Optimization of solar photovoltaic system integrated with phase change material

Aelenei, 2014, Thermal performance of a hybrid BIPV-PCM: modeling, design and experimental investigation, Energy Proc., 48, 474, 10.1016/j.egypro.2014.02.056 Atkin, 2015, Improving the efficiency of photovoltaic cells using PCM infused graphite and aluminium fins, Sol. Energy, 114, 217, 10.1016/j.solener.2015.01.037 Biwole, 2013, Phase-change materials to improve solar panel’s performance, Energy Build., 62, 59, 10.1016/j.enbuild.2013.02.059 Brano, 2014, Finite difference thermal model of a latent heat storage system coupled with a photovoltaic device: description and experimental validation, Renew. Energy, 68, 181, 10.1016/j.renene.2014.01.043 Browne, 2015, Phase change materials for photovoltaic thermal management, Renew. Sustain. Energy Rev., 47, 762, 10.1016/j.rser.2015.03.050 Browne, 2015, Indoor characterisation of a photovoltaic/ thermal phase change material system, Energy Proc., 70, 163, 10.1016/j.egypro.2015.02.112 Browne, 2016, Assessing the thermal performance of phase change material in a photovoltaic/thermal system, Energy Proc., 91, 113, 10.1016/j.egypro.2016.06.184 Du, 2013, Thermal management systems for Photovoltaics (PV) installations: a critical review, Sol. Energy, 97, 238, 10.1016/j.solener.2013.08.018 Elarga, 2016, Thermal and electrical performance of an integrated PV-PCM system in double skin façades: a numerical study, Sol. Energy, 136, 112, 10.1016/j.solener.2016.06.074 Emam, 2017, Performance study and analysis of an inclined concentrated photovoltaic-phase change material system, Sol. Energy, 150, 229, 10.1016/j.solener.2017.04.050 Hasan, 2010, Evaluation of phase change materials for thermal regulation enhancement of building integrated photovoltaics, Sol. Energy, 84, 1601, 10.1016/j.solener.2010.06.010 Hasan, 2015, Increased photovoltaic performance through temperature regulation by phase change materials: materials comparison in different climates, Sol. Energy, 115, 264, 10.1016/j.solener.2015.02.003 Ho, 2012, Thermal and electrical performance of a BIPV integrated with a microencapsulated phase change material layer, Energy Build., 50, 331, 10.1016/j.enbuild.2012.04.003 Ho, 2014, Application of a water-saturated MEPCM-PV for reducing winter chilling damage on aqua farms, Sol. Energy, 108, 135, 10.1016/j.solener.2014.07.006 Ho, 2015, Thermal and electrical performance of a water-surface floating PV integrated with a water-saturated MEPCM layer, Energy Convers. Manage., 89, 862, 10.1016/j.enconman.2014.10.039 Huang, 2011, The effect of using two PCMs on the thermal regulation performance of BIPV systems, Sol. Energy Mater. Sol. Cells, 95, 957, 10.1016/j.solmat.2010.11.032 Huang, 2004, Thermal regulation of building-integrated photovoltaics using phase change materials, Int. J. Heat Mass Transf., 47, 2715, 10.1016/j.ijheatmasstransfer.2003.11.015 Huang, 2006, Phase change materials for limiting temperature rise in building integrated photovoltaics, Sol. Energy, 80, 1121, 10.1016/j.solener.2005.10.006 Huang, 2006, Comparison of a small-scale 3D PCM thermal control model with a validated 2D PCM thermal control model, Sol. Energy Mater. Sol. Cells, 90, 1961, 10.1016/j.solmat.2006.02.001 Huang, 2007, Comparison of predictions made using a new 3D phase change material thermal control model with experimental measurements and predictions made using a validated 2D model, Heat Transfer Eng., 28, 31, 10.1080/01457630600985634 Huang, 2011, Natural convection in an internally finned phase change material heat sink for the thermal management of photovoltaics, Sol. Energy Mater. Sol. Cells, 95, 1598, 10.1016/j.solmat.2011.01.008 Indartono, 2014, Improving photovoltaics performance by using yellow petroleum jelly as phase change material, Int. J. Low-Carbon Technol., 1 Kant, 2016, Heat transfer studies of photovoltaic panel coupled with phase change material, Sol. Energy, 140, 151, 10.1016/j.solener.2016.11.006 Kaplani, 2014, Thermal modelling and experimental assessment of the dependence of PV module temperature on wind velocity and direction, module orientation and inclination, Sol. Energy, 107, 443, 10.1016/j.solener.2014.05.037 Khanna, 2017, Performance analysis of perovskite and dye-sensitized solar cells under varying operating conditions and comparison with monocrystalline silicon cell, Appl. Therm. Eng., 127, 559, 10.1016/j.applthermaleng.2017.08.030 Khanna, 2017, Performance analysis of tilted photovoltaic system integrated with phase change material, Energy, 133, 887, 10.1016/j.energy.2017.05.150 Kibria, 2016, Development of a thermal model for a hybrid photovoltaic module and phase change materials storage integrated in buildings, Sol. Energy, 124, 114, 10.1016/j.solener.2015.11.027 Ma, 2015, Using phase change materials in photovoltaic systems for thermal regulation and electrical efficiency improvement: a review and outlook, Renew. Sustain. Energy Rev., 43, 1273, 10.1016/j.rser.2014.12.003 Mahamudul, 2016, Temperature regulation of photovoltaic module using phase change material: a numerical analysis and experimental investigation, Int. J. Photoenergy, 5917028, 1, 10.1155/2016/5917028 Park, 2014, Application of a phase-change material to improve the electrical performance of vertical-building-added photovoltaics considering the annual weather conditions, Sol. Energy, 105, 561, 10.1016/j.solener.2014.04.020 Rubitherm Phase Change Material <https://www.rubitherm.eu/> (accessed 20.07.2017). Sharma, 2016, Performance enhancement of a building-integrated concentrating photovoltaic system using phase change material, Sol. Energy Mater. Sol. Cells, 149, 29, 10.1016/j.solmat.2015.12.035 Shukla, 2017, Cooling methodologies of photovoltaic module for enhancing electrical efficiency: a review, Sol. Energy Mater. Sol. Cells, 160, 275, 10.1016/j.solmat.2016.10.047 Smith, 2014, Global analysis of photovoltaic energy output enhanced by phase change material cooling, Appl. Energy, 126, 21, 10.1016/j.apenergy.2014.03.083