Hydrodynamics of narrow-tube fixed bed reactors filled with Raschig rings

Atmakidis, 2009, CFD-based analysis of the wall effect on the pressure drop in packed beds with moderate tube/particle diameter ratios in the laminar flow regime, Chem. Eng. J., 155, 404, 10.1016/j.cej.2009.07.057 Augier, 2010, Numerical simulations of transfer and transport properties inside packed beds of spherical particles, Chem. Eng. Sci., 65, 1055, 10.1016/j.ces.2009.09.059 Bai, 2009, A coupled DEM and CFD simulation of flow field and pressure drop in fixed bed reactor with randomly packed catalyst particles, Ind. Eng. Chem. Res., 48, 4060, 10.1021/ie801548h Baker, 2011, Image based meshing of packed beds of cylinders at low aspect ratios using 3d MRI coupled with computational fluid dynamics, Comput. Chem. Eng., 35, 1969, 10.1016/j.compchemeng.2011.03.017 Behnam, 2013, A new approach to fixed bed radial heat transfer modeling using velocity fields from computational fluid dynamics simulations, Ind. Eng. Chem. Res., 52, 15244, 10.1021/ie4000568 Bey, 2001, Gas flow and heat transfer through catalyst filled tubes, Int. J. Therm. Sci., 40, 152, 10.1016/S1290-0729(00)01204-7 Bey, 1997, Fluid flow through catalyst filled tubes, 52 Boccardo, 2015, Validation of a novel open-source work-flow for the simulation of packed-bed reactors, Chem. Eng. J., 279, 809, 10.1016/j.cej.2015.05.032 Coussirat, 2007, Performance of stress-transport models in the prediction of particle-to-fluid heat transfer in packed beds, Chem. Eng. Sci., 62, 6897, 10.1016/j.ces.2007.08.071 Derkx, 1997, Effect of the wall Nusselt number on the simulation of catalytic fixed bed reactors, Catal. Today, 35, 435, 10.1016/S0920-5861(96)00210-6 Ding, 2005, Solids behaviour in a gas – solid two-phase mixture flowing through a packed particle bed, Chem. Eng. Res. Des., 60, 5231, 10.1016/j.ces.2005.04.052 Dixon, 1988, Correlations for wall and particle shape effects on fixed bed bulk voidage, Can. J. Chem. Eng., 66, 705, 10.1002/cjce.5450660501 Dixon, 2008, Wall-to-particle heat transfer in steam reformer tubes: CFD comparison of catalyst particles, Chem. Eng. Sci., 63, 2219, 10.1016/j.ces.2008.01.017 Dixon, 2013, Systematic mesh development for 3D CFD simulation of fixed beds: contact points study, Comput. Chem. Eng., 48, 135, 10.1016/j.compchemeng.2012.08.011 Dixon, 2006, Packed tubular reactor modeling and catalyst design using computational fluid dynamics, Adv. Chem. Eng., 31, 307, 10.1016/S0065-2377(06)31005-8 Dixon, 2005, CFD study of heat transfer near and at the wall of a fixed bed reactor tube : effect of wall conduction, Ind Eng. Chem. Res., 44, 6342, 10.1021/ie049183e Dixon, 2012, Experimental validation of high Reynolds number CFD simulations of heat transfer in a pilot-scale fixed bed tube, Chem. Eng. J., 200–202, 344, 10.1016/j.cej.2012.06.065 Dong, 2017, Investigation of radial heat transfer in a fixed-bed reactor: CFD simulations and profile measurements, Chem. Eng. J., 317, 204, 10.1016/j.cej.2017.02.063 Eppinger, 2011, DEM-CFD simulations of fixed bed reactors with small tube to particle diameter ratios, Chem. Eng. J., 166, 324, 10.1016/j.cej.2010.10.053 Ergun, 1952, Fluid flow through packed columns, Chem. Eng. Prog., 48, 89 Fernengel, 2018, Influence of cylinder-to-particle diameter ratio and filling speed on bed porosity of random packed beds of spheres, Computer Aid. Chem. Eng. Elsevier Masson, SAS, 97, 10.1016/B978-0-444-64235-6.50019-X Flaischlen, 2019, Synthetic packed-bed generation for CFD simulations: blender vs STAR-CCM+, Chem. Eng., 3 Freund, 2005, Detailed simulation of transport processes in fixed-beds, Ind. Eng. Chem. Res., 44, 6423, 10.1021/ie0489453 Freund, 2003, Numerical simulations of single phase reacting flows in randomly packed fixed-bed reactors and experimental validation, Chem. Eng. Sci., 58, 903, 10.1016/S0009-2509(02)00622-X Giese, 1998, Measured and modeled superficial flow profiles in packed beds with liquid flow, AIChE J., 44, 484, 10.1002/aic.690440225 Guardo, 2005, Influence of the turbulence model in CFD modeling of wall-to-fluid heat transfer in packed beds, Chem. Eng. Sci., 60, 1733, 10.1016/j.ces.2004.10.034 Guardo, 2004, CFD flow and heat transfer in nonregular packings for fixed bed equipment design, Ind. Eng. Chem. Res., 43, 7049, 10.1021/ie034229+ Guardo, 2007, CFD studies on particle-to-fluid mass and heat transfer in packed beds: Free convection effects in supercritical fluids, Chem. Eng. Sci., 62, 5503, 10.1016/j.ces.2007.02.040 Guo, 2019, Influence of flow guiding conduit on pressure drop and convective heat transfer in packed beds, Int. J. Heat Mass Transf., 134, 489, 10.1016/j.ijheatmasstransfer.2019.01.066 Jafari, 2008, Modeling and