Determining link parameters using genetic algorithm in mechanisms with joint clearance

Ting, 2000, The effects of joint clearance on position and orientation deviation of linkages and manipulators, Mechanism and Machine Theory, 35, 391, 10.1016/S0094-114X(99)00019-1 Tsai, 2004, Kinematic sensitivity analysis of linkage with joint clearance based on transmission quality, Mechanism and Machine Theory, 39, 1189, 10.1016/j.mechmachtheory.2004.05.009 Shi, 2005, Robust synthesis of path generating linkages, Mechanism and Machine Theory, 40, 45, 10.1016/j.mechmachtheory.2004.05.008 Cabrera, 2002, Optimal synthesis of mechanisms with genetic algorithms, Mechanism and Machine Theory, 37, 1165, 10.1016/S0094-114X(02)00051-4 Kunjur, 1997, Genetic algorithms in mechanism synthesis, Journal of Applied Mechanisms and Robotics, 4, 18 Furuhashi, 1978, Research on dynamics of four-bar linkage with clearances at turning pairs (1st Report, General theory of continuous contact model), Bulletin of the JSME, 21, 518, 10.1299/jsme1958.21.518 Morita, 1978, Research on dynamics of four-bar linkage with clearances at turning pairs (2nd Report, Analysis of crank-level mechanism with clearance at joint of crank and coupler using continuous contact model), Bulletin of the JSME, 21, 1284, 10.1299/jsme1958.21.1284 Bengisu, 1986, A theoretical and experimental investigation of contact loss in the clearances of a four-bar mechanism, Transactions of the ASME – Journal of Mechanisms, Transmissions, and Automation in Design, 108, 237, 10.1115/1.3260808 Marin, 2003, Global optimization in path synthesis based on design space reduction, Mechanism and Machine Theory, 38, 579, 10.1016/S0094-114X(03)00010-7 Balli, 2002, Transmission angle in mechanisms (Triangle in mech), Mechanism and Machine Theory, 37, 175, 10.1016/S0094-114X(01)00067-2 Feng, 2002, A new optimization method for dynamic design of planar linkage with clearances at joints-optimizing the mass distribution of links to reduce the change of joint forces, Transactions of the ASME – Journal of Mechanical Design, 124, 68, 10.1115/1.1425393 MSC.ADAMS 2005 r2, Automatic Dynamic Analysis of Mechanical Systems, MSC Software Corporation.