergistic DOPPA–TOPO mixture, Hydrometallurgy, 58, 215, 10.1016/S0304-386X(00)00129-8 Singh, 2001, Studies on uranium extraction from phosphoric acid using di-nonyl phenyl phosphoric acid-based synergistic mixtures, Hydrometallurgy, 59, 69, 10.1016/S0304-386X(00)00145-6 Kulkarni, 2002, Studies on membrane stability and recovery of uranium (VI) from aqueous solutions using a liquid emulsion membrane process, Hydrometallurgy, 64, 49, 10.1016/S0304-386X(02)00006-3 Singh, 2004, Uranium recovery from phosphoric acid by solvent extraction using a synergistic mixture of di-nonyl phenyl phosphoric acid and tri-n-butyl phosphate, Hydrometallurgy, 73, 63, 10.1016/j.hydromet.2003.08.006 Benz, 2001, Utilization of micromixers for extraction processes, Chem. Eng. Technol., 24, 11, 10.1002/1521-4125(200101)24:1<11::AID-CEAT11>3.0.CO;2-Q Zhao, 2007, Liquid-liquid two-phase mass transfer in the T-junction microchannels, AIChE J., 53, 3042, 10.1002/aic.11333 Ji, 2010, Experimental investigation on liquid volumetric mass transfer coefficient for upward gas-liquid two phase flow in rectangular microchannels, Braz. J. Chem. Eng., 27, 573, 10.1590/S0104-66322010000400009 Su, 2010, Liquid–liquid two-phase flow and mass transfer characteristics in packed microchannels, Chem. Eng. Sci., 65, 3947, 10.1016/j.ces.2010.03.034 Kashid, 2011, Gas-liquid and liquid-liquid mass transfer in microstructured reactors, Chem. Eng. Sci., 66, 3876, 10.1016/j.ces.2011.05.015 Darekar, 2014, Liquid–liquid extraction in microchannels with Zinc–D2EHPA system, Hydrometallurgy, 144, 54, 10.1016/j.hydromet.2014.01.010 Darekar, 2014, Solvent extraction in microbore tubes with UNPS-TBP in dodecane system, Sep. Purif. Technol., 128, 96, 10.1016/j.seppur.2014.03.002 Sen, 2014, Solvent extraction and stripping studies in microchannels with TBP nitric acid system, Solvent Extr. Ion Exch., 32, 281, 10.1080/07366299.2013.850290 Zhu, 2014, Taylor flow and mass transfer of CO2 chemical absorption into MEA aqueous solutions in a T-junction microchannel, Int. J. Heat Mass Transf., 73, 492, 10.1016/j.ijheatmasstransfer.2014.02.040 Yin, 2018, Study of mass transfer behavior of extracting La(III) with EHEHPA (P507) using rectangular cross-section microchannel, Hydrometallury, 175, 64, 10.1016/j.hydromet.2017.10.027 Saito, 2005, Preparation characteristics of monodispersed oil-in-water emulsions with large particles stabilized by proteins in straight-through microchannel emulsification, Food Hydrocoll., 19, 745, 10.1016/j.foodhyd.2004.08.005 Sugiura, 2001, Preparation characteristics of monodispersed water-in-oil emulsions using microchannel emulsification, J. Chem. Eng. J., 34, 757, 10.1252/jcej.34.757 Zhao, 2006, Liquid-liquid two-phase flow patterns in a rectangular microchannel, AIChE J., 52, 4052, 10.1002/aic.11029 Kashid, 2007, Hydrodynamics of liquid-liquid slug flow capillary microreactor: flow regimes, slug size and pressure drop, Chem. Eng. J., 131, 1, 10.1016/j.cej.2006.11.020 Salim, 2008, Oil-water two-phase flow in microchannels: flow patterns and pressure drop measurements, Can. J. Chem. Eng., 86, 978, 10.1002/cjce.20108 Cherlo, 2010, Experimental and numerical investigations of two-phase (liquid–liquid) flow behavior in rectangular