Time-dependent reliability analysis for function generation mechanisms with random joint clearances

Erkaya, 2009, Determining link parameters using genetic algorithm in mechanisms with joint clearance, Mech. Mach. Theory, 44, 222, 10.1016/j.mechmachtheory.2008.02.002 Zhu, 2000, Uncertainty analysis of planar and spatial robots with joint clearances, Mech. Mach. Theory, 35, 1239, 10.1016/S0094-114X(99)00076-2 Tsai, 2004, Kinematic sensitivity analysis of linkage with joint clearance based on transmission quality, Mech. Mach. Theory, 39, 1189, 10.1016/j.mechmachtheory.2004.05.009 Tsai, 2008, Accuracy analysis of a multi-loop linkage with joint clearances, Mech. Mach. Theory, 43, 1141, 10.1016/j.mechmachtheory.2007.09.001 Ting, 2000, The effects of joint clearance on position and orientation deviation of linkages and manipulators, Mech. Mach. Theory, 35, 391, 10.1016/S0094-114X(99)00019-1 Parenti-Castelli, 2005, Clearance influence analysis on mechanisms, Mech. Mach. Theory, 40, 1316, 10.1016/j.mechmachtheory.2005.04.002 Flores, 2004, Revolute joints with clearance in multibody systems, Comput. Struct., 82, 1359, 10.1016/j.compstruc.2004.03.031 Erkaya, 2013, Trajectory optimization of a walking mechanism having revolute joints with clearance using ANFIS approach, Nonlinear Dyn., 71, 75, 10.1007/s11071-012-0642-5 Erkaya, 2012, Investigation of joint clearance effects on welding robot manipulators, Robot. Comput.-Integr. Manuf., 28, 449, 10.1016/j.rcim.2012.02.001 Flores, 2006, A study on dynamics of mechanical systems including joints with clearance and lubrication, Mech. Mach. Theory, 41, 247, 10.1016/j.mechmachtheory.2005.10.002 Flores, 2009, Modeling and simulation of wear in revolute clearance joints in multibody systems, Mech. Mach. Theory, 44, 1211, 10.1016/j.mechmachtheory.2008.08.003 Tian, 2011, A new model for dry and lubricated cylindrical joints with clearance in spatial flexible multibody systems, Nonlinear Dyn., 64, 25, 10.1007/s11071-010-9843-y Flores, 2011, Numerical and experimental investigation on multibody systems with revolute clearance joints, Nonlinear Dyn., 65, 383, 10.1007/s11071-010-9899-8 Flores, 2010, On the contact detection for contact–impact analysis in multibody systems, Multibody Syst. Dyn., 24, 103, 10.1007/s11044-010-9209-8 Varedi, 2015, Optimal dynamic design of a planar slider–crank mechanism with a joint clearance, Mech. Mach. Theory, 86, 191, 10.1016/j.mechmachtheory.2014.12.008 Zhang, 2014, A kriging model for the dynamics of mechanical systems with revolute joint clearances, J. Comput. Nonlinear Dyn., 9, 031013, 10.1115/1.4026233 Zhang, 2014, Dynamic analysis of a 3-RRR parallel mechanism with multiple clearance joints, Mech. Mach. Theory, 78, 105, 10.1016/j.mechmachtheory.2014.03.005 Erkaya, 2009, Optimization of transmission angle for slider–crank mechanism with joint clearances, Struct. Multidiscip. Optim., 37, 493, 10.1007/s00158-008-0243-6 Erkaya, 2008, A neural–genetic (NN–GA) approach for optimising mechanisms having joints with clearance, Multibody Syst. Dyn., 20, 69, 10.1007/s11044-008-9106-6 Innocenti, 2002, Kinematic clearance sensitivity analysis of spatial structures with revolute joints, J. Mech. Des., 124, 52, 10.1115/1.1436088 Chebbi, 2009, Prediction of the pose errors produced by joints clearance for a 3-UPU parallel robot, Mech. Mach. Theory, 44, 1768, 10.1016/j.mechmachtheory.2009.03.006 Frisoli, 2011, A new screw theory method for the estimation of position accuracy in spatial parallel manipulators with revolute joint clearances, Mech. Mach. Theory, 46, 1929, 10.1016/j.mechmachtheory.2011.07.004 Meng, 2009, Accuracy analysis of parallel manipulators with joint clearance, J. Mech. Des., 131, 011013, 10.1115/1.3042150 Wu, 2007, Uncertainty analysis and allocation of joint tolerances in robot manipulators based on interval analysis, Reliab. Eng. Syst. Saf., 92, 54, 10.1016/j.ress.2005.11.009 Chen, 2013, A unified approach to the accuracy analysis of planar parallel manipulators both with input uncertainties and joint clearance, Mech. Mach. Theory, 64, 1, 10.1016/j.mechmachtheory.2013.01.005 Wang, 2011, Hybrid dimension reduction for mechanism reliability analysis with random joint clearances, Mech. Mach. Theory, 46, 1396, 10.1016/j.mechmachtheory.2011.05.008 Dhande, 1977, Mechanical error analysis of spatial linkages, J. Mech. Des., 100, 732, 10.1115/1.3454001 Xu, 1989, Probabilistic analysis and Monte Carlo simulation of the kinematic error in a spatial linkage, Mech. Mach. Theory, 24, 19, 10.1016/0094-114X(89)90078-5 Chakraborty, 1975, Synthesis of mechanical error in linkages, Mech. Mach. Theory, 10, 155, 10.1016/0094-114X(75)90016-6 Mallik, 1987, Analysis and synthesis of mechanical error in path-generating linkages using a stochastic approach, Mech. Mach. Theory, 22, 115, 10.1016/0094-114X(87)90034-6 Choi, 1998, Stochastic linkage modeling for mechanical error analysis of planar mechanisms, Mech. Struct. Mach., 26, 257, 10.1080/08905459708945494 Bhatti, 1989 Du, 2009, Robust mechanism synthesis with random and interval variables, Mech. Mach. Theory, 44, 1321, 10.1016/j.mechmachtheory.2008.10.003 Shi, 2005, Robust synthesis of path generating linkages, Mech. Mach. Theory, 40, 45, 10.1016/j.mechmachtheory.2004.05.008 Pandey, 2012, System reliability analysis of the robotic manipulator with random joint clearances, Mech. Mach. Theory, 58, 137, 10.1016/j.mechmachtheory.2012.08.009 Kim, 2010, Stochastic approach to kinematic reliability of open-loop mechanism with dimensional tolerance, Appl. Math. Model., 34, 1225, 10.1016/j.apm.2009.08.009 Zhang, 2011, Time-dependent probabilistic synthesis for function generator mechanisms, Mech. Mach. Theory, 46, 1236, 10.1016/j.mechmachtheory.2011.04.008 zhang, 2010, Time-dependent reliability analysis for function generator mechanisms, J. Mech. Des., 133, 031005, 10.1115/1.4003539 Du, 2014, Time-dependent mechanism reliability analysis with envelope functions and first-order approximation, J. Mech. Des., 136, 081010, 10.1115/1.4027636 DeVuyst, 2007, Gaussian cubature: a practitioner's guide, Math. Comput. Model., 45, 787, 10.1016/j.mcm.2006.07.021 Abramowitz, 1964