Investigation of energy conversion and flame stability in a curved micro-combustor for thermo-photovoltaic (TPV) applications

Applied Energy - Tập 192 - Trang 134-145 - 2017
Saad Akhtar1,2, Mohammed N. Khan1, Jundika C. Kurnia3, Tariq Shamim1
1Institute Center for Energy (iEnergy), Department of Mechanical and Materials Engineering, Masdar Institute of Science and Technology, Masdar City, Abu Dhabi, United Arab Emirates
2Department of Mining and Materials Engineering, McGill University, 3450 University Street, Montreal, QC H3A0E8, Canada
3Department of Mechanical Engineering, Universiti Teknologi PETRONAS, 32610 Bandar Seri Iskandar, Perak Darul Ridzuan, Malaysia

Tài liệu tham khảo

Turns, 1996 Glassman I, Yetter RA, Glumac NG. Combustion. Academic Press; 2014. Yang, 2002, Development of microthermophotovoltaic system, Appl Phys Lett, 81, 5255, 10.1063/1.1533847 Wan, 2012, Experimental and numerical investigation on combustion characteristics of premixed hydrogen/air flame in a micro-combustor with a bluff body, Int J Hydrogen Energy, 37, 19190, 10.1016/j.ijhydene.2012.09.154 Wan, 2015, Experimental investigation and numerical analysis on flame stabilization of CH4/air mixture in a mesoscale channel with wall cavities, Combust Flame, 162, 1035, 10.1016/j.combustflame.2014.09.024 Liu, 2016, Experimental and numerical investigations on flame stability of methane/air mixtures in mesoscale combustors filled with fibrous porous media, Energy Convers Manage, 123, 402, 10.1016/j.enconman.2016.06.058 Zhao, 2015, Mitigation of premixed flame-sustained thermoacoustic oscillations using an electrical heater, Int J Heat Mass Transf, 86, 309, 10.1016/j.ijheatmasstransfer.2015.03.012 Zhao, 2015, Numerical investigation of the effect of distributed heat sources on heat-to-sound conversion in a T-shaped thermoacoustic system, Appl Energy, 144, 204, 10.1016/j.apenergy.2015.01.091 Akhtar, 2015, A three-dimensional computational model of H2–air premixed combustion in non-circular micro-channels for a thermo-photovoltaic (TPV) application, Appl Energy, 152, 47, 10.1016/j.apenergy.2015.04.068 Taywade, 2013, Thermal performance of a micro combustor with heat recirculation, Fuel Process Technol, 109, 179, 10.1016/j.fuproc.2012.11.002 Wierzbicki, 2014, Combustion of propane with Pt and Rh catalysts in a meso-scale heat recirculating combustor, Appl Energy, 130, 350, 10.1016/j.apenergy.2014.05.069 Wierzbicki, 2015, Rh assisted catalytic oxidation of jet fuel surrogates in a meso-scale combustor, Appl Energy, 145, 1, 10.1016/j.apenergy.2015.01.097 Shirsat, 2011, Performance characteristics of methanol and kerosene fuelled meso-scale heat-recirculating combustors, Appl Energy, 88, 5069, 10.1016/j.apenergy.2011.07.019 Shirsat, 2011, A review of progress in heat recirculating meso-scale combustors, Appl Energy, 88, 4294, 10.1016/j.apenergy.2011.07.021 Vijayan, 2011, Thermal performance of a meso-scale liquid-fuel combustor, Appl Energy, 88, 2335, 10.1016/j.apenergy.2011.01.012 Wan, 2015, Effect of thermal conductivity of solid wall on combustion efficiency of a micro-combustor with cavities, Energy Convers Manage, 96, 605, 10.1016/j.enconman.2015.03.030 Chou, 2010, Porous media combustion for micro thermophotovoltaic system applications, Appl Energy, 87, 2862, 10.1016/j.apenergy.2009.06.039 Pan, 2015, Hydrogen/oxygen premixed combustion characteristics in micro porous media combustor, Appl Energy, 160, 802, 10.1016/j.apenergy.2014.12.049 Yang, 2012, An advanced micro modular combustor-radiator with heat recuperation for micro-TPV system application, Appl Energy, 97, 749, 10.1016/j.apenergy.2011.12.024 Zuo, 2016, Numerical investigations on an improved micro-cylindrical combustor with rectangular rib for enhancing heat transfer, Appl Energy, 184, 77, 10.1016/j.apenergy.2016.10.009 Jiaqiang, 2016, Field synergy analysis of the micro-cylindrical combustor with a step, Appl Therm Eng, 93, 83, 10.1016/j.applthermaleng.2015.09.028 Jiaqiang, 2016, Numerical investigation on hydrogen/air non-premixed combustion in a three-dimensional micro combustor, Energy Convers Manage, 124, 427, 10.1016/j.enconman.2016.07.048 Dean, 1928, LXXII. The stream-line motion of fluid in a curved pipe (second paper), Lond, Edinburgh, Dublin Philos Mag J Sci, 5, 673, 10.1080/14786440408564513 Mori, 1971, Forced convective heat transfer in a curved channel with a square cross section, Int J Heat Mass Transf, 14, 1787, 10.1016/0017-9310(71)90047-0 Facão, 2005, Modeling laminar heat transfer in a curved rectangular duct with a computational fluid dynamics code, Numerical Heat Transf Part A: Appl, 48, 165, 10.1080/10407780590948918 Kurnia, 2011, Evaluation