microchannels, Ind. Eng. Chem. Res., 49, 893, 10.1021/ie900555e Sarkar, 2012, Liquid–liquid two-phase flow patterns in a serpentine microchannel, Ind. Eng. Chem. Res., 51, 5056, 10.1021/ie201590f Fu, 2015, Flow patterns of liquid–liquid two-phase flow in non-Newtonian fluids in rectangular microchannels, Chem. Eng. Process. Process. Intensif., 91, 114, 10.1016/j.cep.2015.03.020 Darekar, 2017, Liquid–liquid two-phase flow patterns in Y-junction microchannels, Ind. Eng. Chem. Res., 56, 12215, 10.1021/acs.iecr.7b03164 Dessimoz, 2008, Liquid liquid two-phase flow patterns and mass transfer characteristics in rectangular glass microreactors, Chem. Eng. Sci., 63, 4035, 10.1016/j.ces.2008.05.005 Zhao, 2010, Effect of surface properties on the flow characteristics and mass transfer performance in microchannels, Chem. Eng. Sci., 65, 1563, 10.1016/j.ces.2009.10.027 Kashid, 2011, Influence of flow regime on mass transfer in different types of microchannels, Ind. Eng. Chem. Res., 50, 6906, 10.1021/ie102200j Darekar, 2017, Single-stage micro-scale solvent extraction in parallel microbore tubes using monoblock distributor with integrated microfluidic junctions, Sep. Sci. Technol., 52, 2213, 10.1080/01496395.2017.1279181 Hotokezaka, 2005, Development of the innovative nuclide separation system for high-level radioactive waste using microchannel chip-extraction behavior of metal ions from aqueous phase to organic phase in microchannel, Prog. Nucl. Energy, 47, 439, 10.1016/j.pnucene.2005.05.045 Tsaoulidis, 2013, Dioxouranium(VI) extraction in microchannels using ionic liquids, Chem. Eng. J., 227, 151, 10.1016/j.cej.2012.08.064 Zhang, 2013, Solvent extraction of uranium by Laminar flow in microfluidic chips, Adv. Mater. Res., 709, 485, 10.4028/www.scientific.net/AMR.709.485 Tsaoulidis, 2013, Extraction of dioxouranium (VI) in small channels using ionic liquids, Chem. Eng. Res. Des., 91, 681, 10.1016/j.cherd.2013.01.008 Mohan, 2010, Mass transfer correlation development for the presence of entry region coil as swirl promoter in tube, Int. J. Therm. Sci., 49, 356, 10.1016/j.ijthermalsci.2009.06.010 Wu, 2014, Magnesium based metal hydride reactor incorporating helical coil heat exchanger: simulation study and optimal design, Appl. Energy, 130, 712, 10.1016/j.apenergy.2013.12.071 Moulin, 1996, Mass transfer improvement by secondary flows: dean vortices in coiled tubular membranes, J. Membr. Sci., 114, 235, 10.1016/0376-7388(95)00323-1 Prabhanjan, 2002, Comparison of heat transfer rates between a straight tube heat exchanger and a helically coiled heat exchanger, Int. Commun. Heat Mass Transf., 29, 185, 10.1016/S0735-1933(02)00309-3 Naphon, 2006, A review of flow and heat transfer characteristics in curved tubes, Renew. Sustain. Energy Rev., 10, 463, 10.1016/j.rser.2004.09.014 Naphon, 2007, Thermal performance and pressure drop of the helical-coil heat exchangers with and without helically crimped fins, Int. Commun. Heat Mass Transf., 34, 321, 10.1016/j.icheatmasstransfer.2006.11.009 Jiang, 2004, Helical flows and chaotic mixing in curved micro channels, AIChE J., 50, 2297, 10.1002/aic.10188 Shin, 2009, Recovery of nitric acid from waste etching solution using solvent extraction, J. Hazard. Mater., 163, 729, 10.1016/j.jhazmat.2008.07.019