Field synergy analysis for enhancing heat transfer capability of a novel narrow-tube closed oscillating heat pipe

Applied Energy - Tập 175 - Trang 218-228 - 2016
E. Jiaqiang1,2,3, Xiaohuan Zhao1,2,3, Haili Liu1,2,3, Jianmei Chen4, Wei Zuo1,2,3, Qingguo Peng1,2,3
1State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha 410082, China
2College of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, China
3Institute of the New Energy and Energy-saving & Emission-reduction Technology, Hunan University, Changsha 410082, China
4Research Center of Engineering Technology for Engineering Vehicle Chassis Manufacturing in Hunan Province, Changsha 410205, China

Tài liệu tham khảo

Weng, 2011, Heat pipe with PCM for electronic cooling, Appl Energy, 88, 1825, 10.1016/j.apenergy.2010.12.004 Rittidech, 2005, Closed–ended oscillating heat–pipe (CEOHP) air–preheater for energy thrift in a dryer, Appl Energy, 81, 198, 10.1016/j.apenergy.2004.06.003 Meena, 2007, Closed–loop oscillating heat–pipe with check valves (CLOHP/CVs) air–preheater for reducing relative humidity in drying systems, Appl Energy, 84, 363, 10.1016/j.apenergy.2006.09.009 Wannapakhe, 2012, Hot air dryer with closed-loop oscillating heat pipe with check valves for reducing energy in drying process, Procedia Eng, 32, 77, 10.1016/j.proeng.2012.01.1239 Rittidech, 2007, Experimental study of the performance of a solar collector by closed–end oscillating heat pipe (CEOHP), Appl Therm Eng, 27, 1978, 10.1016/j.applthermaleng.2006.12.005 He, 2015, Operational performance of a novel heat pump assisted solar facade loop–heat–pipe water heating system, Appl Energy, 146, 371, 10.1016/j.apenergy.2015.01.096 Mangini, 2015, A pulsating heat pipe for space applications: ground and microgravity experiments, Int J Therm Sci, 95, 53, 10.1016/j.ijthermalsci.2015.04.001 Senjaya, 2014, Effects of non-condensable gas on the performance of oscillating heat pipe, part I: Theoretical study, Appl Therm Eng, 73, 1387, 10.1016/j.applthermaleng.2014.02.074 Saad, 2012, The transient response of wicked heat pipes with on–condensable gas, Appl Therm Eng, 37, 403, 10.1016/j.applthermaleng.2011.11.058 Du, 2012, Simulation model of a greenhouse with a heat–pipe heating system, Appl Energy, 93, 268, 10.1016/j.apenergy.2011.12.069 Kostornov, 2015, Composite structures with gradient of permeability to be used in heat pipes under microgravity, Acta Astronaut, 115, 52, 10.1016/j.actaastro.2015.04.022 Akachi, 1996, Pulsating heat pipes, 208 Yan, 2013, Research, development and innovations for sustainable future energy systems, Appl Energy, 112, 393, 10.1016/j.apenergy.2013.08.019 Yan, 2014, Innovative and sustainable solutions of clean energy technologies and policies (Part I), Appl Energy, 130, 447, 10.1016/j.apenergy.2014.05.052 Yan, 2014, Innovative and sustainable solutions of clean energy technologies and policies (Part II), Appl Energy, 136, 10.1016/j.apenergy.2014.09.078 Chou, 2004, On the study of an energy-efficient greenhouse for heating, cooling and dehumidification applications, Appl Energy, 77, 355, 10.1016/S0306-2619(03)00157-0 Chou, 2010, Porous media combustion for micro thermophotovoltaic system applications, Appl Energy, 87, 2862, 10.1016/j.apenergy.2009.06.039 Yang, 2013, Impact of emulsion fuel with nano-organic additives on the performance of diesel engine, Appl Energy, 112, 1206, 10.1016/j.apenergy.2013.02.027 Marcinichen, 2014, Dynamic flow control and performance comparison of different concepts of two-phase on-chip cooling cycles, Appl Energy, 114, 179, 10.1016/j.apenergy.2013.09.018 Markides, 2014, Working fluid selection for a two-phase thermofluidic oscillator: effect of thermodynamic properties, Appl Energy, 124, 167, 10.1016/j.apenergy.2014.02.042 Jouhara, 2013, Thermal performance characteristics of a wraparound loop heat pipe (WLHP) charged with R134A, Energy, 61, 128, 10.1016/j.energy.2012.10.016 Solomon, 2014, Numerical analysis of a screen mesh wick heat pipe with Cu/water nanofluid, Int J Heat Mass Transf, 75, 523, 10.1016/j.ijheatmasstransfer.2014.04.007 Qu, 2011, Thermal performance comparison of oscillating heat pipes with SiO2/water and Al2O3/water nanofluids, Int J Therm Sci, 50, 1954, 10.1016/j.ijthermalsci.2011.04.004 Mameli, 2014, Thermal response of a closed loop pulsating heat pipe under a varying gravity force, Int J Therm Sci, 80, 11, 10.1016/j.ijthermalsci.2014.01.023 Nine, 2014, Analysis of pressure fluctuations to evaluate thermal performance of oscillating heat pipe, Energy, 70, 135, 10.1016/j.energy.2014.03.098 Rittidech, 2013, Heat–transfer characteristics of a closed-loop oscillating heat–pipe with check valves, Appl Energy, 103, 400 Bhuwakietkumjohn, 2010, Internal flow patterns on heat transfer characteristics of a closed–loop oscillating heat–pipe with check valves using ethanol and a silver nano–ethanol mixture, Exp Thermal Fluid Sci, 34, 1000, 10.1016/j.expthermflusci.2010.03.003 Meena, 