of the heat transfer performance of helical coils of non-circular tubes, J Zhejiang Univ Sci A, 12, 63, 10.1631/jzus.A1000296 Wierzbicki, 2014, Performance of synthetic jet fuels in a meso-scale heat recirculating combustor, Appl Energy, 118, 41, 10.1016/j.apenergy.2013.12.021 Shirsat, 2013, Extinction, discharge, and thrust characteristics of methanol fueled meso-scale thrust chamber, Appl Energy, 103, 375, 10.1016/j.apenergy.2012.09.058 Vijayan, 2010, Flame dynamics of a meso-scale heat recirculating combustor, Appl Energy, 87, 3718, 10.1016/j.apenergy.2010.06.003 Vijayan, 2010, Combustion and heat transfer at meso-scale with thermal recuperation, Appl Energy, 87, 2628, 10.1016/j.apenergy.2010.03.011 Pizza, 2008, Dynamics of premixed hydrogen/air flames in microchannels, Combust Flame, 152, 433, 10.1016/j.combustflame.2007.07.013 Khandelwal, 2010, Investigations into the flame stability limits in a backward step micro scale combustor with premixed methane–air mixtures, J Micromech Microeng, 20, 095030, 10.1088/0960-1317/20/9/095030 Norton, 2003, Combustion characteristics and flame stability at the microscale: a CFD study of premixed methane/air mixtures, Chem Eng Sci, 58, 4871, 10.1016/j.ces.2002.12.005 Pizza, 2009, Suppression of combustion instabilities of premixed hydrogen/air flames in microchannels using heterogeneous reactions, Proc Combust Inst, 32, 3051, 10.1016/j.proci.2008.05.055 Fan, 2008, Regime diagrams and characteristics of flame patterns in radial microchannels with temperature gradients, Combust Flame, 153, 479, 10.1016/j.combustflame.2007.10.015 Licciulli, 2003, The challenge of high-performance selective emitters for thermophotovoltaic applications, Semicond Sci Technol, 18, S174, 10.1088/0268-1242/18/5/306 Ferguson, 2001, Spectrally selective, matched emitters for thermophotovoltaic energy conversion processed by tape casting, J Mater Sci, 36, 137, 10.1023/A:1004845205322 Xue, 2005, Microthermophotovoltaics power system for portable MEMS devices, Microscale Thermophys Eng, 9, 85, 10.1080/10893950590913431 Richecoeur, 2005, Experimental study of flame stabilization in low Reynolds and Dean number flows in curved mesoscale ducts, Proc Combust Inst, 30, 2419, 10.1016/j.proci.2004.08.015 He, 2014, Investigation of an unsteady flame propagating in a curved duct, Proc Eng, 71, 238, 10.1016/j.proeng.2014.04.034 Sitzki, 2001, Combustion in microscale heat-recirculating burners, 1087 Ronney, 2003, Analysis of non-adiabatic heat-recirculating combustors, Combust Flame, 135, 421, 10.1016/j.combustflame.2003.07.003 Weinberg, 2002, On thermoelectric power conversion from heat recirculating combustion systems, Proc Combust Inst, 29, 941, 10.1016/S1540-7489(02)80119-5 McBride BJ, Gordon S, Reno MA. Coefficients for calculating thermodynamic and transport properties of individual species. NASA report; 1993. J. W. Rose and J. R. Cooper e. Technical Data on Fuels. 7th ed: Wiley; 1977. Kuo, 2007, Numerical modeling of non-adiabatic heat-recirculating combustors, Proc Combust Inst, 31, 3277, 10.1016/j.proci.2006.08.082 Akhtar S, Kurnia JC, Khan M, Shamim T. A three-dimensional computational model of H2-air premixed combustion in a circular micro-channel for thermo-photovoltaic (TPV) application. In: 12th International conference on numerical analysis and applied mathematics, Rhodes, Greece; 2014. Magnussen BF. On the structure of turbulence and a generalized eddy dissipation concept for chemical reaction in turbulent flow. In: 19th AIAA aerospace meeting, St. Louis, USA; 1981. p. 198. Li, 2009, Experimental and numerical study of the wall temperature of cylindrical micro combustors, J Micromech Microeng, 19, 015019, 10.1088/0960-1317/19/1/015019 Kurnia, 2014, Evaluation of mass transport performance in heterogeneous gaseous in-plane spiral reactors with various cross-section geometries at fixed cross-section area, Chem Eng Process, 82, 101, 10.1016/j.cep.2014.06.004 Fraas L, Samaras J, Avery J, Minkin L. Antireflection coated refractory metal matched emitters for use with GaSb thermophotovoltaic generators. In: Photovoltaic specialists conference, 2000 conference record of the twenty-eighth IEEE. IEEE; 2000. p. 1020–3. Tong JK, Hsu W-C, Huang Y, Boriskina SV, Chen G. Thin-film ‘thermal well’emitters and absorbers for high-efficiency thermophotovoltaics. Scientific reports; 2015. p. 5. Karalis A, Joannopoulos J. ‘Squeezing’near-field thermal emission for ultra-efficient high-power thermophotovoltaic conversion. Scientific reports; 2016. p. 6. Enayet, 1982, Laser-Doppler measurements of laminar and turbulent flow in a pipe bend, Int J Heat Fluid Flow, 3, 213, 10.1016/0142-727X(82)90024-8