Optimization de la producción de lodos en un sistema de lodos activados a través de la calibración del modelo ASM1

Ingeniería, Investigación y Tecnología - Tập 16 - Trang 93-104 - 2015
M.A. Espinosa-Rodríguez1
1Programa de Ingeniería Química, Universidad Autónoma de Nayarií

Tài liệu tham khảo

Clesceri, 1989 Espinosa, 2012, Efecto de la temperatura en la tasa de crecimiento y decaimiento heterotrófico en el rango de 20-32°C en un proceso de lodos activados, Revista Mexicana de Ingeniería Química, 11, 309 Fall, 2007, Design of a Tracer Test Experience and Dynamic Calibration of the Hydraulic Model for a Full-Scale Wastewater Treatment Plant by Use of AQUASIM, Water Environment Research, 79, 893, 10.2175/106143007X176068 Fall, 2011, Stepwise Calibration of the Activated Sludge Model No. 1 at a Partially Denitrifying Large Wastewater Treatment Plant, Water Environment Research, 83, 2036, 10.1002/j.1554-7531.2011.tb00270.x Gürkan, 2005, Critical Comparison of Systematic Calibration Protocols for Activated Sludge Models: A SWOT Analysis, Water Research, 39, 2459, 10.1016/j.watres.2005.05.006 Henze, 1987, 37 Henze, 2002, 1 Hulsbeek, 2002, A Practical Protocol for Dynamic Modelling of Activated Sludge Systems, Water Science and Technology, 45, 127, 10.2166/wst.2002.0100 Langergraber, 2004, Guideline for Simulation Studies of Wastewater Treatment Plants, Water Science and Technology, 50, 131, 10.2166/wst.2004.0436 Meijer, 2002, Error Diagnostics and Data Reconciliation for Activated Sludge Modelling Using Mass Balances, Water Science and Technology, 45, 145, 10.2166/wst.2002.0102 Petersen, 2002, Evaluation of an ASM1 Model Calibration Procedure on a Municipal-Industrial Wastewater Treatment Plant, Journal of Hydroinformatics, 4, 15, 10.2166/hydro.2002.0003 2003, 596