2007, Application of closed–loop oscillating heat–pipe with check valves (CLOHP/CV) air–preheater for reduced relative–humidity in drying systems, Appl Energy, 84, 553, 10.1016/j.apenergy.2006.09.006 Xiong, 2013, Development of a generalized numerical frame work for simulating biomass fast pyrolysisin fluidized–bed reactors, Chem Eng Sci, 99, 305, 10.1016/j.ces.2013.06.017 Xiong, 2014, BIOTC: An open–source CFD code for simulating biomass fast pyrolysis, Comput Phys Commun, 185, 1739, 10.1016/j.cpc.2014.02.012 Xiong, 2014, Modeling effects of interphase transport coefficients on biomass pyrolysis in fluidized beds, Powder Technol, 262, 96, 10.1016/j.powtec.2014.04.062 Wang, 2010, Numerical investigation of gas–to–particle cluster convective heat transfer in circulating fluidized beds, Int J Heat Mass Transf, 53, 3102, 10.1016/j.ijheatmasstransfer.2010.03.017 Wang, 2010, Hydrodynamic simulations of gas–solid spouted bed with a draft tube, Chem Eng Sci, 65, 1322, 10.1016/j.ces.2009.09.060 Wang, 2015, Numerical simulation of horizontal jet penetration using filtered fluid model in gas–solid fluidized bed, Powder Technol, 276, 1, 10.1016/j.powtec.2015.02.009 Zhao, 2015, Numerical investigation of the effect of distributed heat sources on heat-to-sound conversion in a T-shaped thermoacoustic system, Appl Energy, 144, 204, 10.1016/j.apenergy.2015.01.091 Zhao, 2014, Thermodynamic measurement and analysis of dual–temperature thermoacoustic oscillations for energy harvesting application, Energy, 65, 517, 10.1016/j.energy.2013.10.078 Mamelia, 2012, Numerical model of a multi–turn Closed Loop Pulsating Heat Pipe: effects of the local pressure losses due to meanderings, Int J Heat Mass Transf, 55, 1036, 10.1016/j.ijheatmasstransfer.2011.10.006 E, 2016, Pressure distribution and flow characteristics of closed oscillating heat pipe during the starting process at different vacuum degrees, Appl Therm Eng, 93, 166, 10.1016/j.applthermaleng.2015.09.060 Guo, 2005, The field synergy (coordination) principle and its applications in enhancing single phase convective heat transfer, Int J Heat Mass Transf, 48, 1797, 10.1016/j.ijheatmasstransfer.2004.11.007 Habchi, 2011, Entropy production and field synergy principle in turbulent vortical flows, Int J Therm Sci, 50, 2365, 10.1016/j.ijthermalsci.2011.07.012 E, 2016, Field synergy analysis of the micro–cylindrical combustor with a step, Appl Therm Eng, 93, 83, 10.1016/j.applthermaleng.2015.09.028 Li, 2015, Field synergy principle analysis for reducing natural convection heat loss of a solar cavity receiver, Renewable Energy, 75, 257, 10.1016/j.renene.2014.09.055 He, 2005, Three–dimensional numerical study of heat transfer characteristics of plain plate fin–and–tube heat exchangers from view point of field synergy principle, Int J Heat Fluid Flow, 26, 459, 10.1016/j.ijheatfluidflow.2004.11.003 He, 2014, Numerical studies on the inherent interrelationship between field synergy principle and entransy dissipation extreme principle for enhancing convective heat transfer, Int J Heat Mass Transf, 74, 196, 10.1016/j.ijheatmasstransfer.2014.03.013 Tao, 2002, Field synergy principle for enhancing convective heat transfer–its extension and numerical verifications, Int J Heat Mass Transf, 45, 3849, 10.1016/S0017-9310(02)00097-2 Tao, 2002, A unified analysis on enhancing single phase convective heat transfer with field synergy principle, Int J Heat Mass Transf, 45, 4871, 10.1016/S0017-9310(02)00173-4 Guo, 1998, A novel concept for convective heat transfer enhancement, Int J Heat Mass Transf, 41, 2221, 10.1016/S0017-9310(97)00272-X Tanshen, 2013, Effect of functionalized MWCNTs/water nanofluids on thermal resistance and pressure fluctuation characteristics in oscillating heat pipe, Int Commun Heat Mass Transfer, 48, 93, 10.1016/j.icheatmasstransfer.2013.08.011 Qu, 2013, Experimental study on the thermal performance of vertical closed-loop oscillating heat pipes and correlation modeling, Appl Energy, 112, 1154, 10.1016/j.apenergy.2013.02.030 Chung, 2013, Experimental study on the hydrogen charge and discharge rates of metal hydride tanks using heat pipes to enhance heat transfer, Appl Energy, 103, 581, 10.1016/j.apenergy.2012.10.024 Akansu, 2006, Heat transfers and pressure drops for porous-ring turbulators in a circular pipe, Appl Energy, 83, 280, 10.1016/j.apenergy.2005.02.003 Colorado-Garrido, 2009, Heat transfer of a helical double-pipe vertical evaporator: theoretical analysis and experimental validation, Appl Energy, 86, 1144, 10.1016/j.apenergy.2008.08.015 Ji, 2015, Summary and evaluation on single-phase heat transfer enhancement techniques of liquid laminar and turbulent pipe flow, Int J Heat Mass Transf, 88, 735, 10.1016/j.ijheatmasstransfer.2015.04.008 Yu, 2013, Study on flow and heat transfer characteristics of composite porous material and its performance analysis by FSP and EDEP, Appl Energy, 112, 1367, 10.1016/j.apenergy.2013.02.054