CFD simulation of flow behavior and dispersivity through randomly packed bed reactors, Chem. Eng. J., 144, 476, 10.1016/j.cej.2008.07.033 Kwapinski, 2004, Modeling of the wall effect in packed bed adsorption, Chem. Eng. Technol., 27, 1179, 10.1002/ceat.200407001 Lu, 2015, Discrete element models for non-spherical particle systems: From theoretical developments to applications, Chem. Eng. Sci., 127, 425, 10.1016/j.ces.2014.11.050 Magnico, 2003, Hydrodynamic and transport properties of packed beds in small tube-to-sphere diameter ratio: pore scale simulation using an Eulerian and a Lagrangian approach, Chem. Eng. Sci., 58, 5005, 10.1016/S0009-2509(03)00282-3 Moghaddam, 2019, Fxed bed reactors of non-spherical pellets : Importance of heterogeneities and inadequacy of azimuthal averaging, Chem. Eng. Sci. X, 1 Moghaddam, 2018, Rigid body dynamics algorithm for modeling random packing structures of nonspherical and nonconvex pellets, Ind. Eng. Chem. Res., 57, 14988, 10.1021/acs.iecr.8b03915 Nemec, 2005, Flow through packed bed reactors: 1, Single-phase flow. Chem. Eng. Sci., 60, 6947, 10.1016/j.ces.2005.05.068 Nijemeisland, 2004, CFD Study of fluid flow and wall heat transfer in a fixed bed of spheres, AIChE J., 50, 906, 10.1002/aic.10089 Nijemeisland, 2001, Comparison of CFD simulations to experiment for convective heat transfer in a gas-solid fixed bed, Chem. Eng. J., 82, 231, 10.1016/S1385-8947(00)00360-0 Nijemeisland, 2004, Catalyst design by CFD for heat transfer and reaction in steam reforming, Chem. Eng. Sci., 5185, 10.1016/j.ces.2004.07.088 Partopour, 2017, An integrated workflow for resolved-particle packed bed models with complex particle shapes, Powder Technol., 322, 258, 10.1016/j.powtec.2017.09.009 Rakotonirina, 2018, Grains3D, a flexible DEM approach for particles of arbitrary convex shape—Part III: extension to non-convex particles modelled as glued convex particles, Comput. Part. Mech., 324, 1 Robbins, 2012, CFD modeling of single-phase flow in a packed bed with MRI validation, AIChE J., 58, 3904, 10.1002/aic.13767 Seelen, 2018, A granular discrete element method for arbitrary convex particle shapes: method and packing generation, Chem. Eng. Sci., 189, 84, 10.1016/j.ces.2018.05.034 Singhal, 2017, Heat transfer to a gas from densely packed beds of monodisperse spherical particles, Chem. Eng. J., 314, 27, 10.1016/j.cej.2016.12.124 Singhal, 2017, Heat transfer to a gas from densely packed beds of cylindrical particles, Chem. Eng. Sci., 172, 1, 10.1016/j.ces.2017.06.003 Sonntag, 1960, Einfluß des Lückenvolumens auf den Druckverlust in gasdurchströmten Füllkörpersäulen, Chemie Ing. Tech., 32, 317, 10.1002/cite.330320502 Standish Subagyo, 1998, A new model of velocity distribution of a single-phase fluid flowing in packed beds, Chem. Eng. Sci., 53, 1375, 10.1016/S0009-2509(97)00444-2 Taskin, 2008, CFD study of the influence of catalyst particle design on steam reforming reaction heat effects in narrow packed tubes, Ind. Eng. Chem. Res., 47, 5966, 10.1021/ie800315d Wehinger, 2015, Evaluating catalytic fixed-bed reactors for dry reforming of methane with detailed CFD, Chemie-Ingenieur-Technik, 87, 10.1002/cite.201400153 Wehinger, 2015, Detailed numerical simulations of catalytic fixed-bed reactors: Heterogeneous dry reforming of methane, Chem. Eng. Sci., 122, 197, 10.1016/j.ces.2014.09.007 Wehinger, 2017, Contact modifications for CFD simulations of fixed-bed reactors: Cylindrical particles, Ind. Eng. Chem. Res., 56, 87, 10.1021/acs.iecr.6b03596 Winterberg, 2000, Modelling of heat transport in beds packed with spherical particles for various bed geometries and/or thermal boundary conditions, Int. J. Therm. Sci., 39, 556, 10.1016/S1290-0729(00)00251-9 Winterberg, 2000, Correlations for effective heat transport coefficients in beds packed with cylindrical particles, Chem. Eng. Sci., 55, 5937, 10.1016/S0009-2509(00)00198-6 Winterberg, 2000, Impact of tube-to-particle-diameter ratio on pressure drop in packed beds, AIChE J., 46, 1084, 10.1002/aic.690460519 Winterberg, 2000, A simple and coherent set of coefficients for modelling of heat and mass transport with and without chemical reaction in tubes filled with spheres, Chem. Eng. Sci., 55, 967, 10.1016/S0009-2509(99)00379-6 Zhong, 2016, DEM/CFD-DEM Modelling of Non-spherical Particulate Systems: Theoretical Developments and Applications, Powder Technol., 302, 108, 10.1016/j.powtec.2016.07.010 Dixon, 2001, CFD as a design tool for fixed-bed reactors, Ind. Eng. Chem. Res., 5246, 10.1021/ie001035a Mueller, 1993, Angular void fraction distributions in randomly packed fixed beds of uniformly sized spheres in cylindrical containers, Powder Technol., 77, 313, 10.1016/0032-5910(93)85023-3